ILLINOIS POLLUTION CONTROL BOARD

October 23, 1986

IN THE MATTER OF:

RCRA

UPDATE, USEPA REGULATIONS

)

R86-l9

(2/1/86 THROUGH 3/31/86)

FINAL ORDER.

ADOPTED RULE.

ORDER OF THE BOARD

(by 3. Anderson):

On July 11,

1986,

the Board proposed to amend

the RCRA rules

to correspond with United States Environmental protection Agency

amendments adopted between January 31 and March

31,

1986.

The

proposal was published on August 15,

1986,

at 10 Ill. Reg.

13998.

The Board received public comment as

is detailed

in the

accompanying Opinion.

The text of the amendments as modified

appears below.

The Board directs that the amendments be filed

and published

in the Illinois Register no sooner than November

19,

1986.

The Board will withhold filing until after

that date

to receive any final motions from the agencies involved with RCRA

authorization.

The complete text of the adopted amendments

is as follows.

Striking and underlining

refer

to the text of the rules as

amended

in docket R86—1.

TITLE

35:

ENVIRONMENTAL PROTECTION

SUBTITLE G:

WASTE DISPOSAL

CHAPTER

I:

POLLUTION CONTROL BOARD

SUBCHAPTER b:

PERMITS

PART

703

RCRA PERMIT PROGRAM

SUBPART A:

GENERAL PROVISIONS

Section

703.100

Scope and Relation to Other Parts

703.101

Purpose

703.110

References

SUBPART B:

PROHIBITIONS

Section

703.120

Prohibitions

in General

703.121

RCRA Permits

703.122

Specific Inclusions

in Permit Program

703.123

Specific Exclusions from Permit Program

703.124

Discharges of Hazardous Waste

73-475

---

—2--

Purpose and Scope

Permits by Rule

Application by Existing HWM Facilities and Interim

Status Qualifications

Application by New HWM Facilities

Amended Part A Application

Qualifying

for Interim Status

Prohibitions During Interim Status

Changes During Interim Status

Interim Status Standards

Grounds for Termination of Interim Status

Permits for Less Than an Entire Facility

Section

703.180

703.181

703

.

182

703.183

703.184

703.185

703.186

703. 200

703.201

703.202

703 .203

703. 204

703

.

205

703. 206

703

.

207

Applications

in General

Contents of Part A

Contents of Part B

General Information

Facility Location Information

Ground-water Protection Information

Exposure Information

Specific Information

Containers

Tanks

Surface Impoundments

Waste Piles

Incinerators

Land Treatment

Landfills

SUBPART E:

SHORT TERM AND PHASED PERMITS

Emergency Permits

Incinerator Conditions Prior to Trial

Burn

Incinerator Conditions During Trial Burn

Incinerator Conditions After Trial Burn

Trial Burns

for Existing Incinerators

Land Treatment Demonstration

Research, Development and Demonstration Permits

SUBPART F:

PERMIT CONDITIONS

Section

703.241

Establishing Permit Conditions

Reapplications

Initial Applications

Federal Permits

(Repealed)

SUBPART C:

AUTHORIZATION BY RULE AND INTERIM STATUS

703.125

703.126

703.127

Section

703.140

703.141

703.150

703.151

703.152

703

.

153

703.154

703.155

703.156

703.157

703.158

SUBPART

D:

APPLICATIONS

Section

703.221

703. 222

703.223

703. 224

703.225

703. 230

703

231

73.476

---

—3--

703.242

Noncompliance Pursuant to Emergency Permit

703.243

Monitoring

703.244

Notice of Planned Changes

703.245

Release or Discharge Reports

703.246

Reporting Requirements

AUTHORITY:

Implementing Section 22.4 and authorized by Section

27 of the Environmental Protection Act

(I1l~. Rev.

Stat.

1985,

ch.

ill 1/2, pars. 1022.4 and 1027).

SOURCE:

Adopted

in R82—l9,

53 PCB 131, at

7

Ill. Reg.

14289,

effective October

12,

1983;

amended

in R83-24 at 8

Ill. Reg.

206,

effective December

27, 1983;

amended

in R84—9

at 9

Ill. Reg.

11899,

effective July 24,

1985; amended

in R85—23 at 10

Ill. Reg.

13284,

effective July 29,

1986;

amended

in R86—l at

10

Ill. Reg.

14093,

effective August 12,

1986;

amended

in R86—l9 at 10

Ill.

Reg.

,

effective

SUBPART

B:

PROHIBITIONS

Section 703.123

Specific Exclusions from Permit Program

The following persons are among those who are not required to

obtain a RCRA permit:

a)

Generators who accumulate hazardous waste on—site for

less than 99

deys-~res the time periods provided

in 35

Ill.

AdTn.

Code 722.134;

b)

Farmers who dispose

of hazardous waste pesticides from

their own use as provided in 35

Ill. Adm. Code 722.151;

c)

Persons who own or operate facilities solely for the

treatment, storage or disposal of hazardous waste

excluded from regulations under this Part by 35 Ill.

Adm. Code 721.104 or

721.105 (small generator

exemption);

d)

Owners or operators of totally enclosed treatment

facilities as defined

in 35 Ill. Adm. Code 720.110;

f)

Owners and operators of elementary neutralization units

or wastewater treatment units as defined

in 35

Ill. Adm.

Code 720.110;

g)

Transporters storing manifested shipments of hazardous

waste in containers meeting the requirements of 35 Ill.

Adm.

Code 722.130

at

a

transfer facility for

a period of

ten days or

less;

h)

Persons adding absorbent material

to waste in

a

container (as defined

in 35

Ill. Adm. Code 720.110)

and

persons adding waste

to absorbent material

in

a

73-477

---

—4.-

container, provided that these actions occur at the time

waste

is first placed

in the container;

and 35

Ill. Adm.

Code 724.117(b),

724.271 and 724.272 are complied with.

(Board Note:

See 40 CFR ~22

d++~ 270.1(c) (2))

(Source:

Amended at 10

Ill Reg.

effective

)

SUBPART C:

AUTHORIZATION BY RULE AND INTERIM STATUS

Section 703.150

Application by Existing

HWM

Facilities and

Interim Status Qualifications

a)

The owner or operator of an existing HWM facility or

of

an HWM facility in existence on the effective date of

statutory or

regulatory amendments

that render the

facility subject

to the requirement

to have

a RCRA

permit must submit Part A of the permit application to

the Agency no later than the following times,

whichever

comes first:

1)

Six months after

the date of publication of

regulations which first require the owner or

operator

to comply with standards

in 35

Ill. Adm.

Code 725; or

2)

Thirty days after the date

the owner or oper&tor

first becomes subject to the standards in 35 ‘ill.

Adm. Code 725;

3)

For generators which generate greater than 100

kilograms but less than 1000 kilograms of hazardous

waste

in

a calendar month and treat,

store or

dispose of these wastes on—site,

by March 24,

1987.

b)

The owner

or

operator of an existing HWM facility may be

required

to submit Part B of the permit application at

any time after the effective date of standards in 35

Ill. Adm. Code 724 applicable to any TSD unit at the

facility.

The Agency will notify the owner or operator

that a Part B application

is required, and set

a date

for receipt of the application, not less than six months

after the date the notice is sent.

The owner

or

operator may voluntarily submit a Part B application for

all or part of the HWM facility at any time.

c)

The time for filing Part A of the permit application may

be extended only by a Board Order entered pursuant to

a

variance petition.

The Board will consider whether

there

1-ias been substantial confusion as

to whether the

owner

or operator

of such facilities were required to

file a Part A application and whether such confusion was

73-478

---

—5.--

attributable to ambiguities in 35

Ill. Adm. Code 720,

721 or

725.

d)

Notwithstanding

the above,

any owner or operator of an

existing HWM facility must submit a Part B permit

application

in accordance with the dates specified in

Section 703.157.

Any owner or operator

of

a land

disposal facility in existence on the effective date of

statutory or regulatory amendments which render

the

facility subject to the requirement to have

a RCRA

permit must submit a Part B application in accordance

with the dates specified in Section 703.157.

e)

Interim status may be terminated as provided in Section

703.157.

(Board Note:

See

40 CFR 270.10(e).)

(Source:

Amended

at 10

Ill.

Reg.

effective

73-479

---

—6--

TITLE

35:

ENVIRONMENTAL PROTECTION

SUBTITLE G:

WASTE DISPOSAL

CHAPTER

I:

POLLUTION CONTROL BOARD

SUBCHAPTER

c:

HAZARDOUS WASTE

OPERATING REQUIREMENTS

PART 720

HAZARDOUS WASTE MANAGEMENT

SYSTEM:

GENERAL

SUBPART A:

GENERAL PROVISIONS

Section

720.101

Purpose, Scope and Applicability

720.102

Availability of Information;

Confidentiality of

Information

720.103

Use of Number and Gender

SUBPART B:

DEFINITIONS

Section

720.110

Definitions

720.111

References

SUBPART

C:

RULEMAKING PETITIONS AND OTHER PROCEDURES

Section

720.120

Rulemaking

720.121

Alternative Equivalent Testing Methods

720.122

Waste Delisting

720.130

Procedures

for Solid Waste Determinations

720.131

Solid Waste Determinations

720.132

Boiler Determinations

720.133

Procedures for Determinations

720.140

Additional regulation of certain hazardous waste

Recycling Activities on a case—by—case Basis

720.141

Procedures

for case—by—case regulation of hazardous

waste Recycling Activities

Appendix A

Overview of 40 CFR, Subtitle C Regulations

AUTHORITY:

Implementing Section 22.4 and authorized by Section

27 of the Environmental Protection Act

(Ill. Rev.

Stat.

1985,

ch.

111 1/2, pars.

1022.4 and 1027).

/

SOURCE:

Adopted

in R81-22,

43 PCB 427,

at 5

Ill.

Reg.

9781,

effective as noted in 35 Ill. Adm. Code 700.106; amended and

codified in R8l—22,

45 PCB 317,

at

6 Ill.

Reg.

4828, effective as

noted in 35

Ill.

Adrn.

Code 700.106;

amended

in R82—19 at

7

Ill.

Reg.

14015,

effective Oct.

12,

1983;

amended

in R84—9,

53 PCB

131

at

9

Ill.

Reg.

11819,

effective July 24,

1985; amended

in R85—22

at

10 Ill. Reg.

968, effective January

2, 1986;

amended

in R86—1

at

10 Ill.

Reg.

13998, effective August 12,

1986;

amended

in R86—

19

at 10 Ill.

Reg.

,

effective

73-480

---

—7—

SUBPART B:

DEFINITIONS

Section 720.110

Definitions

When used

in 35

Ill. Adm. Code 720 through 725 only, the

following

terms have the meanings given below:

“Act”

or

“RCRA”

means the Solid Waste Disposal Act, as

amended by the Resource Conservation and Recovery Act of

1976,

as amended

(42 U.S.C. Section 6901 et seq.)

“Active portion~means that portion of

a facility where

treatment, storage or disposal operations are being or

have been conducted after May 19,

1980 and which is not

a closed portion.

(See also “closed portion” and

“inactive portion”.)

“Administrator” means

the Administrator of the U.S.

Environmental Protection Agency or his designee.

“Agency” means the Illinois Environmental Protection

Agency.

“Aquifer” means

a geologic formation, group of

formations or part of

a formation capable of yielding a

significant amount of groundwater

to wells or springs.

“Authorized representative” means the person responsible

for the overall operation of

a facility or an

operational

unit (i.e., part of

a facility), e.g., the

plant manager, superintendent or person of equivalent

responsibility.

“Board” means the Illinois Pollution Control Board.

“Boiler” means an enclosed device using controlled flame

combustion and having the following characteristics:

The unit must have physical provisions

for

recovering and exporting thermal energy in the form

of steam,

heated fluids or heated gases; and the

unit’s combustion chamber and primary energy

recovery section(s) must be of integral design.

To

be of integral design, the combustion chamber and

the primary energy recovery section(s)

(such as

waterwalls and superheaters) must be physically

formed into one manufactured or assembled unit.

A

unit

in which the combustion chamber and the

primary energy recovery section(s)

are joined only

by ducts or connections carrying flue gas

is not

integrally designed; however, secondary energy

recovery equipment

(such as economizers

or air

preheaters)

need not be physically formed into the

same unit as

the combustion chamber and the primary

73.481

---

—8—

energy recovery section.

The following units are

not precluded from being boilers solely because

they are not of integral design:

process heaters

(units that transfer energy directly to

a process

stream), and fluidized bed combustion units; and

While

in operation, the unit must maintain a

thermal energy recovery efficiency of at least 60

percent, calculated

in terms of the recovered

energy compared with the thermal value of the fuel;

and

The unit must export and utilize at least 75

percent of the recovered energy, calculated on an

annual basis.

In this calculation,

no credit shall

be given for recovered heat used internally in the

same unit.

(Examples of internal use are the

preheating of fuel or combustion air, and the

driving of induced or

forced draft fans or

feedwater pumps); or

The unit

is one which the Board has determined, on

a case—by—case basis, to be

a boiler, after

considering the standards

in Section 720.132.

“Certification” means

a statement of professional

opinion based upon knowledge and belief.

“Closed Portion” means that portion of

a facility which

an owner

or operator has closed

in accordance with the

approved facility closure plan and all applicable

closure requirements.

(See also “active portion” and

“inactive portion”.)

“Confined aquifer” means an aquifer bounded above and

below by impermeable beds or by beds of distinctly lower

permeability than that of the aquifer itself;

an aquifer

containing confined groundwater.

“Container” means any portable device in which a

material

is stored,

transported, treated, disposed of or

otherwise handled.

“Contingency plan” means

a document setting out an

organized,

planned and coordinated course of action to

be followed in case of

a

fire,

explosion or

release of

hazardous waste or hazardous waste constituents which

could threaten human health or

the environment.

“Designated facility” means

a hazardous waste treatment,

storage or disposal facility which has received an EPA

permit

(or

a facility with interim status)

in accordance

with the requirements of

40 CFR 270 and 124

or

a permit

from

a state authorized

in accordance with 40 CFR 271,

73-482

---

—9.-

or that is regulated under

40 CFR 26l.6(c)(2)

or 40 CFR

266.Subpart F or 35

Ill. Adm. Code 721.106(c)(2) or

726.Subpart F and that has been designated on the

manifest by the generator pursuant to 35

Ill. Adm. Code

722.120.

“Dike” means an embankment or ridge of either natural or

manmade materials used to prevent the movement of

liquids, sludges,

solids or other materials.

“Director” means the Director of the Illinois

Environmental Protection Agency.

“Discharge” or “hazardous waste discharge” means the

accidental or

intentional spilling, leaking, pumping,

pouring, emitting, emptying

or dumping of hazardous

waste

into or on any land or water.

“Disposal” means the discharge, deposit, injection,

dumping, spilling, leaking or placing of any solid waste

or hazardous waste

into or on any land or water

so that

such solid waste or hazardous waste or any constituent

thereof may enter the environment or be emitted into the

air or discharged into any waters,

including

groundwaters.

“Disposal facility” means

a facility or part of a

facility at which hazardous waste is intentionally

placed

into or on any land or water and at which waste

will remain after closure.

“Elementary neutralization unit” means a device which:

Is used

for neutralizing wastes which are hazardous

wastes only because they exhibit the corrosivity

characteristic defined

in 35

Ill. Mm.

Code 721.122

or are listed

in 35 Ill. Adm.

Code 721.Subpart D

only for this reason; and

Meets the definition of tank, container,

transport

vehicle or vessel

in Section 720.110.

“EPA” means United States Environmental Protection

Agency.

“EPA hazardous waste number” means the number assigned

by EPA to each hazardous waste listed in 35

Ill. Adm.

Code 721.Subpart D and to each characteristic identified

in 35

Ill. Adm. Code 721.Subpart C.

“EPA identification number” means the number

assigned by

USEPA pursuant to 35

Ill. Adm. Code 722 through 725

to

each generator, transporter and treatment, storage or

disposal facility.

73-483

---

—10--

“EPA region” means

the states and territories found

in

any one of the following ten regions:

Region

I:

Maine, Vermont, New Hampshire,

Massachusetts, Connecticut and Rhode Island

Region II:

New York, New Jersey, Commonwealth of

Puerto Rico and the U.S. Virgin Islands

Region III:

Pennsylvania, Delaware, Maryland, West

Virginia, Virginia and the District of Columbia

Region IV:

Kentucky, Tennessee, North Carolina,

Mississippi, Alabama, Georgia,

South Carolina and

Florida

Region V:

Minnesota, Wisconsin, Illinois,

Michigan, Indiana and Ohio

Region VI:

New Mexico, Oklahoma, Arkansas,

Louisiana and Texas

Region VII:

Nebraska, Kansas, Missouri and Iowa

Region VIII:

Montana, Wyoming, North Dakota, South

Dakota, Utah and Colorado

Region

IX:

California, Nevada, Arizona, Hawaii,

Guam, American Samoa and Commonwealth of the

Northern Mariana Islands

Region

X:

Washington, Oregon,

Idaho and Alaska

“Equivalent method” means any testing or analytical

method approved

by the Board pursuant

to Section

720.120.

“Existing hazardous waste management

(HWM)

facility” or

“existing facility” means a facility which was

in

operation or for which construction commenced on or

before November

19,

1980.

A facility had commenced

construction if:

The owner

or operator had obtained the federal,

state and local approvals or permits necessary to

begin physical construction and either

A continuous on—site, physical construction

program had begun or

The owner or operator had entered into

contractual obligations——which could not be

cancelled or modified without substantial

loss——for physical construction of the

73-484

---

—11—

facility to be completed within

a reasonable

time.

“Existing portion” means that land surface area of an

existing waste management unit,

included in the original

Part A permit application, on which wastes have been

placed

prior

to the issuance of a permit.

“Facility” means all contiguous land and structures,

other appurtenances and improvements on the land used

for treating, storing

or disposing of hazardous waste.

A facility may consist of several treatment, storage or

disposal operational

units

(e.g., one or more landfills,

surface impoundments or combinations of them).

“Federal agency” means any department, agency or other

instrumentality of the federal government, any

independent agency or establishment of the federal

government including any government corporation and the

Government Printing Office.

“Federal,

state and local approvals or permits necessary

to begin physical construction” means permits and

approvals required under federal, state

or local

hazardous waste

control

statutes, regulations or

ordinances.

“Food—chain crops” means tobacco, crops grown for human

consumption and crops grown

for feed for animals whose

products are consumed by humans.

“Freeboard” means the vertical distance between the top

of

a tank or surface

impoundment dike and the surface of

the waste contained therein.

“Free liquids” means liquids which readily separate from

the solid portion of

a waste under ambient temperature

and pressure.

“Generator” means any person, by site, whose act or

process produce hazardous waste identified or listed in

35 Ill.

Adm. Code 721

or whose act first causes

a

hazardous waste to become subject to regulation.

“Groundwater” means water below the land surface

in a

zone of saturation.

“Hazardous waste” means a hazardous waste as defined

in

35

Ill. Mm. Code 721.103.

“Hazardous waste constituent” means

a constituent which

caused the hazardous waste to be listed

in 35 Ill.

Adm.

Code 72l.Subpart

D, or

a constituent listed

in of

35

Ill.

Adm. Code 721.124.

73-485

---

—12—

“Inactive portion” means that portion of

a facility

which is not operated after November

19,

1980.

(See

also “active portion”

and “closed portion”.)

“Incinerator” means any enclosed device using controlled

flame combustion which

is neither

a “boiler” nor

an

“industrial furnace”

“Incompatible waste” means

a hazardous waste which

is

suitable for:

Placement in a particular device or facility

because it may cause corrosion or decay of

containment materials (e.g., container

inner liners

or

tank walls);

or

Commingling with another waste or material under

uncontrolled conditions because the commingling

might produce heat or pressure, fire or explosion,

violent reaction, toxic dusts, mists,

fumes or

gases or flammable fumes or gases.

(See 35 Ill. Mm.

Code 725, Appendix

E

for

examples.)

“Industrial

furnace” means any of the following enclosed

devices that are integral components of manufacturing

processes and

that use controlled flame devices to

accomplish recovery of materials or energy:

Cement kilns

Lime kilns

Aggregate kilns

Phosphate kilns

Coke ovens

Blast furnaces

Smelting, melting and refining furnaces

(including

pyrometallurgical devices such as cupolas,

reverberator furnaces, sintering machines, roasters

and foundry furnaces)

Titanium dioxide chloride process oxidation

reactors

Methane reforming furnaces

Pulping liquor recovery furnaces

73.486

---

—13—

Combustion devices used in the recovery of sulfur

values from spent sulfuric acid

Any other

such device as the Agency determines

to

be an “Industrial Furnace” on the basis of one or

more of

the following factors:

The design and use of the device primarily to

accomplish recovery of material products;

The use of the device to burn or

reduce raw

materials to make a material product;

The use of the device to burn or reduce

secondary materials as effective substitutes

for raw materials,

in processes using raw

materials as principal feedstocks;

The use of the device to burn or reduce

secondary materials as ingredients

in an

industrial process to make

a material product;

The use of the device

in common industrial

practice

to produce

a material product; and

Other

relevant factors.

“Individual generation site” means the contiguous site

at or on which one or more hazardous wastes are

generated.

An individual generation site, such as

a

large manufacturing plant, may have one or more sources

of hazardous waste but is considered

a single or

individual generation site if the site or property is

contiguous.

“In operation”

refers to

a facility which is treating,

storing or disposing of hazardous waste.

“Injection well” means

a well into which fluids are

being injected.

(See also “underground injection”.)

“Inner liner” means

a continuous layer of material

placed inside a tank or container which protects the

construction materials of the tank or container from the

contained waste or

reagents used

to treat the waste.

“International shipment” means the transportation of

hazardous waste into or out of the jurisdiction of the

United States.

“Land treatment facility” means

a facility or part of a

facility at which hazardous waste is applied onto or

incorporated into the soil surface; such facilities are

disposal facilities if the waste will remain after

73.487

---

—14---

closure.

“Landfill” means

a disposal facility or part of a

facility where hazardous waste is placed

in or on land

and which

is not

a land treatment facility, a surface

impoundment or

an injection well.

“Landfill cell” means a discrete volume of a hazardous

waste landfill which uses a liner

to provide isolation

of wastes

from adjacent cells or wastes.

Examples of

landfill cells are trenches and pits.

“Leachate” means any liquid, including any suspended

components

in the liquid,

that has percolated through or

drained

from hazardous waste.

“Liner” means means a continuous layer of natural or

manmade materials beneath or on the sides of a surface

impoundment,

landfill or landfill cell, which restricts

the downward or lateral escape of hazardous waste,

hazardous waste constituents or leachate.

“Management”

or “hazardous waste management” means the

systematic control of the collection, source separation,

storage, transportation, processing, treatment, recovery

and disposal of hazardous waste.

“Manifest” means

the shipping document originated and

signed by the generator which contains the information

require~dby 35 Ill. Mm. Code 722.Subpart

B.

“Manifest document number” means the USEPA twelve digit

identification number assigned

to the generator plus a

unique five digit document number assigned to the

manifest by the generator for recording and reporting

purposes.

“Mining overburden returned

to the mine site” means any

material overlying an economic mineral deposit which is

removed to gain access to that deposit and

is then used

for reclamation of a surface mine.

“Movement” means that hazardous waste transported to a

facility in an individual vehicle.

“New hazardous waste management facility” or “new

facility” means a facility which began operation,

or

for

which construction commenced,

after November 19,

1980.

(See also “Existing hazardous waste management

facility”.)

“On—site” means the same or geographically contiguous

property which may be divided by public or

private

right—of—way, provided the entrance and exit between the

73.488

---

—15—

properties

is at

a crossroads intersection and access

is

by crossing as opposed to going along the right—of—

way.

Noncontiguous properties owned by the same person

but connected by

a right—of—way which he controls and to

which the public does not have access

is also considered

on—site property.

“Open burning” means

the combustion of any material

without the following characteristics:

Control of combustion air

to maintain adequate

temperature

for efficient combustion;

Containment of the combustion reaction in an

enclosed device

to provide sufficient residence

time and mixing for complete combustion; and

Control of emission of the gaseous combustion

products.

(See also “incineration” and “thermal treatment”.)

“Operator” means the person responsible

for the overall

operation of

a facility.

“Owner” means the person who owns

a facility or part of

a facility.

“Partial closure” means the closure of

a discrete part

of

a facility in accordance with the applicable closure

requirements of

35 Ill. Mm. Code 724 or

725.

For

example, partial closure may include the closure of a

trench,

a unit operation,

a landfill cell or

a pit,

while other parts of the same facility continue in

operation or will be placed

in operation in the future.

“Person” means means an individual,

trust, firm,

joint

stock company, federal agency, corporation

(including

a

government corporation), partnership, association,

state, municipality, commission, political subdivision

of

a state or any interstate body.

“Personnel”

or “facility personnel” means all persons

who work at or oversee the operations

of a hazardous

waste facility and whose actions or failure

to act may

result

in noncompliance with the requirements of 35

Ill.

Adm. Code 724

or

725.

“Pile” means any noncontainerized accumulation of solid,

non—flowing hazardous waste that is used for treatment

or storage.

“Point source” means any discernible, confined and

discrete conveyance

including, but not limited to, any

73-489

---

—16—

pipe,

ditch, channel, tunnel, conduit, well, discrete

fissure, container, rolling stock, concentrated animal

feeding operation or vessel or other floating craft from

which pollutants are or may be discharged.

This term

does not include return flows from irrigated

agriculture.

“Publicly owned treatment works” or “POTW” means any

device or system used

in the treatment (including

recycling and reclamation) of municipal sewage or

industrial wastes of

a liquid nature which

is owned by a

“state”

or “municipality”

(as defined by Section 502(4)

of the Clean Water Act

(33 U.S.C. 1362(4)).

This

definition includes sewers, pipes or other conveyances

only if they convey wastewater

to a POTW providing

treatment.

“Regional Administrator” means the Regional

Administrator

for the EPA Region in which the facility

is located or his designee.

“Representative sample” means a sample of

a universe or

whole

(e.g., waste pile,

lagoon,

groundwater) which can

be expected to exhibit the average properties of the

universe or whole.

“Runoff” means any rainwater,

leachate or other liquid

that drains over land from any part of a facility.

“Runon” means any rainwater,

leachate or other li~uid

that drains over land onto any part of a facility.

“Saturated

zone”

or “zone

of saturation” means that part

of the earth’s crust

in which all voids are filled with

water.

“SIC Code” means Standard Industrial Code

as defined in

Standard Industrial Classification Manual, incorporated

by reference in Section 720.111.

“Sludge” means any solid,

semi—solid or liquid waste

generated from

a municipal, commercial or industrial

wastewater treatment plant, water supply treatment plant

or air pollution control facility exclusive of the

treated effluent from a wastewater treatment plant.

“Small Quantity Generator” means a generator which

generates less than 1000

kg

of hazardous waste

in

a

calendar month.

“Solid waste” means

a solid waste as defined

in

35 Ill.

Mm.

Code 721.102.

“State” means any of the several states, the District of

73-490

---

—17—

Columbia,

the Commonwealth of Puerto Rico,

the Virgin

Islands, Guam,

American Samoa and the Commonwealth of

the Northern Mariana Islands.

“Storage” means the holding of hazardous waste for

a

temporary period, at the end of which the hazardous

waste is treated, disposed of or stored elsewhere.

“Surface impoundment” or “impoundment” means a facility

or part of

a facility which

is a natural topographic

depression, manmade excavation or diked area formed

primarily of earthen materials (although

it may be lined

with manmade materials)

which is designed to hold an

accumulation of liquid wastes or wastes containing free

liquids and which

is not an injection well.

Examples of

surface impoundments are holding, storage,

settling and

aeration pits, ponds and lagoons.

“Tank” means

a stationary device, designed to contain an

accumulation of hazardous waste which

is constructed

primarily of nonearthen materials (e.g., wood, concrete,

steel, plastic) which provide structural support.

“Thermal treatment” means the treatment of hazardous

waste

in

a device which uses elevated temperatures as

the primary means

to change the chemical, physical or

biological character or composition of the hazardous

waste.

Examples of thermal treatment processes are

incineration, molten salt, pyrolysis, calcination, wet

air oxidation and microwave discharge.

(See also

“incinerator” and “open burning”.)

“Totally enclosed treatment facility” means

a facility

for the treatment of hazardous waste which

is directly

connected to an industrial production process and which

is constructed and operated

in a manner which prevents

the release of any hazardous waste or any constituent

thereof into the environment during treatment.

An

example

is

a pipe in which waste acid is neutralized.

“Transfer facility” means any transportation related

facility including loading docks, parking areas, storage

areas and other

similar areas where shipments of

hazardous waste are held during the normal course of

transportation.

“Transport vehicle” means

a motor vehicle or rail car

used

for the transportation of cargo by any mode.

Each

cargo—carrying body (trailer, railroad freight car,

etc.)

is a separate transport vehicle.

“Transportation” means the movement of hazardous waste

by air, rail, highway or water.

73.491

---

—18—

“Transporter” means a person engaged

in the off—site

transportation of hazardous waste by air, rail, highway

or water.

“Treatment” means any method,

technique or process,

including neutralization, designed to change the

physical, chemical or biological character or

composition of any hazardous waste

so as to neutralize

such waste, or so as

to recover energy or material

resources from the waste or

so as to render such waste

non—hazardous or less hazardous;

safer

to transport,

store or dispose of;

or amenable for recovery, amenable

for storage or reduced in volume.

“Treatment zone” means a soil area of the unsaturated

zone of a land treatment unit within which hazardous

constituents are degraded, transformed or immobilized.

“Underground injection” means the subsurface emplacement

of fluids through

a bored, drilled or driven well;

or

through a dug well, where the depth of the dug well

is

greater than the largest surface dimension.

(See also

“injection well”.)

“Uppermost aquifer” means the geologic formation nearest

the natural ground surface that is an aquifer, as well

as lower aquifers that are hydraulically interconnected

with this aquifer within the facility’s property

boundary.

“Unsaturated

zone”

or

“zone

of

aeration”

means

the

zone

between

the

land

surface

and

the

water

table.

“United States” means the 50 States, the District of

Columbia, the Commonwealth of Puerto Rico,

the U.S.

Virgin Islands, Guam, American Samoa and the

Commonwealth of the Northern Mariana Islands.

“Vessel” includes every description of watercraft, used

or capable of being used as

a means of transportation on

the water.

“Wastewater

treatment unit” means a device which:

Is part of

a wastewater treatment facility which is

subject to regulation under either Section 402

or

Section 307(b)

of the Clean Water Act (33 U.S.C.

1342 or 1317(b));

and receives and treats or stores

an

irifluent wastewater which

is

a hazardous waste

as defined

in 35 Ill.

Adm. Code 721.103

or

generates and accumulates a wastewater treatment

sludge which

is

a hazardous waste

as defined

in 35

Ill. Adm. Code 721.103

or treats or

stores

a

wastewater treatment sludge which

is

a hazardous

73.492

---

—19—

waste as defined

in 35 Ill. Adm. Code 721.103;

and

Meets the definition of tank in 35

Ill. Adm. Code

720.110.

“Water (bulk shipment)” means the bulk transportation of

hazardous waste which is loaded or carried on board a

vessel without containers or labels.

“Well” means any shaft or pit dug or bored into the

earth, generally of

a cylindrical

form, and often walled

with bricks or tubing to prevent the earth from caving

in.

“Well

injection” (See “underground injection”).

(Source:

Amended

at 10

111 Reg.

effective

73-493

---

—20—

TITLE

35:

ENVIRONMENTAL PROTECTION

SUBTITLE

G:

WASTE

DISPOSAL

CHAPTER

I:

POLLUTION CONTROL BOARD

SUBCHAPTER

C:

HAZARDOUS WASTE OPERATING

REQUIREMENTS

PART

721

IDENTIFICATION AND LISTING OF HAZARDOUS WASTE

SUBPART A:

GENERAL PROVISIONS

Purpose of Scope

Definition of Solid Waste

Definition of Hazardous Waste

Exclusions

Special Requirements For Hazardous Waste Generated

by Small Quantity Generators

Requirements

for Recyclable Materials

Residues of Hazardous Waste

In Empty Containers

SUPBART B:

CRITERIA FOR IDENTIFYING THE CHARACTERISTICS

OF HAZARDOUS WASTE AND FOR LISTING HAZARDOUS WA~STES

Section

721.110

Criteria

for

Identifying the Characteristics of

Hazardous Waste

721.111

Criteria for Listing Hazardous Waste

Section

SUBPART C:

CHARACTERISTICS OF HAZARDOUS WASTE

721.120

721

.

121

721.122

721.123

721.124

Section

721 .130

721.131

721.132

721.133

General

Characteristics of Ignitability

Characteristics of Corrosivity

Characteristics of Reactivity

Characteristics

of EP Toxicity

SUBPART

D:

LISTS OF HAZARDOUS WASTE

General

Hazardous Wastes From Nonspecific Sources

Hazardous Waste From Specific Sources

Discarded Commercial Chemical Products, Off—

Specification Species, Container Residues and Spill

Residues Thereof

Appendix

A

Appendix

B

Appendix

C

Table

A

Representative Sampling Methods

EP Toxicity Test Procedures

Chemical Analysis Test Methods

Analytical Characteristics of Organic Chemicals

(Repealed)

Section

721

.

101

721.102

721

.

103

721.104

721

.

105

721

.

106

721.107

73.494

---

—21—

Table

B

Analytical Characteristics of Inorganic Species

(Repealed)

Table C

Sample Preparation/Sample Introduction Techniques

(Repealed)

Appendix

G

Basis

for

Listing

Hazardous

Wastes

Appendix

H

Hazardous Constituents

Appendix

I

Wastes

Excluded

under

Section

720.120

and

720.122

Table A

Wastes Excluded from Non—Specific Sources

Table B

Wastes Excluded from Specific Sources

Table C

Wastes

Excluded

from

Commercial

Chemical

Products,

Off—Specification

Species,

Container

Residues,

and

Soil Residues Thereof

Appendix 3

Method of Analysis for Chlorinated Dibenzo—p—

Dioxins and Dibenzofurans

Appendix

3

Table to Section 721.102

AUTHORITY:

Implementing

Section

22.4

and authorized by Section

27 of

the Environmental Protection Act

(Ill. Rev. Stat.

1985,

ch.

111 1/2,

pars.

1022.4 and 1027).

SOURCE:

Adopted

in R81—22,

43 PCB 427, at

5 Ill. Reg.

9781,

effective as noted in 35

Ill. Adm.

Code 700.106; amended and

codified

in R81—22,

45 PCB 317, at

6

Ill. Reg.

4828, effective as

noted

in 35

Ill. Mm.

Code 700.106; amended

in R82—l8, 51 PCB 31,

at

7 Ill. Reg.

2518, effective

February 22,

1983;

amended in R82—

19,

53 PCB 131, at

7

Ill. Reg.

13999,

effective

October

12,

1983;

amended

in R84—34,

61 PCB 247,

at 8

Ill.

Reg. 24562, effective

December

11, 1984; amended

in R84—9, at

9

Ill. Reg.

11834,

effective July 24,

1985;

amended

in R85—22 at 10 Ill. Reg. 998,

effective January

2,

1986; amended in R85—2 at 10 Ill. Reg.

8112,

effective May 2,

1986; amended

in R86—l at 10 Ill. Reg.

14002,

effective August 12,

1986;

amended

in R86—l9 at 10 Ill.

Reg.

,

effective

SUBPART A:

GENERAL PROVISIONS

Section 721.101

Purpose and Scope

a)

This Part identifies those

solid wastes which are

subject

to regulation as hazardous wastes under

35

Ill.

Adm. Code 702,

703, 705 and 722 through 725 and which

are subject

to the notification requirements of Section

3010 of the Resource Conservation and Recovery Act

(42

U.S.C.

6901 et seq.).

In this Part:

1)

Subpart A defines the terms “solid waste” and

“hazardous

waste,”

identifies

those

wastes which

are excluded from regulation under

35

Ill.

Adm.

Code

702,

703,

705

and

722

through

~5

726

and

establishes

special

management

requirements

for

hazardous

waste

produced

by

conditionally exemp~

small

quantity

generators

and hazardous waste which

is

~e~-1

-~eused7 recycled

e~ ree~4med.

73-495

---

—22—

2)

Subpart B sets forth the criteria used

to identify

characteristics of hazardous waste and to list

particular hazardous wastes.

3)

Subpart C

identifies characteristics of hazardous

wastes.

4)

Subpart

D

lists

particular

hazardous

wastes.

b)

1)

The definition of solid waste contained in this

Part

applies

only

to

wastes

that

also

are

hazardous

for purposes of the regulations implementing

Subtitle C of the Resource Conservation and

Recovery Act.

For example, it does not apply to

materials (such as non—hazardous scrap, paper,

textiles,

or rubber) that are not otherwise

hazardous wastes and that are recycled.

2)

This Part identifies only some of the materials

which are solid wastes and hazardous wastes under

Sections 1004(5), 1004(27)

and 7003 of RCRA.

A

material which

is not defined as a solid waste in

this Part,

or

is not a hazardous waste identified

or listed

in this Part

is still

a hazardous waste

for purposes of those Sections if,

in the case of

Section 7003 of RCRA,

the statutory elements are

established.

c)

For the purposes of Sections 721.102 and 721.106:

1)

A “spent material”

is any material that has been

used and as

a result of contamination can no longer

serve the purpose for which it was produced without

processing;

2)

“Sludge” has the same meaning used

in 35

Ill. Adm.

Code 720.110;

3)

A “by—product”

is

a material that

is not one of the

primary products of a production process and

is not

solely or separately produced by the production

process.

Examples are process residues such as

slags or distillation column bottoms.

The term

does not include a co—product that is produced

for

the general public’s use and

is ordinarily used

in

the form it

is produced by the process.

4)

A material

is “reclaimed”

if it

is processed

to

recover

a usable product, or

if it is

regenerated.

Examples are recovery of lead values

from spent batteries and regeneration of spent

solvents.

5)

A material

is

“used or reused”

if

it

is either:

73.496

---

—23—

A)

Employed

as an ingredient

(including use as an

intermediate)

in an industrial process to make

a product (for example, distillation bottoms

from one process used as feedstock in another

process).

However,

a material will not

satisfy this condition if distinct components

of the material are recovered as separate end

products

(as when metals are recovered from

metal—containing secondary materials);

or

B)

Employed

in a particular function or

application as an effective substitute

for

a

commercial product (for example, spent pickle

liquor used as phosphorus precipitant and

sludge conditioner

in wastewater treatment).

6)

“Scrap metal”

is bits and pieces of metal parts

(e.g., bars, turnings, rods, sheets,

wire) or metal

pieces that may be combined together with bolts or

soldering (e.g.,

radiators, scrap automobiles,

railroad box cars) which when worn or superfluous

can be recycled.

7)

A material

is “recycled”

if it

is

used, reused or

reclaimed.

8)

A material

is

“accumulated speculatively” if it is

accumulated before being recycled.

A material is

not accumulated speculatively, however, if the

person accumulating

it can show that the material

is potentially recyclable and has a feasible means

of being recycled;

and that

——

during the calendar

year (commencing on January

1)

——

the amount of

material that is recycled,

or transferred

to a

different site

for recycling,

equals at least 75

percent by weight or volume

of the amount of that

material accumulated

at the beginning of the

period.

In calculating the percentage of turnover,

the 75 percent requirement is to be applied

to each

material

of the same type (e.g.,

slags from a

single smelting process)

that is recycled

in the

same way (i.e.,

from which the same material

is

recovered or that is used

in the same way).

Materials accumulating

in units that would be

exempt from regulation under Section 721.104(c)

are

not

to be included in making the calculation.

(Materials that are already defined as

solid wastes

also are not to be included in making the

calculation).

Materials are no longer

in this

category once they are removed from accumulation

for recycling, however.

d)

The Agency has inspection authority pursuant to Section

3007 of the Resource Conservation and Recovery Act and

73.497

---

—24—

Section

4 of the Environmental Protection Act.

(Source:

Amended at

10

Ill Reg.

effective

)

Section 721.105

Special

Requirements for Hazardous Waste

Generated by Small Quantity Generators

a)

A generator

is a conditionally exempt small quantity

generator

in a calendar month if

it generates ~ess ~thert

~O89no more than 100 kilograms of hazardous waste

in

that month.

35

Ill. Adm. Code 700 explains the relation

of

this to

the 100 kg/mo exception of 35

Ill..

Adm. Code

809.

b)

Except

for those wastes identified

in subsections

(e),

(f),(g)7 +h+

ertd +k+ and

(j),

a

conditionally

exempt

small quantity generator’s hazardous wastes are not

subject

to regulation under

35 Ill. Adm. Code 702, 703,

705 and 722 through 726, and the notification

requirements of

Section 3010

of the Resource

Conservation and Recovery Act, provided the generator

complies with the requirements of subsections

(f),

(g)7

end ~(-3~-

and

(j).

c)

Hazardous waste that is reeye~edend ~the~4~e~e-luded

-frcm -~egt~et4ei’t~y See~4en~

end

~

35 ~

Ad~ eede

6-~36notsubject

to

regulation or that

is subject only to 35 Ill. Adm Code

722.111, 722.112,

722.140(c)

and 722.141 is not included

in the quantity determinations of this See~4on~Partand

35 Ill. Adm.

Code 722 through 726 and

is not subject to

any requirements of th4s 6ee~4enthoseParts.

Hazardous

waste that is subject to the requirements

of Section

721.106(b)

and

(c)

and

35

Ill. Adm. Code 726.Subparts C,

D7 and

F

is included in

the quantity determinations of

this See~4enPartand

is subject to the requirements of

~th4s

See~ienthisPart and 35

Ill. Adm. Code 722 through

726.

d)

In determining

the quantity of hazardous waste

it

generates,

a

generator

need

not

include:

1)

~

4’iflazardous

waste

when

it

is

removed

from

on—

site

storage;

or

2)

Hazardous

waste

produced

by on—site treatment

~including

reclamation)

of its hazardous waste

so

long as the hazardous waste that is treated was

counted once;

or,

3)

$pent materials that are generated,

reclaimed and

subsequently reused

on—site, so

long as such spent

73.498

---

—25—

materials have been counted once.

e)

If

a en~e~quen

~y generator generates acutely

hazardous waste in a calendar month in quantities

greater than set forth below, all quantities of that

acutely hazardous waste are subject to full regulation

under

35

Ill. Adm.

Code 702,

703,

705 and 722 through

~5726,

and the notification requirements of Section

3010 of the Resource Conservation and Recovery Act:

1)

A total of one kilogram of acute hazardous wastes

listed

in Sections 721.131, 721.1327 or 721.133(e);

or

2)

A total of 100 kilograms of any residue or

contaminated soil, waste or other debris resulting

from the clean—up of a spill,

into or on any land

or water, of any acute hazardous wastes listed

in

Sections 721.131, 721.1327 or 721.133(e).

f)

In order

for acute hazardous wastes generated by a smeH

quan~4~ygenerator of acutely hazardous wastes

in

quantities equal

to or less than those set forth

in

subsection

(e)(l)

or

(e)(2)

to be excluded from full

regulation under this Section, the generator must comply

with the following requirements:

1)

35 Ill. Adm. Code 722.111.

2)

The ~meH

quen~4~ygenerator may accumulate

acute-3y

hazardous waste on—site.

If it

accumulates

at

any

time acutely hazardous wastes in quantities greater

than set forth in subsections

(e)(1)

or

(e)(2), all

of those accumulated wastes

fe-r wh4eh ~the

-aeeuinu-le~4on

~

wes ei’eeeded are subject to

regulation under

35

Ill. Adm. Code 702,

703.,

705

and 722 through ~5726,

and the applicable

notification requirements of Section 3010 of the

Resource Conservation and Recovery Act.

The time

period of 35 Ill. Adm. Code 722.134(d)

for

accumulation of wastes on—site begins when the

accumulated wastes exceed the applicable exclusion

limit.

3)

A conditionally exempt small quantity generator may

either

treat or dispose of its acute hazardous

waste

in an on—site facility,

or

ensure delivery to

an off—site storage,

treatment or disposal

facility, either of which

is:

A)

Permitted under 35 Ill. Adm. Code 703;

B)

In interim status under

35 Ill.

Adm. Code 703

and 725;

73-499

---

—26—

C)

Authorized

to manage hazardous waste

by a

State with a hazardous waste management

program approved by USEPA;

D)

Permitted,

licensed or registered by

a State

to manage municipal or industrial solid waste;

or

E)

A facility which:

i)

Beneficially uses or reuses or

legitimately recycles or reclaims its

waste;

or

ii)

Treats its waste prior

to beneficial use

or reuse, or legitimate recycling or

reclamation.

g)

In order for hazardous waste generated by a

conditionally exempt small quantity generator

in

quantities of less than 100 kilograms of hazardous waste

during

a

calendar

month

to

be

excluded

from

full

regulation

under

this

Section,

the

generator

must

comply

with

the

following

requirements:

1)

35

Ill.

Adm.

Code

722.111;

2)

The

conditionally

exempt

small quantity generator

may

accumulate

hazardous

waste

on—site.

If

it

ac~cumu1ates at

any

time

more

than

a

total

of

1000

kilograms

of

~th4sthegenerator’s hazardous waste,

all

of

those

accumulated

wastes

fe-r

whteh

~the

eeeumuie~en

l4m4~ we~e~teeeded are

subject

to

regulation

under

the

special

provisions

of

35

Ill.

Adm.

Code

722

applicable

to

generators

of

between

100

kg

and

1000

kg

of hazardous waste

in

a calendar

month as well

as the requirements of 35 Ill. Adm.

Code 702,

703,

705 and ~

~1~eugh ~5723

through

726,

and

the

applicable

notification

requirements

of

Section

3010

of

the

Resource

Conservation and

Recovery

Act.

The

time

period

of

35

Ill.

Adm.

Code

722.134(d)

for

accumulation

of

wastes

on—site

begins

for

a

small

quantity

generator

when

the

accumulated

wastes

exceed

1000

kilograms;

3)

A

conditionally

exempt

small

quantity

generator

may

either

treat

or

dispose

of

its

hazardous waste

in

an

on—site

facility,

or

ensure

delivery

to

an

off—

site storage, treatment or disposal facility,

either of which is:

A)

Permitted under

35

Ill. Adm. Code 702 and 703;

B)

In interim status under 35 Ill. Adm. Code 703

73.500

---

—27—

and 725;

C)

Authorized to manage hazardous waste by a

State with

a hazardous waste management

program approved under 40 CFR 271

(1985);

D)

Permitted,

licensed or registered by a State

to manage

municipal or

industrial solid

waste;

or

E)

A facility which:

i)

Beneficially uses or re—uses,

or

legitimately recycles or reclaims the

small quantity generator’s waste; or

ii)

Treats

its waste prior

to beneficial use

or re—use,

or legitimate recycling or

reclamation.

h~)-

In order for he2erd~euswaste generated by a

~uentity genereor 4n a guentty greeter then

100

~4~legremsbt~tless

then

1000

k

ogrems durng a eelender

month

‘to

be

e~e1ud’edfrom f~l1regule’ten under +.h4s

See’tton7

the

gene-retor

mtist

eomply

wtth the

fo-l~lew4ng

requremens~

1+

35~lH~

Adm--

eede

~7111t

A sme’l quantty

generete-r may aeeumulete hesardous

waste

en—s-ite-~

If

it

eeeumuletes

at

any

t-ime

more

then a total

of 1000 klograms of

ts

ha2ardeus

waste7

a-Il

these

aeeumu&eted

wastes

for

wheh

the

eeeumu at-ion

-imt was exeeeded

are

sub-~eet to

regtilet-ien under

35 ~

Adm~eode 7G~r~03~ ~G&

end ~

through

~5T

and

the

app~eebe

netf-ieat-ien

equrements of Seetien 3010

o-f the

Resouree

?onservation

end

Reeo~v’eryAet~

The

t4me

period

of

35

I1~

Adnt~ eode

~22-~l34

for

eeeumu3etion

of

heserdetts

waste

en—site

begins

for

a

smeH

quantity

generator

when

the

accumulated

wastes

e~eeed

1000-

kHegrems~

3+

Begnn4ng

August

57

l9&5~for

any

hasardous

waste

shipped off-site7 the

generator

must

ensure

that

such

waste

-is

accompanied

by

a

copy

of

-the

manifest

-(-35

fl~1-~

AdM7

eode

~2-7l~03

signed

by

h4~nend

eenta4n-ing

the

following

nformet4on--

A+

The

name

end

address

of the generater of

the

westei-

B+

The

United

States

Bepartment

of

Trenspertet4:on

deser-ipon of the waste7 ineudng

the proper

73.501

---

—28—

shipping name7 herard c-less and identif~icet-ion

number +UN/NA+-r

e+

The number and type of eontainersi-

B+

The quantity of waste being transportedt and

E+

The name end address of the feci-lity

designated to receive the waste-c

4+

A small quant-ity generator may e4ther treat or

dispose of

ts hazardous waste in en on—s4te

feclity-y or ensure delvery to an off—site

storage7 treatment or disposal fee-ilityT either of

which -isi~

A+

Perm~ittedunder 35 Ill~Adm~eade ~O-3~-

B-)-

In interim status under

35 I1l-

Adm-- eade ~0-3

end ~Si-

e+

Authorzed

to

manage

hazardous

waste by a

State with a hazardous waste management

program app-roved by USEPA-~

B-)-

Permitted7 Heensed or registered by a State

‘to manage mune-ipel

o.r

ndustr-i:el

sal-id

wastei-

or

B-)-

A fae~ilitywhehi-

i+

Benef~ie~iallyuses or reuses or

legitimately recycles or reclaims

-its

weste-~or

44+

Treats

-its waste prior to beneficial use

or reuse7 or legitimate recycling or

reelame’t4on~

ih)

Hazardous waste subject to the reduced requirements of

this Section may be mixed with non—hazardous waste and

remain subject to these reduced requirements even

though

the resultant mixture exceeds the quantity limitations

identified

in this Section, unless

the

mixture

meets

any

of the characteristics of hazardous wastes identified in

Subpart C.

~i)

If

a small quantity generator mixes

a solid waste with a

hazardous waste that exceeds

a quantity exclusion level

of this Section, the mixture

is subject to full

regulation.

~j.) If

a conditionally exempt small quantity generator’s

hazardous wastes are mixed with used oil, the mixture is

subject to

35 Ill. Adm. Code 726.Subpart E,

if

it

is

73-502

---

—29---

destined

to

be

burned

for

energy

recovery.

Any

material

produced from such a mixture by processing, blending or

other treatment is also so regulated if it

is destined

to be burned

for energy recovery.

(Source:

Amended at 10 Ill.

Reg.

effective

)

SUBPART

D:

LISTS OF HAZARDOUS WASTE

Section 721.131

Hazardous Wastes From Nonspecific Sources

The following solid wastes are listed hazardous wastes from non-

specific sources unless they are excluded under

35

Ill. Mm. Code

720.120 and 720.122 and listed

in Appendix

I.

Industry

and

EPA Hazardous

Hazardous Waste

Hazard Code

Waste

No.

FOOl

The following spent halogenated solvents

(T)

used

in degreasing:

tetrachloroethylene,

trichloroethylene, methylene chloride,

1,1,1—

trichloroethane, carbon tetrachloride and

chlorinated fluorocarbons; all spent solvent

mixtures/blends used

in degreasing containing,

before use,

a total of ten percent or more

(by

volume)

of one or more of the above halogenated

solvents or those solvents listed

in F002, F004

ch

F005; and still bottoms from the recovery of these

spent solvents and spent solvent mixtures.

F002

The following spent halogenated solvents:

(T)

tetrachloroethylene, methylene chloride,

trichloroethylene, l,l,l—trichloroethane,

chlorobenzene,

1,l,2—trichloro—l,2,2—

trifluoroethane, orthodichlorobenzene and ~

trichlorofluoromethane and

1 ,l,2—trichloroethane

all

spent solvent mixtures/blends containing,

before

use,

a

total

of

ten

percent

or more (by

volume)

of

one

or

more

of

the

above

halogenated

solvents or those solvents listed

in FOOl, F004 or

F005;

and still

bottoms from the recovery of these

spent solvents and spent solvent mixtures.

F003

The following spent non-halogenated solvents:

(I)

xylene,

acetone,

ethyl

acetate,

ethyl benzene,

ethyl ether, methyl isobutyl ketone, n—butyl

alcohol, cyclohexanone and methanol; all spent

solvent

mixtures/blends

containing,

before

use,

a

total of ten percent or more (by volume)

of one or

more of the above non—halogenated solvents or those

solvents

listed

in

FOOl,

F002,

F004

or

F005;

and

still

bottoms from the recovery of these spent

solvents and

spent solvent mixtures.

73-503

---

—30—

F004

The following spent non—halogenated solvents:

(T)

cresols and cresylic acid and nitrobenzene; all

spent solvent

mixtures/blends

containing, before

use, a total of ten percent or more

(by volume) of

one

or

more

of

the

above

non—halogenated

solvents

or those solvents listed in FOOl,

F002 or FOO5;

and

still bottoms

from the recovery of these

spent

solvents and spent solvent mixtures.

F005

The following spent non—halogenated solvents:

(I, T)

toluene, methyl

ethyl

ketone, carbon disulfide,

isobutano1~andpyridine, benzene,

2—ethoxyethanol

and 2—nitropropane all spent solvent

mixtures/blends, containing, before use,

a

total

of

ten percent or more

(by volume)

of one or more of

the above non—halogenated solvents or those

solvents listed

in FOOl, FOO2

or F004; and still

bottoms from the recovery of these spent solvents

and spent solvent mixtures.

F006

Wastewater treatment sludges from

(T)

electroplating operations except from the following

processes:

(1) sulfuric

acid anodizing

of

aluminum;

(2)

tin plating on carbon steel;

(3)

zinc plating (segregated basis)

on carbon steel;

(4)

aluminum or zinc—aluminum plating on carbon

steel;

(5)

cleaning/stripping associated with tin,

zinc and aluminum

plating on carbon steel; and

(6)

chemical etching and milling of

aluminum.

F019

Wastewater

treatment sludges from the chemical

(T)

conversion coating of aluminum.

F007

Spent cyanide plating bath solutions from

(R,

T)

electroplating operations.

F008

Plating bath residues from the bottom of

(R,

T)

plating baths from electroplating operations where

cyanides are used

in the process.

F009

Spent stripping and cleaning bath solutions

(R,

T)

from electroplating operations where cyanides are

used

in the process.

FOb

Quenching bath residues from oil baths

(R,

T)

from metal heat treating operations where cyanides

are used

in the process.

FOll

Spent cyanide solutions from salt bath

CR,

T)

pot cleaning from metal heat treating operations.

F0l2

Quenching wastewater

treatment sludges from

CT)

metal heat treating operations where cyanides are

used

in the process.

F020

Wastes

(except wastewater

and spent carbon

(H)

from hydrogen chloride purification)

from the

production or manufacturing use

(as a reactant,

chemical intermediate or component in a formulating

process)

of tn— or tetrachlorophenol, or of

intermediates used

to produce their pesticide

derivatives.

(This listing does not include wastes

from the production of hexachlorophene from highly

purified 2,4,5—trichlorophenol.)

73-504

---

—31—

FO21

Wastes (except wastewater and spent carbon

(H)

from hydrogen chloride purification)

from the

production or manufacturing use

(as a reactant,

chemical intermediate or component

in a formulating

process) of pentachiorophenol, or of intermediates

used to produce its derivatives.

F022

Wastes

(except

wastewater

and

spent

carbon

(H)

from hydrogen chloride purification) from

the

manufacturing use

(as

a reactant, chemical

intermediate or component

in a formulating process)

of tetra—, penta— or hexachlorobenzenes under

alkaline conditions.

F023

Wastes (except wastewater

and spent carbon

(H)

from hydrogen chloride purification) from the

production of materials on equipment previously

used for

the production

or manufacturing use

(as

a

reactant, chemical intermediate or component in

a

formulating process) of tn—

and

tetrachlorophenols.

(This listing does not include

wastes

from

equipment

used

only

for

the

production

or

use

of

hexachlorophene

from

highly

purified

2,4,5—

trichlorophenol.

F024

Wastes including but not limited

(T)

to, distillation residues, heavy ends,

tars,

and reactor cleanout wastes from the production of

chlorinated aliphatic hydrocarbons, having carbon

content from one to five, utilizing free radical

catalyzed processes.

(This listing does not

include light ends,

spent filters and filter

aids,

spent dessicants, wastewater, wastewater treatment

sludges,

spent catalysts and wastes listed

in

Section 721.132.)

F026

Wastes (except wastewater

and spent carbon

(H)

from

hydrogen

chloride

purification)

from

the

production

of

materials

on

equipment

previously

used for

the manufacturing use

(as

a reactant,

chemical

intermediate or component

in

a formulating

process)

of tetra—, penta— or hexachlorobenzene

under

alkaline

conditions.

F027

Discarded unused formulations containing

(H)

tn—, tetra—

or pentachlorophenol or discarded

unused formulations containing compounds derived

from

these

chlorophenols.

(This

listing

does

not

include formulations containing hexachlorophene

~ynthesized

from

prepurified

2,4,5—trichlorophenol

as the sole component).

F028

Residues resulting from the incineration

(T)

or thermal treatment of soil contaminated with

hazardous waste numbers F020, FO21,

F022, FO23,

F026 and FO27.

(Board Note:

The primary hazardous properties of these materials

have been indicated by the letters T

(Toxicity),

R (Reactivity),

I

(Ignitability),

and

C

(Corrosivity).

The letter

H

indicates

73.505

---

—32—

Acute Hazardous Waste.)

(Source:

Amended

at

10

Ill.

Reg.

effective

Section

721.132

Hazardous

Waste

from

Specific

Sources

The

following solid wastes are listed hazardous wastes from

specific

sources

unless

they

are

excluded

under

35

Ill.

Adm.

Code

720.120

and

720.122

and

listed

in

Appendix

I.

Industry

and

EPA

Hazardous

Hazardous

Waste

Hazard

Code

Waste No.

Wood

Preservation:

KOO1

Bottom sediment sludge from the treatment

(T)

of wastewaters from wood preserving processes that

use creosote and/or pentachlorophenol.

Inorganic Pigments:

1002

Wastewater treatment sludge from the

(T)

production of chrome yellow and orange pigments.

K003

Wastewater treatment sludge from the

(T)

production of molybdate orange pigments.

1004

Wastewater treatment sludge from the

(T)

production of zinc yellow pigments.

KOOS

Wastewater treatment sludge

from the

(T)

production of chrome green pigments.

1006

Wastewater treatment sludge from the

(T)

production of chrome oxide green pigments

(anhydrous and hydrated).

1007

Wastewater treatment sludge from the

(T)

production of iron blue pigments.

1008

Oven residue from the production of chrome

(T)

oxide green pigments.

Organic Chemicals:

K009

Distillation bottoms from the production of

CT)

acetaldehyde from ethylene.

1010

Distillation side cuts from the production of

CT)

acetaldehyde from ethylene.

1011

Bottom stream from the wastewater stripper

in

(R,T)

the production of acrylonitnile.

1013

Bottom stream from the acetrontnile column

(T)

in the production of acrylontrile.

1014

Bottoms

from the acetontnile purification

(T)

column in the production of acrylonitrile.

1015

Still bottoms from the distillation of benzyl

(T)

chloride.

1016

Heavy ends or distillation residues

from the

CT)

73.5~

---

—33—

production of carbon tetrachloride.

1017

Heavy ends (still bottoms) from the

(T)

purification column

in the production of

epichlorohydrin.

1018

Heavy ends from the fractionation column in

(T)

ethyl chloride production.

KO19

Heavy ends from the distillation of ethylene

(T)

dichlonide

in

ethylene dichloride production.

1020

Heavy

ends

from

the

distillation

of

vinyl

(T)

chloride

in

vinyl

chloride

monomer

production.

1021

Aqueous spent antimony catalyst waste from

(T)

fluoromethanes production.

1022

Distillation bottom tars

from the production

(T)

of phenol/acetone from cumene.

1023

Distillation light ends from the production

(T)

of phthalic anhydnide from naphthalene.

1024

Distillation bottoms from the production of

(T)

phthalic anhydnide

from naphthalene.

1093

Distillation

light

ends

from

the

production

(T)

of phthalic anhydride from ortho—xylene.

KO94

Distillation bottoms

from the production

(T)

of

phthalic

anhydride

from

ortho—xylene.

K025

Distillation

bottoms

from

the

production

(T)

of nitrobenzene by the nitration of benzene.

KO26

Stripping still

tails from the production of

(T)

methyl

ethyl

pynidines.

1027

Centrifuge and distillation residues from

(R,T)

toluene

diisocyanate

production.

1028

Spent catalyst from the hydrochiorinator

(T)

reactor

in the production of 1,l,l—trichloroethane.

1029

Waste from the product stream stripper

in

(T)

the production of l,1,l—tnichboroethane.

1095

Distillation bottoms from the production of

(T)

1,1,1—tnichloroethane.

1096

Heavy ends from the heavy ends column from

(T)

the production of l,l,1—trichloroethane.

KO3O

Column

bottoms

or

heavy

ends

from

the

(T)

combined production of tnichioroethylene and

perchioroethylene.

K083

Distillation

bottoms

from

aniline

production.

(T)

K103

Process residues from aniline extraction

(T)

from

the

production

of

aniline.

K1O4

Combined

wastewater

streams

generated

from

(T)

nitrobenzene/aniline

production.

K085

Distillation or fractionation column bottoms

from the production of chlorobenzenes.

1105

Separated aqueous stream from the reactor

(T)

product washing step

in the production of

chlorobenzenes.

Kill

Product wastewaters from the production of

(C,T)

dinitrotoluene via nitration of toluene.

1112

Reaction

by—product

water

from

the

drying

(T)

column in the production of toluenediamine via

hydrogenation of dinitrotoiuene.

73.507

---

—34—

1113

Condensed liquid light ends from the

CT)

purification

of

toluenediamine

in

the

production

of

toluenediamine

via

hydrogenation

of

dinitroluene.

1114

Vicinals from the purification of toluene—

(T)

diamine

in the production of toluenediamine via

hydrogenation of dinitrotolune.

K115

Heavy ends from the purification of

CT)

toluenediamine in the production of toluenediamine via

hydrogenation of dinitrotoluene.

1116

Organic condensate

from the solvent recovery

(T)

column

in the production of toluene diisocyanate via

phosgenation of toluenediamine.

K1l7

Wastewater from the reactor vent gas scrubber

(T)

in the production of ethylene dibromide via

bromination of ethene.

Kll8

Spent adsorbent solids from purification of

(T)

ethylene dibromide

in the production of ethylene

dibromide via bromination of ethene.

1136

Still bottoms

from the purification of

(T)

ethylene dibromide in the production of ethylene

dibromide via bromination of ethene.

Inorganic Chemicals:

K071

Brine purification muds from the mercury

CT)

cell process

in chlorine production, where

separately prepunified brine is not used.

1073

Chlorinated hydrocarbon waste from the

CT)

purification step of the diaphragm cell process

using graphite anodes

in chlorine production.

1106

Wastewater

treatment

sludge

from

the

mercury

(T)

cell process

in chlorine production.

Pesticides:

1031

By—product salts generated in the production

CT)

of MSMA and cacodylic acid.

1032

Wastewater

treatment

sludge

from

the

(T)

production of chiordane.

1033

Wastewater and scrub water from the

(T)

chlorination of cyclopentadiene

in the production

of chlordane.

1034

Filter solids from the filtration of

CT)

hexachlorocyclopentadiene

in the production of

chbordane.

K097

Vacuum stripper discharge from the chiordane

(T)

chlorinator

in the production of chlordane.

1035

Wastewater

treatment

sludges

generated

in

the

(T)

production of creosote.

1036

Still

bottoms

from

toluene

reclamation

CT)

distillation in the production of disulfoton.

1037

Wastewater treatment sludges from the

CT)

production of disulfoton.

1038

Wastewater from the washing and stripping of

(T)

73-508

---

—35—

phorate production.

1039

Filter cake from the filtration of

(T)

diethylphosphorodithioic

acid

in

the

production

of

phorate.

1040

Wastewater treatment sludge from the

(T)

production of phorate.

K04l

Wastewater

treatment sludge from the

CT)

production of toxaphene.

1098

Untreated process wastewater

from the

CT)

production of toxaphene.

KO42

Heavy ends or distillation residues from the

(T)

distillation

of

tetrachlorobenzene

in

the

production

of

2,4,5—T.

1043

2,6—Dichlorophenol

waste

from

the

production

(T)

of

2,4—D.

1099

Untreated wastewater

from the production

(T)

of 2,4—D.

Explosives:

KO44

Wastewater treatment sludges from the

CR)

manufacturing and

processing of explosives.

K045

Spent carbon from the treatment of wastewater

(R)

containing explosives.

1046

Wastewater

treatment sludges from the

CT)

manufacturing, formulation and loading of lead—

based initiating compounds.

K047

Pink/red water

from TNT operations.

(R)

Petroleum Refining:

1048

Dissolved air flotation

CDAF)

float from the

CT)

petroleum refining

industry.

1049

Slop oil emulsion solids from the petroleum

(T)

refining industry.

1050

Heat exchanger bundle cleaning sludge from

(T)

the petroleum

refining industry.

K051

API separator sludge from the petroleum

CT)

refining industry.

1052

Tank bottoms

(leaded) from the petroleum

(T)

refining industry.

Iron and Steel:

1061

Emission control dust/sludge from the primary

(T)

production of steel

in electric furnaces.

1062

Spent pickle liquor from steel finishing

(C,T)

operations.

Secondary Lead:

1069

Emission control dust/sludge from secondary

(T)

lead smelting.

K100

Waste leaching solution from acid leaching

(T)

73.509

---

—36--

of emission control dust/sludge from secondary lead

smelting.

Veterinary Pharmaceuticals:

1084

Wastewater treatment sludges generated

(T)

during

the

production

of

veterinary

pharmaceuticals

from

arsenic

or

organo—arsenic

compounds.

1101

Distillation

tar

residues

from

the distillation

CT)

of

aniline—based

compounds

in

the

production

of

veterinary

pharmaceuticals

from

arsenic

or

organoarsenic

compounds.

K1O2

Residue

from

use

of

activated

carbon

for

CT)

decolorization in the production of veterinary

pharmaceuticals from arsenic or organo—arsenic

compounds.

Ink Formulation:

1086

Solvent washes and sludges, casutic washes

(T)

and sludges, or water washes and sludges from

cleaning tubs and equipment used

in the formulation

of ink from pigments, driers,

soaps and stabilizers

containing chromium and lead.

Coking:

1060

Ammonia still lime sludge from cooking

CT)

operations.

1087

Decanter tank tar sludge from cooking

(T)

operations.

(Source:

Amended at 10 Ill. Reg.

,

effective

Section 721.133

Discarded Commercial Chemical Products, Off—

Specification Species, Container Residues and

Spill Residues Thereof.

The following materials or items are hazardous wastes if and when

they are discarded

or intended

to be discarded, when they are

mixed with waste oil or used oil or other material and applied to

the land for dust suppression or road treatment, or when,

in lieu

of their original

intended use, they are produced for use as

(or

as

a component of)

a fuel, distributed

for use

as

a fuel, or

burned as a fuel.

a)

Any commercial chemical product,

or manufacturing

chemical intermediate having the generic name listed in

subsections

Ce)

or

(f).

b)

Any off—specification commercial chemical product or

manufacturing chemical intermediate which,

if it met

73-510

---

—37—

specifications,

would have the generic name listed

in

subsections

Ce)

or

(f).

c)

Any

container

or

inner

liner removed

from

a container

that has been used

to hold any commercial chemical

product or manufacturing chemical intermediate having

the generic names listed in subsection

(e),

or any

container or inner liner removed from

a container that

has been used

to hold any off—specification chemical

product and manufacturing chemical intermediate whiôh,

if it met specifications,

would have the generic name

listed in subsection

Ce)

unless:

1)

The container or inner liner has been triple rinsed

using

a solvent capable of removing the commercial

chemical product or manufacturing chemical

intermediate;

2)

The container or

inner liner has been cleansed by

another method that has been shown in the

scientific literature,

or by tests conducted by the

generator,

to achieve equivalent removal;

or

3)

In the case of

a container, the inner liner

that

prevented contact of the commercial chemical

product or manufacturing chemical intermediate with

the container, has been removed.

d)

Any residue or contaminated soil, water or other debris

resulting from the cleanup of a spill,

into or on any

land or water

of any commercial chemical product or

manufacturing chemical intermediate having the generic

name listed

in subsection

Ce)

or

(f), or any residue or

contaminated soil, water or other debris resulting from

the cleanup of

a spill,

into or on any land or water, of

any off—specification chemical product or manufacturing

chemical

intermediate which,

if

it met specifications,

would have the generic name listed in subsection

Ce)

or

(f)

(Board Note:

The phrase “commercial chemical product or

manufacturing chemical intermediate having the generic

name listed

in

.

..“

refers to

a chemical substance which

is manufactured or formulated for commercial or

manufacturing use which consists of the commercially

pure grade of the chemical, any technical grades of the

chemical

that are produced or marketed, and all

formulations

in which the chemical

is the sole active

ingredient.

It does not refer

to a material, such as

a

manufacturing process waste, that contains any of the

substances

listed

in subsections

Ce)

or

(f).

Where a

manufacturing process waste

is deemed to be a hazardous

waste because

it contains a substance listed

in

subsections

(e)

or

(f), such waste will be listed

in

73.511

---

—38—

either Sections 721.131

or 721.132

or will be identified

as

a hazardous waste by the characteristics set forth in

Subpart.)

e)

The commercial chemical products, manufacturing chemical

intermediates or off—specification commercial chemical

products or manufacturing chemical intermediates

referred to in subsections

(a) through

Cd) of this

Section, are identified as acute hazardous waste

(H)

and

are subject to the small quantity exclusion defined in

Section 721.105(e).

+Board Notei~ For the

convenience

of the regulated community

‘the primary hazardous

properties of these materials have been indicated by the

letters P +To~ieity+7end R +Reaet4v4ty+~ Absence of a

letter -indeates that the compound only is l-isted for

acute

tox-ic4ty-~r+ These wastes and their corresponding

EPA Hazardous Waste Numbers are:

(Board Note:

For the convenience of the regulated

community the primary hazardous properties of these

materials have been indicated by the letters T

(Toxicity),

and

R (Reactivity).

Absence of

a letter

indicates that the compound only is listed for acute

toxicity.)

Hazardous

Waste No.

Substance

P023

Acetaldehyde, chioro—

P002

Acetamide, N—(aminothioxomethyl)—

P057

Acetamide,

2—fluoro—

P058

Acetic acid, fluoro—, sodium salt

P066

Acetimedic

acid,

N—(methylcarbamoyl)oxythio—

,

methyl ester

POOl

3~-(alpha—acetonylbenzyl)—4—hydroxycoumarin

and

salts, when present at concentrations .greater

than 0.3

P002

l—Acetyl—2—thiourea

P003

Acrolein

P070

Aldicarb

P004

Aldrin

P005

Allyl alcohol

P006

Aluminum

phosphide

P007

5—(Aminomethyl)—3—isoxazolol

P008

4—Aminopyridine

P009

Ammonium

picrate

CR)

P119

Ammonium vanadate

POlO

Arsenic acid

P012

Arsenic (III)

oxide

POll

Arsenic

(V)

oxide

POll

Arsenic pentoxide

P012

Arsenic trioxide

P038

Arsine, diethyl—

P054

Aziridine

73.512

---

—39—

P013

Barium cyanide

P024

Benzenamine, 4—chloro—

P077

Benzenamine, 4—nitro—

P028

Benzene,

(chloromethyl)—

P042

l,2—Benzenediol,

4—l—hydroxy—2—(methyl—

amino)ethyl)—

P014

Benzenethiol

P028

Benzyl chloride

P015

Beryllium dust

P016

BisCchloromethyl)

ether

P017

Bromoacetone

P018

Brucine

P021

Calcium cyanide

P123

Caniphene,

octachloro—

P103

Carbamidoselensoic acid

P022

Carbon bisulfide

P022

Carbon disulfide

P095

Carbonyl chloride

P033

Chlorine

cyanide

P023

Chloroacetaldehyde

P024

p—Chloroaniline

P026

1—(o—Chlorophenyl)thiourea

P027

3—Chloropropionitrile

P029

Copper

cyanides

P030

Cyanides

(soluble

cyanide

salts),

not

elsewhere specified

P031

Cyanogen

P033

Cyanogen

chloride

P036

Dichlorophenylarsine

P037

Dieldrin

P038

Diethylarsine

P039

O,O—Diethyl

S—2—(ethylthio)ethyl

phosphoro—

dithioate

P041

Diethyl—p—nitrophenyl phosphate

P040

0,0—Diethyl

O—pyrazinyl

phosphorothioate

P043

Diisopropyl fluorophosphate

P044

Dimethoate

P045

3,3—Dimethyl—l—(methylthio)--2—butanone, 0—

(methylamino)

carbonyl

oxime

P071

0,0-Dimethyl O—p—nitrophenyl phosphorothioate

P082

Dimethylnitrosamine

P046

alpha,

alpha—Dimethylphenethylamine

P047

4,6—Dinitro—o—cresol and salts

P034

4,6—Dinitro—o—cyclohexylphenol

P048

2,4—Dinitrophenol

P020

Dinoseb

P085

Diphosphoramide,

octamethyl—

P039

Disulfoton

P049

2,4—Dithiobiuret

P109

Dithiopyrophosphoric

acid,

tetraethyl

ester

P050

Endosulfan

P088

Endothall

P051

Endrin

P042

Epinephrine

73.513

---

—40—

P046

Ethanamine, l,l—dimethyl—2—phenyl—

P084

Ethenamine, N—methyl—N—nitroso—

P101

Ethyl cyanide

P054

Ethylenimine

P097

Famphur

2056

Fluorine

P057

Fluoroacetamide

P058

Fluoroacetic

acid,

sodium

salt

2065

Fulminic

acid,

mercury

(II)

salt

(R,T)

P059

Heptachlor

P051

l,2,3,4,10,lO—Hexachloro—6,7—epoxy—

1,4,4a,5,6,7,8,Ba—octahydro—endo,

endo—1,

4:5,

8—dimethanonaphthalene

P037

1,2,3,4,1O,1O—Hexachloro—6,7—epoxy—

1,4,

4a,5,6,7,8,

8a—octahydro—endo,

exo—l,

4:5,

8—dimethanonaphthalene

P060

1,2,3,4,lO,lO—Hexachloro—1,4,4a,5,8,Ba—

hexahydro—l ,4: 5, 8—endo, endo-

dimethanonaphthalene

P004

1,2,3,4,1O,1O,—Hexachloro—l,4,4a,5,8,Sa----

hexahydro—1,4:5,8—endo,

exo—

dimethanonaphthal

ene

P060

Hexachlorohexàhydro—exo ,exo—

dimethanonaphthalene

P062

Hexaethyl

tetraphosphate

2116

Hydrazinecarbothioamide

2068

Hydrazine,

methyl—

P063

Hydrocyanic

acid

2063

Hydrogen

cyanide

P096

Hydrogen

phosphide

P064

Isocyanic acid, methyl ester

P007

3(2H)—Isoxazolone,

5—(aminomethyl)—

P092

Mercury, phenyl—, acetate

P065

Mercury fulminate

(R,T)

P016

Methane,

oxybis(chloro—

2112

Methane,

tetranitro—

CR)

2118

Methanethiol, trichioro—

P059

4,7—Methano—1H—indene,l,4,5,6,7,8,8—

heptachloro—3a,4 ,7,7a—tetrahydro---

P066

Methomyl

2067

2—Methylaziridine

P068

Methyl

hydrazine

P064

Methyl

isocyanate

P069

2—Methyllactonitrile

2071

Methyl parathion

P072

alpha—Naphthylthiourea

2073

Nickel

carbonyl

P074

Nickel

cyanide

P074

Nickel

(II)

cyanide

P073

Nickel

tetracarbonyl

P075

Nicotine and salts

2076

Nitric

oxide

P077

p—Nitroaniline

P078

Nitrogen dioxide

73.514

---

—41—

P076

Nitrogen

(II)

oxide

P078

Nitrogen

(IV) oxide

2081

Nitroglycerine

(R)

P082

N—Nitrosodimethylainine

P084

N—Ni trosomethylvinylamine

P050

5—Norbornene—2,3—dimethanol,

1,4,5,6,7,7—

hexachloro,

cyclic

sulfite

P085

Octamethylpyrophosphoramide

P087

Osmium

oxide

2087

Osmium tetroxide

P088

7—Oxabicyclo2.2.lheptane—2,3—dicarboxylic

acid

P089

Parathion

P034

Phenol,

2—cyclohexyl—4,6—dinitro—

P048

Phenol,

2,4—dinitro—

P047

Phenol,

2,4,—dinitro—6—methyl—

P020

Phenol, 2,4—dinitro—6—(1—methylpropyl)—

P009

Phenol, 2,4,6—trinitro—, ammonium salt

CR)

P036

Phenyl

dichloroarsine

P092

Phenylmercuric

acetate

P093

N—Phenylthiourea

P094

Phorate

P095

Phosgene

P096

Phosphirie

P041

Phosphoric

acid, diethyl p—nitrophenyl ester

2044

Phosphorodithioic acid, O,O—dimethyl S—2—

(methylamino)—2—oxoethyl

ester

P043

Phosphorofluoric

acid,

bis(l—methylethyl)ester

P094

Phosphorothioic

acid, 0,0—diethyl

S—

(ethylthio)methyl ester

P089

Phosphorothioic acid, 0,0—diethyl O—(p—

nitrophenyl)

ester

P040

Phosphorothioic acid, O,O—diethyl 0—pyrazinyl

ester

2097

Phosphorothioic acid, O,O—dimethyl O—p-

((dimethylamino)—sulfonyl)phenylester

2110

Plumbane, tetraethyl—

P098

Potassium

cyanide

2099

Potassium silver cyanide

P070

Propanal,

2—methyl—2—(methylthio)—,

0—

(methylamino)

carbonyl)

oxime

P101

Propanenitrile

2027

Propanentrile, 3—chloro—

P069

Propanenitrile,

2—hydroxy—2—methyl---

P081

1,2,3—Propanetriol, trinitrate—

(R)

P017

2—Propanone,

1—bromo—

P102

Propargyl alcohol

P003

2—Propenal

P005

2—Propen—l—ol

P067

1,2—Propylenimine

P102

2—Propyn—1—ol

P008

4—Pyridiriamine

P075

Pyridine,

(S)—3—(l—methy—2—pyrrolidinyl)—, and

salts

73-515

---

—42—

Pill

Pyrophosphoric

acid, tetraethyl

ester

2103

Selenourea

P104

Silver cyanide

P105

Sodium

azide

2106

Sodium

cyanide

2107

Strontium sulfide

2108

Strychnidin—lO—one,

and

salts

P018

Strychnidin—lO—one,

2,3—dimethoxy—

P108

Strychnine

and

salts

P115

Sulfuric acid, thallium(I)

salt

P109

Tetraethyldithiopyrophosphate

P110

Tetraethyl

lead

P111

Tetraethylpyrophosphate

P112

Tetranitromethane

(R)

P062

Tetraphosphoric

acid,

hexaethyl

ester

P113

Thallic

oxide

P113

Thallium

(III)

oxide

P114

Thallium

(I)

selenite

P115

Thallium

(I)

sulfate

P045

Thiofanox

P049

Thioimidodicarbonic diamide

P014

Thiophenol

2116

Thiosemicarbazide

P026

Thiourea,

(2—chlorophenyl)—

P072

Thiourea, l—naphthalenyl—

P093

Thiourea,

phenyl—

P123

Toxaphene

P118

Trichloromethanethiol

2119

Vanadic

acid,

animonium

salt

P120

Vanadium pentoxide

P120

Vanadium(V)

oxide

POOl

Warfarin,

when

present

at

concentration

greater than 0.3.

2121

Zinc

cyanide

P122

Zinc

phosphide,when

present

at

concentrations

greater than 10

(R,T)

f)

The

commercial

chemical

products,

manufacturing

chemical

intermediates

or

off—specification

commercial

chemical

products

referred

to

in subsections

(a)

through

Cd),

are

identified

as

toxic

wastes

(T)

unless

otherwise

designated

and

are

subject

to

the

small

quantity

exclusion

defined

in

Section

721.105(a)

and

(f~).

fBoerd

Note--

For

the

conveMenee

of

the

-regulated

eommunttyy the primary hazardous propert4es

of these

mate-r-ials have been -irtd-ieeted by the

ette-rs P

+Tox-icty+7

R

+Reaet-ivtty+~

~

+~gn~itab4l-ity+ and

e

+Co-r-ros-ivty+~-

Absence

of

a

letter

nd4eates

that

the

compound 4s only l~istedfor to~c-4’ty-~+These wastes and

their corresponding

EPA Hazardous Waste Numbers are:

(Board Note:

For the convenience of the regulated

community,

the primary hazardous properties of these

materials have been indicated by the letters T

73.516

---

—43—

(Toxicity),

R

(Reactivity),

I

(Ignitability)

and

C

(Corrosivity).

Absence of

a letter indicates that

the

compound

is only listed for toxicity.)

Hazardous

Waste No.

Substance

0001

Acetaldehyde

(I)

U034

Acetaldehyde, trichloro—

0187

Acetamide, N—(4—ethoxyphenyl)—

U005

Acetamide, N—9H—fluoren—2—yl—

0112

Acetic acid, ethyl ester

(I)

Ul44

Acetic acid, lead salt

0214

Acetic acid, thallium(I)

salt

0002

Acetone

(I)

U003

Acetonitrile

(I,T)

0248

3-(alpha—Acetonylbenzyl)—4—hydroxycoumarin

and salts, when present at concentrations of

0.3

or less

0004

Acetophenone

0005

2—Acetylaminofluorene

0006

Acetyl chloride

(C,R,T)

U007

Acrylamide

0008

Acrylic acid

(I)

U009

Acrylontrile

0150

Alanine, 3—p—bis(2—chloroethyl)amino

phenyl—, L—

U328

2—Amino—l-methylbenzene

U353

4—Aniino-l—methylbenzene

0011

Amitrole

0012

Aniline

(I,T)

0014

Auramine

U0l5

Azaserine

U010

Azirino(2’,3’:3,4)pyrrolo(l,2—a)indole—4,7—

dione,

6—amino—B—

((aminocarbonyl)oxy)rnethyl—1,la,2,8,8a,8b—

hexahydro—8a—methoxy—5—methyl—,

0157

Benzjaceanthrylene,

l,2—dihydro—3—methyl—

U016

Benz(c)acridine

U0l6

3,4—Benzacridine

0017

Benzal

chloride

U0l8

Benza

anthracene

U018

1,2—Benzanthracene

U094

l,2—Benzanthracene, 7,12—dimethyl—

0-012

Benzenamine

(I,T)

U0l4

Benzenamine, 4,4’—carbonimidoylbis(N,N—

dimethyl—

0049

Benzenamine, 4—chloro—2—methyl—

0093

Benzenamine, N,N’—dimethyl—4—phenylazo-

0158

Benzenamine, 4,4’—methylenebis(2—chloro—

U222

Benzenamine,

2—methyl—, hydrochloride

0181

Benzenamine, 2—methyl—5—nitro

U0l9

Benzene

CI,T)

U038

Benzeneacetic

acid,

4—chloro—alpha—C4—

73.517

---

—44—

chlorophenyl)—alpha—hydroxy, ethyl ester

0030

Benzene, 1—bromo—4—phenoxy—

0037

Benzene, chioro—

Ul90

l,2—Benzenedicarboxylic acid anhydride

0028

l,2—Benzenedicarboxylic

acid,

bis(2—ethyl—

hexyl)

ester

0069

1,2—Benzenedicarboxylic acid, dibutyl ester

0088

l,2—Benzenedicarboxyiic acid,

diethyl ester

U102

l,2—Benzenedicarboxyiic acid,

dimethyl ester

0107

l,2—Benzenedicarboxyiic acid,

di—n—octyl

ester

U070

Benzene, 1,2—dichioro—

U071

Benzene,

1,3—dichioro—

0072

Benzene, 1,4—dichioro—

0017

Benzene, (dichloromethyl)—

0223

Benzene,

l,3—diisocyanatomethyl--

(R,T)

U239

Benzene, dimethyl— (I,T)

0201

1,3—Benzenediol

0127

Benzene, hexachloro—

U056

Benzene, hexahydro—(I)

0188

Benzene, hydroxy-

U220

Benzene, methyl—

Ul05

Benzene, l—methyl—l—2,4--dinitro—

0106

Benzene, l—methyl—2,6—dinitro—

U203

Benzene, 1,2—methylenedioxy—4—allyl—

U14l

Benzene, 1,2—methylenedioxy—4—propenyl—

0090

Benzene, l,2—methylenedioxy—4—propyl-

0055

Benzene,

(1—methylethyl)—

(I)

0169

Benzene, nitro—

(I,T)

0183

Benzene, pentachioro—

0185

Benzene, pentachloronitro-

0020

Benzenesulfonic acid chloride

(C,R)

0020

Benzenesulfonyl chloride (C,R)

0207

Benzene, l,2,4,5—tetrachloro—

0023

Benzene, (trichloromethyl)—(C,R,T)

0234

Benzene,

l,3,5—trinitro—

CR,T)

U02l

Benzidine

0202

1,2—Benzisothiazolin—3—one, l,l—dixoide

0120

Benzoj,k

fluorene

0022

Benzoapyrene

U022

3,4—Benzopyrene

0197

3—Benzoquinone

0023

Benzotrichloride (C,R,T)

0050

1

,

2—Benzphenanthrene

0085

2,2’—Bioxirane

(I,T)

0021

(l,1’—Biphenyl)—4 ,4 ‘—diamine

0073

(1,l’—Biphenyl)—4,4’—diamine, 3,3’—dichloro—

0091

(1,1’—Biphenyl)—4,4 ‘—diamine,

3,3’—

dimethoxy—

0095

(l,1’—Biphenyl)—4,4’—diamine, 3,3’—dimethyl—

0024

Bis(2—chloroethoxy) methane

U027

Bis(2—chloroisopropyl)

ether

0244

Bis(dimethylthiocarbamoyl) disulfide

U028

Bis(2—ethylhexyl) phthalate

73-518

—45—

0246

Bromine cyanide

0225

Bromoform

0030

4—Bromophenyl

phenyl

ether

0128

l,3—Butadiene, 1,l,2,3,4,4—hexachloro—

U172

1—Butanamine, N—butyl—N—nitroso—

0035

Butanoic acid, 4—Bis(2—chloroethyl)amino

benzene—

0031

1—Butanol

(I)

U159

Butanone

(I,T)

0160

2—Butanone peroxide

(R,T)

0053

2—Butenal

0074

2—Butene, l,4—dichloro— (I,T)

0031

n—Butyl alcohol

(I)

0136

Cacodylic acid

U032

Calcium chroniate

0238

Carbamic acid, ethyl ester

0178

Carbamic acid,

methylnitroso—,

ethyl ester

0176

Carbamide, N—ethyl—N—nitroso—

13177

Carbamide, N—methyl—N—nitroso—

0219

Carbamide, thio—

0097

Carbamoyl chloride, dimethyl

0215

Carbonic acid, dithallium

(I)

salt

0156

Carbonochloridic acid, methyl ester

CI,T)

0033

Carbon oxyfluoride

(R,T)

0211

Carbon tetrachioride

0033

Carbonyl fluoride (R,T)

0034

Chioral

0035

Chlorambucil

0036

Chiordane,

technical

0026

Chlornaphazine

0037

Chlorobenzene

U039

4—Chloro—m—cresol

0041

l—chloro—2,3—epoxypropane

0042

2—Chloroethyl vinyl ether

U044

Chloroform

U046

Chloromethyl methyl ether

(3047

beta—Chloronapthalene

0048

o—Chlorophenol

U049

4—chloro—o—toluidine,

hydrochloride

U032

Chronic

acid,

calcium

salt

U050

Chrysene

U051

Creosote

0052

Cresols

0052

Cresylic acid

U053

Crotonaldehyde

0055

Cumeme

(I)

0246

Cyanogen bromide

Ul97

l,4—Cyclohexadienedione

0056

Cyclohexane

(I)

0057

Cyclohexanone

(I)

1.3130

l,3—Cyclopentadiene,

l,2,3,4,5,5—hexachloro—

U058

Cyclophosphamide

0240

2,4—D,

salts and esters

0059

Daunoinycin

73.519

---

—46—

0060

DDD

0061

DDT

0142

Decachlorooctahydro-l

,3,4—metheno—2H—

cyclobuta

c,

d

—pen talen—2—one

U062

Diallate

13133

Diamine

(R,T)

0221

Diaminotoluene

0063

Dibenza,hlanthracene

0063

1,2:5,6—Dibenzanthracene

0064

l,2:7,8—Dibenzopyrene

0064

Dibenz(a,ipyrene

0066

1, 2—Dibromo—3—chloropropane

0069

Dibutyl phthalate

13062

S—(2,3—Dichloroallyl)

diisopropyithiocarbamate

U070

o—Dichlorobenzene

13071

m—Dichlorobenzene

0072

p—Dichlorobenzene

0073

3,3’—Dichlorobenzidine

0074

l,4—Dichloro—2—buterie

(I,T)

U075

Dichlorodifluorornethane

(.3192

3, 5—Dichloro—N— (1 ,l—dimethyl—2—propynyl)

benzamide

0060

Dichlorodiphenyldichloroethane

U061

Dichlorodiphenyltr

ichloroethane

0078

1,1—Dichloroethylene

0079

1,2—Dichloroethylene

U025

Dichloroethyl ether

0081

2,4—Dichiorophenol

(3082

2,6—Dichiorophenol

0240

2,4—Dichlorophenoxyacetic acid,

salts and

esters

U083

l,2—Dichloropropane

0084

1,3—Dichloropropene

U085

l,2:3,4—Diepoxybutane

(I,T)

(3108

l,4—Diethylene dioxide

0086

N,N—Diethylhydrazine

U087

0 ,0—Diethyl—S—methyl—dithiophosphate

(3088

Diethyl

phthalate

0089

Diethyistilbestrol

11148

1, 2—Dihydro—3 ,6—pyradizinedione

U090

Dihydrosafrole

0091

3,3‘—Dimethoxybenzidine

U092

Dimethylamine

(I)

0093

Dimethylaminoazobenzene

0094

7, l2—Diniethylbenz a

anthracerie

0095

3,3

‘—Dimethylbenzidine

0096

alpha, alpha—Dimethylbenzylhydroperoxide

(R)

U097

Dimethylcarbanioyl chloride

0098

1,1—Dimethylhydrazine

U099

1,2—Dimethylhydrazine

ulol

2,4—Dimethylphenol

(3102

Dimethyl phthalate

0103

Dimethyl sulfate

73.520

---

—47—

U105

2,4—Dinitrotoluene

0106

2,6—Dinitrotoluene

(3107

Di—n—octyl phthalate

0108

1,4—Dioxane

0109

l,2—Diphenylhydrazine

0110

Dipropylamine

CI)

(3111

Di—N--propylnitrosoamine

(3001

Ethanal

CI)

Ul74

Ethanamine, N—ethyl—N--nitroso—

(3067

Ethane,

1,2—dibromo—

U076

Ethane, l,l—dichloro—

U077

Ethane,

l,2—dichloro—

(3114

l,2—Ethanediylbiscarbamodithioic acid

(3131

Ethane, l,l,1,2,2,2—hexachloro—

(3024

Ethane, 1,l’—methylenebis(oxy)bisC2—

chloro-

0247

Ethane, l,l,1—trichloro—2,2—bis(p—

methoxyphenol)—

0003

Ethaneriitrile (I,T)

0117

Ethane, l,1’—oxybis—

CI)

0025

Ethane, 1,l’—oxybis(2—chloro—

0184

Ethane, pentachloro—

(3208

Ethane,

l,l,l,2—tetrachloro—

3209

Ethane,

1,1,2,2—tetrachioro--

13218

Ethanethioamide

(1227

Ethane,

l,l,2—trichloro—

11043

Ethene,

chloro—

(3042

Ethene,

2—chloroethoxy—

U078

Ethene,

l,1—dichloro—

UO79

Ethene, trans—1,2—dichloro—

U210

Ethene, 1,l,2,2—tetrachloro—

0173

Ethanol, 2,2’—(nitrosoimino)bis—

0004

Ethanone, 1—phenyl—

13006

Ethanoyl chloride CC,R,T)

(3359

2—Ethoxyethanol

(3112

Ethyl acetate

(I)

(3113

Ethyl acrylate

(I)

0238

Ethyl carbamate

(urethan)

0038

Ethyl 4,4’—dichlorobenzilate

(3114

Ethylenebis(dithiocarbamic acid)

3067

Ethylene dibromide

0077

Ethylene dichloride

0359

Ethylene

glycol

monoethyl

ether

0115

Ethylene oxide

(I,T)

0116

Ethylene thiourea

(3117

Ethyl ether

(I)

(3076

Ethylidene

dichloride

(3118

Ethylmethacrylate

0119

Ethyl methanesulfonate

13139

Ferric dextran

0120

Fluoranthene

11122

Formaldehyde

13123

Formic acid

(C,T)

0124

Furan

(I)

73-521

---

—48—

Ul25

2—Furaricarboxaldehyde

(I)

13147

2,5—Furandione

0213

Furan, tetrahydro—

(I)

u125

Furfural

CI)

Ul24

Furfuran

(I)

(3206

D—Glucopyranose,

2—deoxy—2—(3—methyl—3—

nitrosoureido)—

13126

Glycidylaldehyde

Ul63

Guanidine, N—nitroso—N—methyl—N’—nitro

Ul27

Hexachlorobenzene

0128

Hexachiorobutadiene

Ul29

Hexachlorocyclohexane

Cgamma isomer)

0130

Hexachlorocyclopentadiene

U131

Hexachloroetharie

0132

Hexachiorophene

U243

Hexachloropropene

(3133

Hydrazine

(R,T)

0086

Hydrazine, l,2—diethyl—

0098

Hydrazine,

l,1—dimethyl—

U099

Hydrazine, 1,2—diniethyl-

0109

Hydrazine, 1,2—Diphenyl-

13134

Hydrofluoric acid

(C,T)

0134

Hydrogen fluoride (C,T)

13135

Hydrogen sulfide

U096

Hydroperoxide, 1—methyl—l—phenylethyl—

CR)

13136

Hydroxydimethylarsine oxide

0116

2—Imidazolidinethione

U137

Indenol,2,3—cdpyrene

0139

Iron dextran

Ul40

Isobutyl alcohol

(I,T)

0141

Isosafrole

13142

Kepone

(3143

Lasiocarpene

Ul44

Lead acetate

Ul45

Lead phosphate

13146

Lead subacetate

(3129

Lindarie

(3147

Maleic anhydride

13148

Maleic hydrazide

0149

Malononitrile

0150

Meiphalan

0151

Mercury

(3152

Methacrylonitrile (I,T)

13092

Methanamine, N—methyl—

(I)

0029

Methane, bromo

13045

Methane, chioro—

(I,T)

0046

Methane, chloromethoxy—

U068

Methane, dibromo-

(3080

Methane, dichloro-

13075

Methane, dichlorodifluoro—

1.3138

Methane,

iodo—

(3119

Methanesulfonic acid,

ethyl

ester

13211

Methane,

tetrachloro—

13121

Methane, trichlorofluoro—

73522

—49—

(3153

Methanethiol

(I,T)

0225

Methane,

tribromo—

(3044

Methane, trichloro—

0121

Methane, trichlorofluoro—

U123

Methanoic acid

(C,T)

(3036

4,7—Methanoindan, 1,2,4,5,6,7,8,8—

octachloro—3a,4,7,7a—tetrahydro—

Ul54

Methanol

(I)

13155

Methapyrilene

0154

Methyl alcohol

(I)

0029

Methyl bromide

0186

1—Methylbutadiene

CI)

U045

Methyl chloride

(I,T)

13156

Methyl chlorocarbonate

(I,T)

0226

Methylchloroform

0157

3—Methylcholanthrene

(3158

4,4 ‘—Methylenebis(2—chloroaniline)

0132

2,2’—Methylenebis(3,4,6—trichlorophenol)

(3068

Methylene bromide

0080

Methylene chloride

0122

Methylene oxide

0159

Methyl ethyl

ketone

(I,T)

13160

Methyl ethyl ketone peroxide

(R,T)

U138

Methyl iodide

0161

Methyl isobutyl ketone

(I)

13162

Methyl methacrylate

(I,T)

13163

N—Methyl—N’—nitro—N—nitrosoguanidme

(3161

4—Methyl—2—pentanone

(I)

U164

Methyithiouracil

(3247

Methoxychlor

13010

Mitomycin

C

0059

5,12—Naphthacenedione, (8S—cis)—8—acetyl—10—

(3—amino—2,3,6—trideoxy—alpha—L—lyxo—

hexapyranosyl )oxyl —7,8,9,10—tetrahydro—

6,8,ll—tr ihydroxy—1—methoxy—

13165

Naphthalene

(3047

Naphthalene, 2—chioro—

13166

1,4—Naphthalenedione

0236

2,7—Naphthalenedisulfonic acid,

3,3’—(3,3’—

dimethyl—(1,l’—biphenyl)—4,4’—diyl)—

bis(azo)bis(5—amino—4—hydroxy)—,

tetrasodium

salt

0166

l,4—Naphthaquinone

U167

1—Naphthylamine

Ul68

2—Naphthylamine

0167

alpha—Naphthylamine

13168

beta—Naphthylamine

U026

2—Naphthylamine,

N,N’—bisC2—chloromethyl)—

(3169

Nitrobenzene

(I,T)

(3170

p—Nitrophenol

(3171

2—Nitropropane (I~~)

(3172

N—Nitrosodi—n—butylamine

1.3173

N—Nitrosodiethanolamine

13174

N—Nitrosodiethylarnine

73-523

---

—50—

0111

N-Nitroso—N-propylamine

0176

N—Nitroso—N—ethylurea

13177

N—Nitroso—N—methylurea

13178

N—Nitroso—N—methylurethane

U179

N—Nitrosopiperidine

0180

N—Nitrosopyrrolidine

(3181

5—Nitro—o—toluidine

U193

l,2—Oxathiolane,

2,2—dioxide

3058

2H—l,3,2—Oxazaphosphorine, 2—bisC2—chloro—

ethyl)aminotetrahydro—,

oxide 2—

(3115

Oxirane

(I,T)

0041

Oxarane, 2—(chloromethyl)—

Ul82

Paraldehyde

U183

Pentachlorobenzene

0184

Pentachloroethane

(3185

Pentachloronitrobenzene

See F027

Pentachlorophenol

U186

l,3—pentadiene

(I)

0187

Phenacetin

0188

Phenol

U048

Phenol,

2—chloro-

U039

Phenol, 4—chloro—3—methyl—

U08l

Phenol, 2,4—dichloro—

U082

Phenol, 2,6—dichloro—

0101

Phenol, 2,4—dimethyl—

0170

Phenol,

4—nitro—

See F027

Phenol, pentachloro—

See F027

Phenol, 2,3,4,6—tetrachloro—

See F027

Phenol, 2,4,5—trichloro—

See F027

Phenol, 2,4,6—trichioro—

0137

1,lO—(l,2—phenylene)pyrene

0145

Phosphoric acid,

lead salt

U087

Phosphorodithioic acid, O,O—diethyl—, S—

methyl—ester

0189

Phosphorous sulfide

CR)

U190

Phthalic anhydride

0191

2—Picoline

0192

Pronamide

(3194

1—Propanamine

(I,T)

UllO

1—Propanamine, N—propyl—(I)

(3066

Propane, 1,2—dibromo—3—chloro—

0149

Propanedinitrile

3171

Propane, 2—nitro— (I~~)

3027

Propane, 2,2’—oxybis2—chloro—

0il93

1,3—Propane sultone

(3235

l—Propanol,

2,3—dibromo—, phosphate

(3:1)

(3126

l—Propanol, 2,3—epoxy—

(3140

1—Propanol,

2—methyl—

CI,T)

0002

2—Propanone

(I)

0007

2—Propenamide

0084

Propene,

1,3—dichloro—

(3243

l—Propene,

1,1,2,3,3,3—hexachioro—

(3009

2—Propenenitrile

(3152

2—Propenenitrile,

2—methyl—

(I,T)

73-524

---

—51-

0008

2—Propenoic acid

(I)

Ul13

2—Propenoic acid, ethyl ester

(I)

(3118

2—Propenoic acid,

2—methyl—,

ethyl ester

0162

2—Propenoic acid,

2—methyl—, methyl ester

(I ,T)

See

F027

Propionic

acid,2—(2,4,5—trichlorophenoxy)—

0194

n—Propylamine

(I,T)

0083

Propylene dichioride

(3196

Pyridine

0155

Pyridine, 2—(2—(dimethylamino)—2—

thenylamino

—

(3179

Pyridine, hexahydro—N—nitroso-

0191

Pryidine, 2—methyl—

13164

4(1H)—Pyrimidinone, 2,3—dihydro—6—niethyl—2—

thioxo-

(3180

Pyrrole, tetrahydro—N—nitroso—

0200

Reserpine

13201

Resorcinol

(.3202

Saccharin and salts

0203

Safrole

U204

Selenious acid

(3204

Selenium

dioxide

0205

Selenium disulfide

(R,T)

0015

L—Serine,

diazoacetate

(ester)

See F027

Silvex

U089

4,4’—Stilbenediol, alpha, alpha’—diethyl—

0206

Streptozotocin

Ul35

Sulfur hydride

0103

Sulfuric acid, dimethyl ester

0189

Sulfur phosphide

(R)

0205

Sulfur selenide

(R,T)

See F027

2,4,5—T

0207

l,2,4,5—Tetrachlorobenzene

0208

1,l,l,2—Tetrachloroethane

0209

1,l,2,2—Tetrachloroethane

U2l0

Tetrachloroethylene

See F027

2,3,4,6—Tetrachlorophenol

13213

Tetrahydrofuran

(I)

U214

Thallium

(I)

acetate

U215

Thallium

(I) carbonate

U216

Thallium

(I)

chloride

0217

Thallium

(I)

nitrate

(3218

Thioacetamide

Ul53

Thiomethanol

(I,T)

U2l9

Thiourea

0244

Thiram

0220

Toluene

(3221

Toluenediamine

0223

Toluene diisocyanate

CR,T)

(3328

o—Toluidine

13353

p—Toluidine

(3222

o—Toluidine hydrochloride

13011

lH—1,2,4—Triazol—3—amine

tJ226

l,l,l—Trichloroethane

73.525

---

—52—

U227

1,l,2—Trichloroethane

13228

Trichioroethene

13228

Trichioroethylene

0121

Trichloromonofluoromethane

See F027

2,4,5—Trichiorophenol

See F027

2,4,6—Trichlorophenol

See F027

2,4,5—Trichiorophenoxyacetic acid

U234

sym—Trinitrobenzene

(R,T)

0182

l,3,5—Trioxane, 2,4,5—trimethyl—

0235

Tris(2,3—dibromopropyl) phosphate

(1236

Trypari blue

0237

Oracil, 5bisC2—chloromethyl)amino—

(3237

tjracil mustard

0043

Vinyl chloride

(3248

Warfarin, when present at concentrations of

0.3

or less

0239

Xylene

(I)

13249

Zinc

phosphide,

when

present

at

concentrations

of

10

or

less

(3200

Yohimban—l6—carboxylic acid,

ll,l7—di—

methoxy—lB—(3,4,5—trimethoxy—benzoyl)oxy—

,methyl ester

Source:

Amended at 10 Ill. Reg.

,

effective

Appendix C

Chemical Analysis Test Methods

The Board incorporates by reference 40 CFR 261, Appendix III

(1985), as amended at 50 Fed. Reg.

42942, October

23,

1985,

at

51

Fed.

Reg.

5330, February

13,

1986 and at

51 Fed. Reg.

6541,

February 25,

1986.

This Section incorporates no future editions

or modifications.

(Source:

Amended

at

10

Ill.

Reg.

effective

)

Appendix G Basis for Listing Hazardous Wastes

EPA

Hazardous constitutents

for which

listed

hazardous

waste No.

FOOl

Tetrachloroethylene, niethylene chloride,

trichioroethylene,

i,1,1—trichloroethane,

carbon

tetrachloride, chlorinated fluorocarbons.

F002

Tetrachloroethylene, methylene chloride,

trichloroethyiene, l,l,1—trichloroethane,

1,1,2—trichloroethane,

chlorobenzene, 1,1,2—

trichloro—l,2,2— trifluoroethane,

ortho—

dichlorobenzene,

trichlorofluoromethane.

73.526

---

—53—

F003

N.A.

F004

Cresols and cresylic acid, nitrobenzene.

F005

Toluene, methyl ethyl

ketone,

carbon

disulfide,

isobutanol,

pyridine,

2—

ethoxyethanol, benzene, 2—nitropropane

F006

Cadmium, hexavalent chromium, nickel, cyanide

C complexed).

F007

Cyanide

(salts).

F008

Cyanide

Csalts).

F009

Cyanide

(salts).

FOlO

Cyanide

(salts).

FOil

Cyanide

(salts).

F012

Cyanide

(complexed).

F019

Hexavalent chromium, cyanide (complexed).

F020

Tetra— and pentachlorodibenzo—p—dioxins;

tetra— and pentachlorodibenzofurans; tn— and

tetrachlorophenols and their chiorophenoxy

derivative acids, esters, ethers,

amines and

other

salts.

F02l

Penta— and hexachiorodibenzo—p-dioxins; penta—

and hexachlorodibenzofurans; pentachlorophenol

and its derivatives.

F022

Tetra-, penta— and hexachlorodibenzo—p—

dioxins;

tetra—, penta— and

hexachlorodibenzofurans.

F023

Tetra— and pentachlorodibenzo—p—dioxins;

tetra-

and pentachiorodibenzofurans; tn— and

tetra- chlorophenols and their chlorophenoxy

derivative acids, esters, ethers,

amines and

other salts.

F024

Chioromethane, dichloromethane,

trichloromethane,

carbon

tetrachioride,

chloroethylene,

1,1—

dichioroethane,

1,2—dichloroethane, trans—l,2—

dichloroethylene,

l,l—dichloroethylene, 1,1,1—

trichloroethane,

l,1,2—trichloroethane,

trichloroethylene, l,l,1,2—tetrachloroethane,

1,1,2,

2—tetrachioroethane,

tetrachloroethylene, pentachioroethane,

hexachloroethane, allyl chloride

(3—

chloropropene), dichloropropane,

dichloropropene, 2—chloro—1,3—butadiene,

hexachloro—l,3—butadiene, hexachlorocyclo—

pentadiene, hexachlorocyclohexane, benzene,

chlorobenzene,

dichiorobenzenes,

1,2,4—

trichlorobenzene, tetrachlorobenzenes,

pentachlorobenzene, hexachlorobenzene,

toluene, naphthalene.

F026

Tetra—, penta—,

and hexachlorodibenzo-p—

dioxins;

tetra—,

penta-, and hexachlorodibenzofurans.

F027

Tetra—, penta—, and hexachiorodibenzo—p—

dioxins;

tetra—, penta—,

and hexachlorodibenzofurans;

73.527

---

—54—

tn—,

tetra—, and pentachlorophenols and their

chlorophenoxy derivative acids, esters,

ethers, amine and other

salts.

F028

Tetra—, penta—, and hexachlorodibenzo—p—

dioxins;

tetra—, penta—, and hexachlorodibenzofurans;

tn—,

tetra—, and pentachlorophenols and their

chiorophenoxy derivative acids, esters,

ethers,

amine

and

other

salts.

1001

Pentachiorophenol, phenol,

2—chlorophenol, p—

chloro—m—cresol,

2,4—dimethyiphenol,

2,4—

dinitrophenol, trichlorophenols,

tetrachiorophenols,

2,4—dinitrophenol,

cresosote, chrysene, naphthalene,

fluoranthene, benzo(b)fluoranthene,

benzo(a)pyrene,

indeno(l,2,3—cd)pyrene,

benz(a)anthracene, dibenz(a)anthracene,

acenaphthalene.

1002

Hexavalent chromium,

lead.

1003

Hexavalent chromium,

lead.

1004

Hexavalent chromuim.

1005

Hexavalent chromium,

lead.

1006

Hexavalent chromium.

1007

Cyanide

(complexed), hexavalent chromium.

1008

Hexavalent chromium.

1009

Chloroform, formaldehyde, rnethylene chloride,

methyl chloride, paraldehyde,

formic acid.

1010

Chloroform, formaldehyde, methylene chloride,

methyl chloride, paraldehyde,

formic acid,

chl oroacetaldehyde.

1011

Acrylonitrile, acetonitnile, hydrocyanic acid.

1013

Hydrocyanic acid,

acrylonitnile, acetonitnile.

1014

Acetonitrile, acrylamide.

1015

Benzyi chloride, chlorobenzerie,

toluene,

benzotrichlor ide.

1016

Hexachlorobenzene, hexachlorobutadiene, carbon

tetr achior ide, hexachioroethane,

perchloroethylene.

1017

Epichlorohydnin, chioroethers

bis( chloromethyl)

ether and bis—(2—chloroethyl) ethers

,

trichloropropane, dichloropropanols.

1018

1,2—dichloroethane, tnichioroethylene,

hexachlorobutadiene, hexachiorobenzene.

1019

Ethylene dichlonide, 1,l,l—trichloroethane,

1,1,2—trichioroethane,

tetrachioroethanes

(l,l,2,2—tetrachloroethane and 1,1,1,2—

tetrachioroethane), trichloroethylene,

tetrachloroethylene,

carbon tetrachionide,

chloroform, vinyl chloride, vinylidene

chloride.

K020

Ethylene dichloride, 1,1,l—trichloroethane,

1,1,2—trichioroethane,

tetrachloro—ethanes

(l,1,2,2—tetrachloroethane and 1,1,1,2—

73-528

---

—55—

tetrachioroethane),

trichioroethylene,

tetrachloroethylene, carbon tetrachlonide,

chloroform, vinyl chloride, vinylidene

chloride.

1021

Antimony, carbon tetrachloride, chloroform.

1022

Phenol, tars Cpolycyclic aromatic

hydrocarbons).

1023

Phthalic anhydride,

maleic anhydnide.

1024

Phthalic anhydnide,

i,4—naphthoguinone.

K025

Meta—dinitrobenzene,

2,4—dinitrotoluene.

1026

Paraidehyde, pyridines,

2—picoline.

K027

Toluene diisocyanate, toluene—2,

4—diamine.

1028

l,i,l—tnichloroethane, vinyl chloride.

K029

1,2—dichioroethane, l,l,l—trichloroethane,

vinyl

chloride, vinylidene chloride, chloroform.

1030

Hexachlorobenzene, hexachlorobutadiene,

hexachloroethane, 1,1,l,2—tetrachloroethane,

l,l,2,2—tetrachloroethane, ethylene

dichlonide.

1031

Arsenic.

1032

Hexachlorocyclopentadiene.

1033

Hexachiorocyclopentadiene.

K034

Hexachlorocyclopentadiene.

1035

Creosote, chrysene, naphthalene,

fluoranthene,

benzo(b) fluoranthene, benzo(a)—pyrene,

indeno(i,2,3—cd) pyrene, benzo(a)anthracene,

dibenzo(a)anthracene, acenaphthalene.

1036

Toluene, phosphorodithioic and phosphorothioic

acid esters.

1037

Toluene, phosphorodithioic and phosphorothioic

acid esters.

1038

Phorate,

formaldehyde, phosphorodithioic and

phosphorothioic acid esters.

1039

Phosphorodithioic and phosphorothioic acid

esters.

1040

Phorate, formaldehyde, phosphorodithioic and

phosphorothioic acid esters.

1041

Toxaphene.

1042

Hexachlorobenzene,

ortho—dichlorobenzene.

1043

2,4—dichiorophenol, 2,6—dichlorophenol,

2,4,6—

tnichiorophenol.

1044

N.A.

1045

N.A.

1046

Lead

1047

N.A.

1048

Hexavalent

chromium,

lead.

1049

Hexavalent chromium,

lead.

1050

Hexavalent chromium.

1051

Hexavalent chromium,

lead.

1052

Lead

1060

Cyanide, naphthalene, phenolic compounds,

arsenic.

K06l

Hexavalent chromium,

lead, cadmium.

73-529

---

—56—

1062

Hexavalent chromium, lead.

1069

Hexavalent chromium,

lead, cadmium.

K071

Mercury.

1073

Chloroform,

carbon tetrachlonide,

hexachioroethane,

trichloroethane,

tetrachloroethylene, dichloroethylene,

1,1,2, 2—tetrachloroethane.

1083

Aniline, diphenylamine, nitrobenzene,

phenylenediamine.

1084

Arsenic.

K085

Benzene, dichlorobenzenes, tnichlorobenzenes,

tetrachlorobenzenes, pentachlorobenzene,

hexachlorobenzene, benzyl chloride.

1086

Lead, hexavalent chromium.

1087

Phenol, naphthalene.

1093

Phthalic anhydnide maleic anhydnide.

1094

Phthalic anhydride.

1095

1,1,2—tnichioroethane,

1,1,1,2—

tetrachloroethane, l,l,2,2—tetrachloroethane.

1096

l,2—dichioroethane, l,i,i,—trichloroethane,

1,1,

2—tr ichi oroethane.

1097

Chlordane,

heptachior.

1098

Toxaphene.

K099

2,4—dichlorophenoi, 2,4,6—tnichlorophenol.

1100

Hexavalent chromium,

lead, cadmium.

1101

Arsenic.

K102

Arsenic.

1103

Aniline, nitrobenzene, phenylenediamine.

K104

Aniline, benzene, diphenylamine, nitrobenzene,

phynylenediamine.

1105

Benzene, monochlorobenzene,

dichlorobenzenes,

2,4, 6—tnichlorophenol.

Ki06

Mercury.

1111

2,4—Dinitrotoluene.

Ki12

2,4—Toluenediamine, o—toluidine, p—toluidine,

aniline.

1113

2,4—Toluenediamine, o—toluidine, p—toluidine,

aniline.

1114

2,4—Toluenediamine, o—toluidine, p—toluidine.

1115

2,4—Toluenediamine.

1116

Carbon tetrachlonide, tetrachloroethylene,

chloroform, phosgene.

1117

Ethylene dibromide

1118

Ethylene dibromide

1136

Ethylene dibromide

N.A.——Waste

is hazardous because

it fails the test for the

characteristic of

ignitability, corrosivity,

or reactivity.

(Source:

Amended at

10

Ill. Reg.

effective

Appendix H

Hazardous Constituents

73.530

---

—57—

acetonitrile (ethanenitrile)

acetophenone

(ethanone, 1—phenyl—)

3—Calpha-acetonylbenzyi)—4—hydroxycoumarin and salts

(warfanin)

2—acetylaminofluorene

(acetamide,

N—(9H—fluoren—2—yl)—)

acetyl chloride

(ethanoyl chloride)

l—acetyi—2—thiourea

(acetamide,

N—(aininothioxomethyi)—)

acrolein

C2—propenal)

acrylamide (2—propenamide)

acrylonitnile (2—propenenitrile)

afiatoxins

aldnin

(l,2,3,4,10,lO—hexachloro—l,4,4a,5,8,8a—hexahydro—

endo,exo—l,4: 5,8—dimethanonaphthalene)

allyl alcohol

(2—propen—1—ol)

aluminum phosphide

4—aminobiphenyl

C

1,l’—biphenyi—4—amine)

6—amino—l,la,2,8,8a,8b—hexahydro—8—(hydroxymethyi)—8a—

methoxy—5—methylcarbamate azirino2’

,3’ :3,4pyrrolo

1,2alindole—4,7—dione,

(ester)

(rnitomycin

C)

(azirino2’,3’:3,4pyrrolo(l,2a)indole—4,7—dione,

6—amino—8—((aminocarbonyl)oxy)methyl—l,la,2,8,8a,8b—

hexahydro-8a--methoxy—5—methyl—)

5—C

aminomethyl )—3—isoxazolol

(3(2H)—jsoxazoione, 5—(aminomethyl)—)

4—aminopynidine (4—pynidinamine)

amitrole

(lH—l,2,4—tniazol—3—amine)

aniline (benzenamine)

antimony and compounds, N.O.S.

(not otherwise specified)

anami te

(sulfurous acid,

2—chloroethyl—,

2—4—(l,l—

dimethylethyl)phenoxy

—1—methylethyl ester)

arsenic and compounds, N.O.S.

arsenic acid (orthoarsenic acid)

arsenic pentoxide (arsenic

(V)

oxide)

arsenic tnioxide

(arsenic

(III) oxide)

auramine

(benzenamine, 4,4’—carbonmmidoylbisN,N—dimethyl—,

monohydrochioride

azasenine

(L—serine, diazoacetate

(ester))

barium and compounds, N.0.S.

barium cyanide

benzc

acnidine

(3,4—benzacridine)

benz a

anthracene

(1 ,2—benzanthracene)

benzene

(cyclohexatriene)

benzene, 2—amino—i—methyl

(o—toluidine)

benzene, 4—amino—1—methyl

(p—toluidine)

benzenearSOnic acid (arsonic acid,

phenyl—)

benzene, dichloromethyi—

(benzal chloride)

benzenethiol

(thiophenol)

benzidine (l,l’—biphenylj—4,4’—diamine)

benzo(b)fluoranthene (2,3—benzofluoranthene)

73-531

---

—58—

benzo(j)fluoranthene

(7,8—benzofluoranthene)

benzo(a)pyrene (3,4—benzopyrene)

p—benzoquinone

(1

,

4—cyclohexadienedione)

benzotrichloride (benzene, tnichioromethyl—)

benzyl

chloride

(benzene,

(chloroxnethyl)—)

beryllium and compounds, N.O.S.

bis(2—chloroethoxy)methane

(ethane, 1,i’—methylenebis(oxy)bis2—chloro—

bis(2—chloroethyl)

ether

(ethane, l,1’—oxybis2—chloro—

N,N—bis( 2—chloroethyl)—2—napthyiainine

(chlornaphazine)

bis(2—chloroisopropyl)

ether

(propane, 2,2’—oxybis2—chioro—)

bis(chloromethyi) ether

(methane, oxybischlorol—)

bis(2—ethyihexyl) phthaiate

(l,2—benzenedicarboxylic acid, bis(2—ethylhexyl)

ester)

bromoacetone (2—propanone, 1—bromo—)

bromomethane (methyl bromide)

4—bromophenyl phenyl ether

(benzene, 1—bromo—4—phenoxy-)

brucine (strychnidin—lO—one,

2,3—dimethoxy—)

2—butanone peroxide (methyl ethyl ketone, peroxide)

butyl benzyl phthalate

(l,2—benzenedicarboxylic acid, butyl phenylmethyl ester)

2-sec—butyl—4,6—diriitrophenol

(DNBP)

(phenol, 2,4—dinitro—6—(l—methylpropyi)—)

cadmium and compounds, N.O.S.

calcium chromate

(chronic acid,

calcium salt)

calcium cyanide

carbon disulfide (carbon bisulfide)

carbon oxyfluoride (carbonyl fluoride)

chioral

Cacetaldehyde, trichloro—)

chiorambucil

(butanoic acid, 4—tbis(2—chloroethyi)aminobenzene—)

chlordane (alpha and gamma isomers)

(4, 7—metharioindan,l,2,4,5,6,7,8, 8—octachloro—

3,4,7,7a—tetrahydro—)

(alpha and gamma isomers)

chlorinated benzenes, N.O.S.

chlorinated ethane, N.O.S.

chlorinated fluorocarbons, N.O.S.

chlorinated naphthalene,

N.O.S.

chlorinated phenol, N.O.S.

chloroacetaldehyde (acetaldehyde,

chloro—)

chioroalkyl ethers, N.0.S.

p—chloroaniline (benzeneamine, 4—chloro—)

chlorobenzene

(benzene, chloro—)

chlorobenzilate

(benzeneacetic acid,

4—chloro—alpha—(4—chlorophenyl)--

aipha—hydroxy—, ethyl ester)

(2—chloro—l ,3—butadiene

(chloroprene)

p—chloro—m—cresol

(phenol, 4—chloro—3—methyl—)

73-532

---

—59—

l—chloro—2, 3—epoxypropane

(oxirane,

2—(chioromethyl)—)

2—chioroethyl vinyl

ether

(ethene,

(2—chloroethoxy)—)

chloroform (methane, trichloro—)

chloromethane (methyl chloride)

chioromethyl methyl ether

(methane, chloromethoxy—)

2—chloronaphthalene (naphthaiene, beta-chloro-)

2—chlorophenol

(phenol, o—chloro—)

1—(o—chlorophenyi)thiourea (thiourea,

(2—chiorophenyl)—)

3—chloropropene

(allyl chloride)

3—chloropropionitrile (propanenitrile, 3—chloro—)

chromium and compounds,

N.0.S.

chrysene

(l,2—benzphenanthrene)

citrus red No.

2

(2—naphthol, 1—(2,5—dimethoxyphenyl)azoj—)

coal tars

copper cyanide

creosote (creosote, wood)

cresols (cresylic acid)

(phenol, methyl—)

crotonaldehyde

(2—butenal)

cyanides

(soluble salts and complexes), N.O.S.

cyanogen (ethanedinitrile)

cyanogen

bromide

(bromine

cyanide)

cyanogen

chloride

(chlorine

cyanide)

cycasin

(beta—D—glucopyranoside,

(methyl—ONN—azoxy)methyl—)

2—cyclohexyl—4,6—dinitrophenol

(phenol,

2—cyclohexyl—4,6—dinitro—)

cyclophosphamide

(2H—1,3,2—oxazaphosphorine,

bis(2—chloroethyl)amino—

tetrahydro—,

2—oxide)

d aunomycin

(5,i2—naphthacenedione,

(8S—cis)—8—acetyl—1O—

(3—amino—2,3,6—tnideoxy)—alpha—L—iyxo—hexopyranosyl)oxy—

7,8,9,lO—tetrahydro—6,8,1l—trihydroxy—l—methoxy—)

DDD

(dichiorodiphenyldichioroethane)

(ethane, l,i—dichloro—2,2—bis(p—chlorophenyl)—)

DDE

(ethylene,

l,i—dichloro—2,2—bis(4—chiorophenyl)—)

DDT

(dichlorodiphenyltrichloroethane)

(ethane, l,1,l—trichioro—2,2—bis(p—chlorophenyl)—)

diallate

(S—C2,3—dichloroallyl)diisopropylthiocarbamate)

dibenzfa,hacridine

(l,2,5,6—dibenzacnidine)

dibenza,jacridine

Ci,2,7,8—dibenzacridine)

dibenza,hanthracene

(l,2,5,6—dibenzanthracene)

7H—dibenzoc,gcarbazoie

(3,4,5,6—dibenzcarbazole)

dibenzoa,epyrene

(l,2,4,5—dibenzpyrene)

dibenzoa,hpyrene

(l,2,5,6—dibenzpyrene)

dibenzoa,ipyrene

(l,2,7,8—dibenzpyrene)

1, 2—dibromo—3—chloropropane

(propane, 1,2—dibromo—3—chloro—)

1,2—dibromoethane

(ethylene dibromide)

dibromomethane (methylene bromide)

“4”

---

—60—

di—n—butyl phthalate

(l,2—benzenedicarboxylic acid, dibutyl ester)

o—dichlorobenzene (benzene,

l,2—dichloro—)

ni—dichlorobenzene (benzene, l,3—dichloro—)

p—dichlorobenzene (benzene, l,4—dichloro—)

dichlorobenzene,

N.0.S.

(benzene,

dichloro—, N.O.S.)

3,3‘—dichlorobenzidine

(l,l’—biphenyl—4,4’—diamine,

3,3’—dichioro—)

l,4—dichloro—2—butene

(2—butene,

l,4—dichloro—)

dichlorodifiuoromethane (methane, dichlorodifluoro—)

1,l—dichloroethane (ethylidine dichloride)

1,2—dichloroethane

(ethylene dichioride)

trans—1,2—dichlorethene (l,2—dichlorethylene)

dichloroethylene,

N.0.S.

(ethene, dichloro—, N.0.S.)

l,1—dichloroethylene (ethene, l,l—dichloro—)

dichloromethane

(methylene chloride)

2,4—dichiorophenol (phenol, 2,4—dichioro—)

2,6—dichlorophenol

(phenol, 2,6—dichloro—)

2,4—dichlorophenoxyacetic acid (2,4—D), salts and esters

(acetic acid,

2,4—dichlorophenoxy—, salts and esters)

dichlorophenyl arsine

(phenyl dichloroarsine)

dichioropropane, N.0.S.

(propane, dichloro—,N.O.S.)

i,2—dichloropropane (propylene dichioride)

dichloropropanol,

N.O.S.

Cpropanol, dichloro—, N.O.S.)

dichloropropene, N.0.S.

(propene, dichloro—, N.0.S.)

1,3—dichioropropene (1—propene,

1,3—dichloro-)

dieldrin

(1,2,3,4,lO,10—hexachloro—6,7—epoxy—1,4,4a,5,6,7,8,8a—

octahydro—endo ,exo—l ,4 :5 ,8—dimethanonaphthalene)

1,2:3,4—diepoxybutane (2,2’—bioxirane)

diethylarsine

(arsine, diethyl—)

N,N’—diethylhydrazine (hydrazine,

1,2—diethyl—)

0,0—diethyl S—methyl ester of phosphorodithioic acid

(phosphorodithioic acid, O,O—diethyl

S—methyl ester)

O,O—diethylphosphoric

acid, 0—p—nitrophenyl ester

(phosphoric

acid, diethyl p—nitrophenyl ester)

diethyl phthalate

(l,2—benzenedicarboxylic acid,

diethyl ester)

0,0—diethyl 0—2—pyrazinyl phosphorothioate

(phosphorothioic acid,

O,O—diethyl O—pyrazinyl ester)

diethylstilbestrol

(4,4’—stilbenedioi, alpha,alpha—diethyi,

bis(dihydrogen phosphate,

CE)—)

dihydrosaf

role

(benzene,

1, 2—methylenedioxy—4—propyl—)

3,4—dihydroxy—alpha—(methylamino)methyl benzyl alcohol

(l,2—benzenediol, 4—1—hydroxy—2—(methylamino)ethyl—)

diisopropylfluorophosphate

(DFP)

(phosphorofluoridic acid, bis(l—methylethyl)

ester)

dimethoate

(phosphorodithioic

acid, 0,0—dimethyl

S—2—(methylamino)—2—oxoethyll

ester)

3,3 ‘—dimethoxybenzidine

73-534

---

—61—

(1,l’—biphenyi—4,4’—diamine,

3,3’—dimethoxy—)

p-dimethylaminoazobenzene

(benzenamine, N,N-dimethyi—4—(phenyiazo)-)

7,12—dimethyibenza

anthracene

(i,2—benzanthracene, 7,12—dimethyi—)

3,3 ‘—diinethylbenzidine

Cl,l’—biphenyi—4,4’—diamine,

3,3’—dimethyl—)

dimethyicarbamoyl chloride

(carbamaoyl chloride, dimethyl—)

l,1—dimethylhydrazine

(hydrazine, 1,1—dimethyl—)

l,2—dimethylhydrazine (hydrazine,

i,2—dimethyl—)

3,3—dimethyl—i—(methyithio)-2—butanone,

O—(methylamino)carbonyl

oxime

C

thiofanox)

alpha,alpha—dimethylphenethylamine

(ethanamine,

l,l—dimethyl-2—phenyl—)

2,4—dimethylphenol

(phenol,

2,4—dimethyl—)

dimethyl phthalate

(l,2—benzenedicarboxylic acid, dimethyl ester)

dimethylsulfate

(sulfuric acid, dimethyl ester)

dinitrobenzene,

N.0.S.

(benzene, dinitro—, N.0.S.)

4,6—dinitro—o—cresoi and salts

Cphenol, 2,4—dinitro—6—methyl-,

and salts)

2,4—dinitrophenol

(phenol,

2,4—dinitro—)

2,4—dinitrotoiuene

(benzene, 1—methyl—2,4—dinitro—)

2,6—dinitrotoluene

(benzene, 1—methyl—2,6—dinitro—)

di—n—octyl phthalate

(l,2—benzenedicarboxylic acid,

dioctyl ester)

1,4—dioxane

(1,4—diethylene oxide)

diphenylamine

(benzenamine,

N—phenyl—)

i,2—diphenylhydrazine (hydrazine, l,2—diphenyl—)

di—n—propylnitrosainine (N—nitroso--di—n—propylamine)

disulfoton

(O,O—diethyi S—(2—(ethylthio)ethyl

phosphorodithioate

2,4—dithiobiuret (thioimidodicarbonic diamide)

endosuif

an

(5—norbornene, 2,3—dimethanol,

l,4,5,6,7,7—hexachloro--,

cyclic sulfite)

endrin

and metabolites

(l,2,3,4,lO,1O—hexachlono—6,7—epoxy—1,4,4a,5,6,7,8,8a—

octahydro—endo,endo—l

,

4: 5,8—dimethanonaphthalene,

and metabolites)

ethyl carbamate

(urethan)

(carbamic acid, ethyl

ester)

ethyl cyanide (proparienitrile)

ethylenebisdithiocarbamic

acid, salts

arid esters

(l,2—ethanediylbiscarbamodithioic

acid,

salts and esters)

ethylene glycol monoethyl ether

(ethanol, 2—ethoxy-)

ethyleneimine

(aziridine)

ethylene oxide

(oxirane)

ethylenethiourea

(2—imidazolidinethione)

ethyl methacrylate (2—propenoic acid,

2—methyl—,

ethyl ester)

73.535

---

—62—

ethyl methanesulfonate Cmethanesulfonic

acid, ethyl

ester)

fluoranthene (benzoj

,k fluorene)

fluorine

2—fluoroacetamide

(acetamide,

2—fluoro—)

fluoroacetic acid,

sodium salt

(acetic

acid,

fluoro—,

sodium

salt)

formaldehyde

(methylene oxide)

formic acid (methanoic acid)

glycidylaldehyde (1-propanal,

2,3—epoxy—)

halomethane, N.0.S.

heptachlor

(4,7—methano—1H—idene,

1,4,5,6,7,8 ,8—heptachloro—

3a, 4,7 ,7a—tetrahydro—)

heptachlor epoxide

(alpha, beta and gamma

isomers)

(4,7—methano—lH—indene, 1,4,5,6,7,8,8—heptachloro—

2,3—epoxy—3a,4,7,7—tetrahydro—, alpha, beta and

gamma

isomers)

hexachlorobenzene

(benzene, hexachloro—)

hexachiorobutadiene

(l,3—butadiene, hexachloro—)

hexachlorocyclohexane

Call isomers)

(lindane and isomers)

hexachlorocyclopentadiene

(cyclopentadiene, hexachloro—)

hexachlorodibenzo—p—dioxins

hexachlorodibenzofurans

hexachloroethane

(ethane, hexachloro—)

l,2,3,4,lO,iO—hexachioro—1,4,4a,5,B,8a—hexahydro—l,4:5,8—

endo

,

endo—dimethanonaphthalene

(hexachlorohexahydro—endo,endo—dimethanonaphthalene)

hexachiorophene

(2,2’—methylenebis(3,4,6—trichlorophenol))

hexachloropropene (propene, hexachloro—)

hexaethyl tetraphosphate

(tetraphosphoric acid, hexaethyl ester)

hydrazine

(diarnine)

hydrocyanic acid (hydrogen cyanide)

hydrofluoric acid (hydrogen fluoride)

hydrogen sulfide

hydroxydimethylarsine oxide

(cacodylic acid)

indeno(l,2,3—cd) pyrene

l,10—(1,2—phenylene)pyrene)

iodomethane

(methyl iodide)

iron dextran (ferric dextran)

isocyanic acid, methyl ester

(methyl isocyanate)

isobutyi a’lcohol

(l—propanol, 2—methyl—)

isosafrole (benzene, l,2—methylenedioxy—4—allyl—)

kepone

C

decachlorooctahydro—1

,

3,4—metheno—2H—

cyclobutacd

pentalen—2—one)

lasiocarpine

(2—butenoic acid,

2—methyl—,

7—(2,3—dihydroxy—

2—(1—methoxyethyi)—3—methyl—1—oxobutoxy)methyi

-

2,3,5,7a—tetrahydro—lH—pyrrolizin—1—yl

ester)

lead and compounds, N.0.S.

73.536

---

—63—

lead acetate

(acetic acid, lead salt)

lead phosphate (phosphoric acid, lead salt)

lead subacetate

(lead, bis(acetato—0)tetrahydroxytri—)

maleic anhydride (2,5—furandione)

maleic hydrazide

(l,2—dihydro—3,6—pyridazinedione)

malononitriie (propanedinitrile)

meiphalan

alanine,

3—(p—bis(2—chloroethyl)amino)phenyl—,

L—)

mercury fulminate

(fulminic acid, mercury salt)

mercury and compounds, N.0.S.

methacrylonitrile

(2—propenenitrile,

2—methyl—)

methanethiol

(thiomethanol)

methapyrilene

(pyridine, 2—(2—diinethylamino)ethyl—2—thenylamino—)

metholmyl

(acetimidic acid, N—(methylcarbamoyl)oxythio—,

methyl ester)

methoxychior

(ethane,

l,1,l—trichloro—2,2’—bisCp—methoxyphenyi)—)

2—methylaziridine

(1,2—propylenimine)

3—methyicholanthrene

(benz

j

aceanthrylene,

1, 2—dihydro—3—methyl—)

methylchlorocarbonate

(carbanochloridic acid, methyl ester)

4,4 ‘—methylenebisC2—chioroaniline)

4,4 ‘—rnethylenebis(2—chlorobenzenamine))

methyl ethyl

ketone

(MEK)

C2—butanone)

methyl hydrazine (hydrazine, methyl—)

2—methyilactonitrile (propanenitrile, 2—hydroxy—2—methyi—)

methyl methacrylate (2—propenoic acid, 2—methyl—,

methyl ester)

methyl methanesulfonate

(methanesulfonic acid,

methyl ester)

2—methyl—2—(methylthio(propionaldehyde—0—

(methylcarbonyl)

oxitne

(propanal,

2—methyl—2—(inethylthio)—,

0—

(methylamino)carbonyl

oxmme)

N—methyl—N’—nitro—N—nitrosoguanidine

(guanidine, N—nitroso—N—methyl—N’—nitro—)

methyl

parathion

(O,O—dimethyl O—(4—nitrophenyl) phosphorothioate)

methylthiouracil

(4—1H—pyrimidinone,

2, 3—dihydro—6—methyl—2—thioxo—)

mustard gas

(sulfide, bis(2—chloroethyl)—)

naphthalene

l,4—naphthoquinone (l,4—naphthalenedione)

l—naphthyiamine (aipha—naphthylamine)

2—naphthyiamine (beta—naphthylamine)

1—naphthyl—2—thiourea (thiourea,

l—naphthalenyl—)

nickel

and compounds, N.O.S.

nickel carbonyl (nickel tetracarbonyl)

nickel cyanide (nickel

(II) cyanide)

nicotine

and

salts

(pyridine,

(S)—3—(l—methyl—2—pyrrolidinyl)—, and salts)

nitric oxide (nitrogen

(II)

oxide)

p—nitroaniline (benzenamine, 4—nitro—)

73.537

---

—64—

nitrobenzene (benzene, nitro—)

nitrogen dioxide (nitrogen

(IV)

oxide)

nitrogen mustard and hydrochloride salt

(ethanamine,

2—chloro—, N—(2—chloroethyl)—N—methyl—,

and hydrochloride salt)

nitrogen mustard N—oxide and hydrochloride salt

(ethanainine, 2—chloro—, N—(2—chloroethyl)—N—methyl—,

N—oxide,

and hydrochloride salt)

nitroglycerin (1,2,3—propanetriol, trinitrate)

4—nitrophenol (phenol,

4—nitro—)

2—nitropropane

(propane,

2—nitro—)

4—nitroquinoline—l—oxide

(quinoline, 4—nitro—l—oxide—)

nitrosamirie, N.0.S.

N—nitrosodi—n—butylamine (1—butanamine, N—butyl—N—nitroso—)

N—nitrosodiethanolamine (ethanol, 2,2’—(nitrosoimino)bis-)

N—nitrosodiethylamine (ethanamine, N—ethyl—N—nitroso-)

N—nitrosodimethylamine

Cdimethylnitrosamine)

N—ni troso—N—ethylurea

(carbamide, N—ethyl—N—nitroso—)

N—nitrosomethylethylarnine (ethanamine, N—ntethyl—N—nitroso—)

N—ni troso—N—inethylurea

(carbamide,

N—inethyl—N—nitroso-)

N—ni troso—N--me thyl urethane

(carbamic acid, methylnitroso—,

ethyl ester)

N—nitrosomethylvinylamine

(ethenamine, N—niethyl—N—nitroso—)

N—rtitrosomorpholine

(morpholine, N—nitroso—)

N—nitrosonornicotine (nornicotine, N—nitroso--)

N—nitrosopiperidine

(pyridine,

hexahydro—,

N—nitroso—)

N—nitrosopyrrolidine (pyrrole, tetrahydro—, N—nitroso—)

N—nitrososarcosine (sarcosine, N—nitroso—)

5—nitro—o—toluidine (benzenamine, 2—methyl—5—nitro--)

octamethylpyrophosphoramide

C diphosphoramide, octamethyl—)

osmium tetroxide (osmium (VIII) oxide)

7—oxabicyclo2.2.1heptane—2,3—dicarboxylic

acid

(endothal)

paraldehyde

(l,3,5—trioxane,

2,4,6—trimethyl—)

parathion

(phosphorothioic

acid, 0,0—diethyl O—(p—nitrophenyl)

ester)

pentachlorobenzene (benzene, pentachloro—)

pentachlorodibenzo—p—dioxins

pentachlorodibenzofurans

pentachloroethane (ethane, pentachloro—)

pentachloronitrobenzene

(PCNB)

(benzene, pentachioronitro—)

pentachlorophenol

(phenol, pentachioro—)

phenacetin

(acetamide, N—(4—ethoxyphenyl)—)

phenol (benzene, hydroxy—)

phenylenediamine (benzenediamine)

phenylmercury acetate

(mercury, acetatophenyl—)

N-phenyithiourea (thiourea, phenyl—)

phosgene (carbonyl chloride)

phosphine (hydrogen phosphide)

73.538

---

—65—

phosphorodithioic

acid, 0,O—diethyl

S—(ethylthio)methyl)

ester

(phorate)

phosphorothioic acid, O,0—dimethyi

O—p—(

(dimethylamino)sulfonyl)phenyl

ester

(famphur)

phthalic acid esters, N.O.S.

(benzene,

1,2—dicarboxylic

acid,

esters,

N.0.S.)

phthalic anhydride

(l,2—benzenedicarboxylic

acid

anhydride)

2—picoline

(pyridine,

2—methyl—)

polychiorinated biphenyl, N.O.S.

potassium

cyanide

potassium silver cyanide

(argentate(i—),

dicyano—,

potassium)

pro n am ide

(3,5—dichloro—N—(1,i—dimethyl—2—propynyl)benzamide)

1,3—propane sultone

(1,2—oxathiolane, 2,2—dioxide)

n—propylamine (1—propanamine)

propylthiouracil

(2,3—dihydro—6—propyl-2--thioxo—4(1H)—pyrimidinone)

2—propyn—l—ol

(propargyl

alcohol.)

pyridine

reserpine

(yohimban—l6—carboxylic acid,

1l,l7—dimethoxy—

18—(3,4,5—trimethoxybenzoyl)oxy—,

methyl ester)

resorcinol

(1,

3—benzenedioi)

saccharin and salts

(i,2—benzoisothiazolin—3—one, 1,1—dioxide, and salts)

safrole (benzené, l,2—methyienedioxy—4—allyl—)

selenious acid (selenium dioxide)

selenium and compounds, N.0.S.

selenium sulfide (sulfur

selenide)

selenourea (carbamimidoselenoic acid)

silver and compounds, N.0.S.

silver cyanide

sodium cyanide

streptozotocin

(D—glucopyranose,

2—deoxy—2—(3—niethyl—3—nitrosoureido)—)

strontium sulfide

strychnine

and

salts

(strychnidin—lO—one, and salts)

l,2,4,5—tetrachlorobenzene

(benzene,

1,2,4,5—tetrachioro—)

Tetrachlorodibenzo—p—dioxins

2,3,7 ,8—tetrachlorodibenzo—p—dioxin

(TCDD)

(dibenzo—p—dioxin,

2,3,7,8—tetrachioro—)

tetrachlorodibenzofurans

tetrachloroethane,

N.0.S.

(ethane,

tetrachioro—,

N.O.S.)

1,l,l,2—tetrachloroethane (ethane, l,1,l,2—tetrachloro—)

1,l,2,2—tetrachloroethane

(ethane, l,1,2,2—tetrachloro—)

tetrachioroethene (perchloroethylene)

tetrachloromethane (carbon tetrachioride)

2,3,4,6—tetrachlorophenol

(phenol, 2,3,4,6—tetrachloro—)

73.539

---

—66—

tetraethyldithiopyrophosphate

(dithiopyrophosphoric acid, tetraethyl ester)

tetraethyl

lead

(plumbane, tetraethyl—)

tetraethylpyrophosphate Cpyrophosphoric acid,

tetraethyl ester)

tetranitromethane

(methane, tetranitro—)

thallium and compounds, N.0.S.

thailic oxide

(thallium

(III)

oxide)

thallium

(I) acetate

(acetic acid, thallium (I) salt)

thallium

(I)

carbonate (carbonic acid, dithallium

(I)

salt)

thallium

(I)

chloride

thallium

(I)

nitrate

(nitric acid, thallium (I)

salt)

thallium selenite

thallium

(I)

sulfate

(sulfuric acid, thallium (I)

salt)

thioacetamide (ethanethioamide)

thiosemicarbazide (hydrazinecarbothioaniide)

thiourea

(carbamide, thio—)

thiuram (bis(dimethyithiocarbamoyl)

disulfide)

toluene (benzene, methyl—)

toiuenediamine

,

N.O.S.

(diaminotoluene N.O.S.)

2, 4—toluenediamine

2, 6—toluenediamine

3, 4—toluenediamine

toluene diisocyanate (benzene, 1,3—diisocyanatomethyi—)

o—toluidine hydrochloride

(benzeneamine,

2—methyl—,

hydrochloride)

toxaphene

(camphene,

octachloro—)

tribroinomethane (bromoform)

1,2, 4—trichlorobenzene (benzene,

1,2, 4—trichloro—)

l,1,l—trichloroethane

(methyl chloroform)

l,1,2—trichioroethane

(ethane, 1,1,2—trichloro—)

trichloroethene

(trichioroethylene)

trichioromethanethiol (methanethiol, trichloro—)

trichloromonofluoromethane (methane, trichlorofluoro—)

2,4,5—trichlorophenol (phenol,

2,4,5—trichloro—)

2,4,6—trichlorophenol

(phenol, 2,4,6—trichloro—)

2,4,5—trichlorophenoxyacetic acid

(2,4,5—T)

(acetic

acid,

2,4,5—trichlorophenoxy—)

2,4,5—trichlorophenoxypropionic acid (2,4,5—TP)

(silvex)

(propionic acid,

2—(2,4,5—trichlorophenoxy)—)

trichioropropane, N.O.S.

(propane, trichloro—, N.O.S.)

1, 2,3—trichloropropane

(propane, 1,2,3—trichloro—)

O,O,O—triethyl phosphorothioate

(phosphorothioic acid, 0,0,0—triethyl ester)

sym—tr

mi

trobenzene

Cbenzene, 1,3,5—trinitro—)

tris(1—aziridinyl) phosphine sulfide

Cphosphine sulfide, tris(l—aziridinyl)—)

tris(2,3—dibromopropyi) phosphate

Ci—propanol,

2,3—dibromo—, phosphate)

trypan blue

(2,7—naphthalenedisulfonic

acid,

3,3’—(3,3’—

dimethyl(i,l’—biphenyl)—4,4’—diyl)bis(azo)bis(5—

73.540

---

—67—

amino—4—hydroxy—, tetrasodium salt)

undecamethyienediamine, N,N’—bis(2—chlorobenzylamine),

dihydrochioride

(N,N’—undecamethylenebis)2—chlorobenzylamine),

dihydrochloride)

uracil

mustard

(uracil, 5—bis(2—chloroethyi)amino—)

vanadic acid, ammonium salt (ammonium vanadate)

vanadium pentoxide (vanadium

CV) oxide)

vinyl chloride (ethene, chioro—)

zinc cyanide

zinc phosphide

(Source:

Amended

at

10

Ill.

Reg.

effective

73-541

---

—68—

TITLE 35:

ENVIRONMENTAL PROTECTION

SUBTITLE G:

WASTE DISPOSAL

CHAPTER

I:

POLLUTION CONTROL BOARD

SUBCHAPTER

c:

HAZARDOUS WASTE OPERATING REQUIREMENTS

PART 722

STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE

SUBPART A:

GENERAL

Purpose, Scope and Applicability

Hazardous Waste Determination

USEPA Identification Numbers

SUBPART B:

THE MANIFEST

General Requirements

Acquisition of Manifests

Number

of

Copies

Use

of

the

Manifest

SUBPART C:

PRE-TRANSPORT REQUIREMENTS

Packaging

Labeling

Marking

Placard

ing

Accumulation

Time

SUBPART

D:

RECORDKEEPING AND REPORTING

Section

722.140

722.141

722

.

142

722.143

722.144

Recordkeeping

Annual

Reporting

Exception

Reporting

Additional

Reporting

Special Requirements for Generators of between 100

and

1000

kilograms

per

month

SUBPART

E:

SPECIAL CONDITIONS

Section

722. 150

722.151

Appendix A

International Shipments

Farmers

Form—Annual

Report

(EPA

Form

8700—13)

(Repealed)

AUTHORITY:

Implementing

Section

22.4

and authorized by Section

27 of the Environmental Protection Act

(Ill.

Rev.

Stat.

1985,

ch.

111 1/2, pars.

1022.4 and 1027).

Section

722.110

722.111

722.112

Section

722. 120

722.121

722.122

722.123

Section

722.130

722.131

722.132

722.133

722.134

73.542

---

—69—

SOURCE:

Adopted

in R8l—22,

43

PCB

427,

at

5 Iii. Reg. 9781,

effective as noted in 35

Ill. Adm. Code 700.106; amended and

codified

in RBl—22,

45 PCB 317, at

6

Ill. Reg.

4828, effective as

noted

in

35

Ill. Adm. Code 700.106; amended in R82—18,

Si PCB 31,

at

7

Ill.

Reg.

2518,

effective February 22, 1983;

amended

in R84—

9 at

9

Ill.

Reg. 11950, effective July 24,

1985; amended in R85—

22

at 10

Ill. Reg.

1131, effective January

2,

1986;

amended in

R86—l at

10

Ill. Reg. 14112, effective August 12,

1986;

amended

in R86—l9 at 10 Ill.

Reg.

,

effective

SUBPART

B:

THE MANIFEST

Section 722.120

General Requirements

a)

A generator who transports,

or offers for

transportation, hazardous waste

for off—site treatment,

storage or disposal must prepare

a manifest before

transporting the waste off—site.

b)

A generator must designated on the manifest one facility

which is permitted

to handle the waste described on the

manifest.

c)

A generator may also designate on the manifest one

alternate facility which is permitted

to handle his

waste

in the event an emergency prevents delivery of the

waste

to the primary designated facility.

d)

If the transporter

is unable

to deliver the hazardous

waste

to the designated facility or the alternate

facility, the generator must either designate another

facility or instruct the transporter

to return the

waste.

e)

The requirements of this Subpart do not apply

to

hazardous waste produced by generators of greater than

100 kg but less than 1000 kg

in

a calendar month where:

1)

The waste

is reclaimed under

a contractual

agreement pursuant to which:

A)

The type of waste

and frequency of shipments

are specified

in the agreement:

B)

The vehicle used

to transport the waste to the

recycling facility and

to deliver regenerated

material back to the generator

is owned and

operated by the reclaimer of the waste;

and

2)

The generator maintains

a copy of the reclamation

agreement

in his files

for

a period

of at least

three years after

termination or expiration of

the

agreement

*

73-543

---

—70—

(Source:

Amended at 10 Ill Reg.

,

effective

)

SUBPART

C:

PRE-TRANSPORT

REQUIREMENTS

Section

722.134

Accumulation

Time

a)

A Except as provided

in subsections (d),(e)

or

(f), a

generator may accumulate hazardous waste on—site for

90

days or less without a permit or without having interim

status provided that:

1)

The waste

is placed

in containers and the generator

complies with Subpart ~ of

35 Ill. Adm. Code

725.Subpart

I or the waste is placed

in tanks and

the generator complies with Subper~

a~

of

35 Ill.

Adm. Code 725.Subpart

J except 35

Ill.

Adm. Code

725. 293;

2)

The date upon which each period of accumulation

begins

is clearly marked and visible for inspection

on each container;

3)

While being accumulated on—site, each container and

tank is labeled or marked clearly with the words,

“Hazardous Waste”, and

4)

The generator complies with the requirements for

owners or operators in Subparts ?

and B in 35 Ill.

Adm.

Code 725.Subparts

C and D and with 35 Ill.

Adm. Code 725.116.

b)

A generator who accumulates hazardous waste

for more

than 90 days is an operator of a storage

facility and is

subject

to the requirements of

35 Ill. Adm. Code 724 and

725 and the permit requirements of 35

Ill.

Adm.

Code

702,

703 and

705

unless ~

the generator has been

granted an extension of the 90—day period.

Such

eitensien may be granted by the Agency iIf hazardous

wastes must remain on—site for longer than

90

days

due

to unforeseen, temporary, and uncontrollable

circumstances~,the generator may seek an extension of

up to 30 days by means of a variance or provisional

variance, pursuant to Section 37

of the Environmental

Protection Act.

An e~ctensienof up to ~G days may be

granted at the discretion of the Agency on a ease-by—

ease bes4e7

c)

1)

A generator may accumulate as much as

55 gallons of

hazardous waste

or one quart of acutely hazardous

waste listed

in 35 Ill. Adm. Code 721.133(e)

in

containers at or near any point of generation where

wastes initially accumulate, which is under

the

73.544

---

—71—

control

of

the

operator

of

the

process

generating

the

waste,

without

a

permit

or

interim

status

and

without complying with paragraph

(a) provided hethe

generator:

A)

Complies with 35

Ill. Adm. Code 725.271,

725.272 and 725.273(a); and

B)

marks 1~isthe generator’s containers either

with the words “Hazardous Waste” or with other

words that identify the contents of the

containers.

2)

A generator who accumulates either hazardous waste

or acutely hazardous waste listed in 35 Ill. Adm.

Code 721.133(e)

in excess of the amounts listed

in

peregraphsubsection

(c)(i)

at or near any point of

generation must, with respect to that amount of

excess waste, comply within three days with

paregrephsubsection

(a)

or other applicable

provisions of this chapter.

During the three day

period the generator must continue

to comply with

paragraphssubsection (c)(l).

The generator must

mark the container holding the excess accumulation

of hazardous waste with the date the excess amount

began accumulating.

d)

A generator who generates greater than 100 kilograms but

less than 1000 kilograms of hazardous waste

in

a

calendar month may accumulate hazardous waste on—site

for 180 days or less without

a permit or without having

interim status provided that:

1)

The quantity of waste accumulated on—site never

exceeds 6000 kilograms:

2)

The generator complies with the requirements of

subsection

(a)(i)

except the generator need not

comply with 35 Ill. Adm. Code 725.276:

3)

The generator complies with the requirements of

subsections

(a)(2)

and

(a)(3)

and the requirements

of

35 Ill.

Adni. Code 725.Subpart C; and

4)

The generator complies with the following

requirements:

A)

At all times there must be at least one

employee either on the premises or on call

(i.e.,

available

to

respond

to

an emergency by

reaching the facility within

a short period of

time) with the responsibility for coordinating

all emergency response measures specified

in

subsection

(d)(4)(D).

The employee is the

73.545

---

—72—

emergency coordinator.

B)

The generator shall post the following

information next

to the telephone:

i)

The name and telephone number of the

emergency coordinator:

ii)

Location of fire extinguishers and spill