Version 1
Board Sends To Second-Notice A Proposed Rulemaking to Revise the Board’s Regulations For Air Construction And Operating Permits | |
January 5, 2006 - On January 5, 2006, the Illinois Pollution Control Board sent to second-notice the rulemaking proposal docketed as In the Matter of: Proposed Amendments to Exemptions From State Permitting Requirements for Plastic Injection Molding Operations (35 Ill. Adm. Code 201.146) (R05-20). The proposal by the Chemical Industry Council of Illinois (CICI) would add plastic injection molding operations to the existing list of 59 permit exemptions in Section 201.146. CICI asserts the purpose of this rulemaking is to reduce the burden of state air permitting of low emitting units and activities for the Illinois Environmental Protection Agency (IEPA) as well as owners and operators of plastic injection molding processes. | |
Handle: | Document-86298 |
Owner: | Site Administrator (User-2, admin:DocuShare)DS |
Tuesday, October 14, 2014 01:46:33 PM CDT | |
Tuesday, October 31, 2017 05:40:27 PM CDT | |
Modified By: | Site Administrator (User-2, admin:DocuShare)DS |
Locked By: | |
| |
Allowed | |
Adobe Portable Document Format (.pdf) - application/pdf | |
Plastic05-20 060105.pdf | |
No | |
1 | |
10692 | |
No | |
Appears In: | Calendar Year 2006 |
Preferred Version: | Board Sends To Second-Notice A Proposed Rulemaking to Revise the Board’s Regulations For Air Construction And Operating Permits |