))))) R 05-20IN THE MATTER OF: )) PROPOSED AMENDMENTS TOEXEMPTIONS FROM STATEPERMITTING REQUIREMENTSFOR PLASTIC INJECTION MOLDINGOPERATIONS(35 III.
The permitting exemptions in this Section do not relieve the owner or operator
of any source from any obligation to comply with any other applicable requirements,including the obligation to obtain a permit pursuant to Sections 9.1(d) and 39.5 of theAct, Sections 165, 173, and 502 of the Clean Air Act or any other applicable permit orregistration requirements.
referred to herein as PMJ,
and a variety of hazardous air pol...
Allowed
Adobe Portable Document Format (.pdf) - application/pdf
... 
