TITLE 35: ENVIRONMENTAL PROTECTION | |
SUBTITLE G: WASTE DISPOSAL | |
CHAPTER I: POLLUTION CONTROL BOARD | |
SUBCHAPTER i: SOLID WASTE AND SPECIAL WASTE HAULING |
PART 807 | |
SOLID WASTE |
SUBPART A: GENERAL PROVISIONS |
Section |
807.101 | Authority, Policy and Purposes |
807.102 | Repeals |
807.103 | Severability |
807.104 | Definitions |
807.105 | Relation to Other Rules |
SUBPART B: SOLID WASTE PERMITS |
Section |
807.201 | Development Permits |
807.202 | Operating Permits |
807.203 | Experimental Permits |
807.204 | Former Authorization |
807.205 | Applications for Permit |
807.206 | Permit Conditions |
807.207 | Standards for Issuance |
807.208 | Permit No Defense |
807.209 | Permit Revision |
807.210 | Supplemental Permits |
807.211 | Transfer of Permits |
807.212 | Permit Revocation |
807.213 | Design, Operation and Maintenance Criteria |
807.214 | Revised Cost Estimates |
SUBPART C: SANITARY LANDFILLS |
Section |
807.301 | Prohibition |
807.302 | Compliance with Permit |
807.303 | Methods of Operation |
807.304 | Equipment, Personnel and Supervision |
807.305 | Cover |
807.306 | Litter |
807.307 | Salvaging |
807.308 | Scavenging |
807.309 | Animal Feeding |
807.310 | Special Wastes |
807.311 | Open Burning |
807.312 | Air Pollution |
807.313 | Water Pollution |
807.314 | Standard Requirements |
807.315 | Protection of Waters of the State |
807.316 | Application |
807.317 | Operating Records |
807.318 | Completion or Closure Requirements |
SUBPART E: CLOSURE AND POST-CLOSURE CARE |
Section |
807.501 | Purpose, Scope and Applicability |
807.502 | Closure Performance Standard |
807.503 | Closure Plan |
807.504 | Amendment of Closure Plan |
807.505 | Notice of Closure and Final Amendment to Plan |
807.506 | Initiation of Closure |
807.507 | Partial Closure |
807.508 | Certification of Closure |
807.509 | Use of Waste Following Closure |
807.523 | Post-closure Care Plan |
807.524 | Implementation and Completion of Post-closure Care Plan |
SUBPART F: FINANCIAL ASSURANCE FOR CLOSURE AND POST-CLOSURE CARE |
Section |
807.600 | Purpose, Scope and Applicability |
807.601 | Requirement to Obtain Financial Assurance |
807.602 | Time for Submission of Financial Assurance |
807.603 | Upgrading Financial Assurance |
807.604 | Release of Financial Institution |
807.605 | Application of Proceeds and Appeal |
807.606 | Release of the Operator |
807.620 | Current Cost Estimate |
807.621 | Cost Estimate for Closure |
807.622 | Cost Estimate for Post-closure Care |
807.623 | Biennial Revision of Cost Estimate |
807.624 | Interim Formula for Cost Estimate |
807.640 | Mechanisms for Financial Assurance |
807.641 | Use of Multiple Financial Mechanisms |
807.642 | Use of Financial Mechanism for Multiple Sites |
807.643 | Trust Fund for Unrelated Sites |
807.644 | RCRA Financial Assurance |
807.661 | Trust Fund |
807.662 | Surety Bond Guaranteeing Payment |
807.663 | Surety Bond Guaranteeing Performance |
807.664 | Letter of Credit |
807.665 | Closure Insurance |
807.666 | Self-insurance for Non-Commercial Sites |
SUBPART G: SITE-SPECIFIC RULES AND EXCEPTIONS NOT OF GENERAL APPLICABILITY |
Section | |
807.700 | Cretex Pressure Pipe, Inc. Concrete Waste Disposal Site |
807.APPENDIX A | Financial Assurance Forms |
807.ILLUSTRATION A | Trust Agreement | ||||
807.ILLUSTRATION B | Certificate of Acknowledgment | ||||
807.ILLUSTRATION C | Forfeiture Bond | ||||
807.ILLUSTRATION D | Performance Bond | ||||
807.ILLUSTRATION E | Irrevocable Standby Letter of Credit | ||||
807.ILLUSTRATION F | Certificate of Insurance for Closure and/or Post-closure Care | ||||
807.ILLUSTRATION G | Owner's or Operator's Bond Without Surety | ||||
807.ILLUSTRATION H | Owner's or Operator's Bond With Parent Surety | ||||
807.ILLUSTRATION I | Letter from Chief Financial Officer |
807.APPENDIX B | |
Old Rule Numbers Referenced |
"Abandonment" means the failure to initiate closure within 30 days after receipt of the "final volume of waste". | |
"Bedrock" means the solid rock exposed at the surface of the earth or overlain by unconsolidated material. | |
"Cell" means compacted refuse completely enclosed by cover material. | |
"Compaction" means the reduction of volume of material under load. Compaction is a "treatment". | |
"Cover material" means soil or other material that is used to cover compacted solid waste in a sanitary landfill and that is free of objects that would hinder compaction and free of content that would be conducive to vector harborage, feeding or breeding. | |
"Development" means construction or installation of a unit. | |
"Disposal" means the discharge, deposit, injection, dumping, spilling, leaking or placing of any waste into or on any land or water or into any well so that such waste or any constituent thereof may enter the environment or be emitted into the air or discharged into any waters, including groundwater. As used in this Part, "disposal" includes methods of storage or treatment in which there is no certain plan to remove wastes or waste residues from the storage or treatment unit to another unit for ultimate disposal. | |
"Facility", as used in this Part, means the same thing as "unit". | |
"Final volume of waste" means the last quantity of waste received by the operator at the site. A quantity of waste is assumed to be the final volume if the operator receives no additional waste within 30 days after receiving that quantity, unless the operator demonstrates that the operator expects additional waste. Waste arriving at the site for disposal in a manner which is not controlled by the operator does not affect the determination of when the final volume of waste was received by the operator. | |
"Groundwater" means water occurring in the zone of saturation in any aquifer or soil. | |
"Hazardous waste" is as defined in 35 Ill. Adm. Code 721. | |
"Indefinite storage" means "treatment" or "storage" in such a manner that a person would face technical difficulties or high costs in removing the wastes or waste residues from the treatment or storage unit to a disposal unit, so that it may become necessary to close the treatment or storage unit as a disposal unit. A treatment or storage unit in which wastes or waste residues remain for more than one year is assumed to be "indefinite storage" unless the operator demonstrates that it will be technically feasible and economically reasonable to remove the waste for ultimate disposal prior to or upon closure. | |
"Leachate" means liquid containing materials removed from solid waste. | |
"Lift" means an accumulation of refuse which is compacted into a cell and over which compacted cover is placed. | |
"Modification" means any physical change, or change in the method of operation, of a solid waste management unit. For purposes of permits issued pursuant to this Part, the Agency may specify conditions under which a solid waste management unit may be operated without causing a modification as herein defined. | |
"Operator" means a person who conducts a waste treatment, waste storage or waste disposal operation. | |
"Owner" means a person who has an interest, directly or indirectly, in land, including a leasehold interest, on which a person conducts a waste treatment, waste storage or waste disposal operation. The "owner" is the "operator" if there is no other person who is conducting a waste treatment, waste storage or waste disposal operation. | |
"Permeability" means the capability of a material to pass a fluid. | |
"Professional Engineer" means an engineer registered to practice engineering in the State of Illinois. | |
"Refuse" means waste. | |
"Salvaging" means the return of waste materials to beneficial use. | |
"Scavenging" means the removal of materials from a solid waste management unit in a manner not in conformity with the regulations governing salvaging. | |
"Site" means any location, place or tract of land used for waste management. A site may include one or more units. | |
"Solid waste" means waste. | |
"Solid waste management" means "waste management". | |
"Storage" means the containment of waste, either on a temporary basis or for a period of years, in such a manner as not to constitute disposal of such waste. | |
"Surface water" means all water the surface of which is exposed to the atmosphere. | |
"Treatment" means any method, technique or process designed to change the physical, chemical or biological character or composition of any waste so as to neutralize such waste or so as to render such waste safer for transport, amenable for storage or reduced in volume. | |
"Unit" means any device, mechanism, equipment or area used for storage, treatment or disposal of waste. | |
"Vector" means any living agent, other than human, capable of transmitting, directly or indirectly, an infectious disease. | |
"WASTE" MEANS ANY GARBAGE, SLUDGE FROM A WASTE TREATMENT PLANT, WATER SUPPLY TREATMENT PLANT, OR AIR POLLUTION CONTROL FACILITY OR OTHER DISCARDED MATERIAL, INCLUDING SOLID, LIQUID, SEMI-SOLID, OR CONTAINED GASEOUS MATERIAL RESULTING FROM INDUSTRIAL, COMMERCIAL, MINING AND AGRICULTURAL OPERATIONS, OR FROM COMMUNITY ACTIVITIES, BUT DOES NOT INCLUDE SOLID OR DISSOLVED MATERIALS IN DOMESTIC SEWAGE, OR SOLID OR DISSOLVED MATERIALS IN IRRIGATION RETURN FLOWS OR INDUSTRIAL DISCHARGES WHICH ARE POINT SOURCES SUBJECT TO PERMITS UNDER 35 ILL. ADM. CODE 309.102 OR SOURCE, SPECIAL NUCLEAR, OR BY-PRODUCT MATERIALS AS DEFINED BY THE ATOMIC ENERGY ACT OF 1954, AS AMENDED (42 U.S.C.A. 2011 et seq.) OR ANY SOLID OR DISSOLVED MATERIAL FROM ANY FACILITY SUBJECT TO THE FEDERAL SURFACE MINING CONTROL AND RECLAMATION ACT OF 1977 (P.L. 95-87) OR THE RULES AND REGULATIONS THEREUNDER (Ill. Rev. Stat. 1983 ch. 96 1/2, par. 7901.01 et seq. and 62 Ill. Adm. Code 1700 through 1845) (Section 3 (11) of the Act). | |
"Waste management" means the process of storage, treatment or disposal of waste, not including hauling or transport. | |
"Water table" means that surface in unconfined water at which the pressure is atmospheric and is defined by the levels at which water stands in wells that penetrate the water just far enough to hold standing water. | |
"Working face" means any part of a sanitary landfill where waste is being disposed. |
CE | =
|
Current cost estimate |
Y | =
|
Current value of the trust fund |
=
|
Number of years remaining in the pay in period. |
Attest: | |
Signature of Grantor | |
Typed Name | |
Title | |
Seal | |
Attest: | |
Signature of Trustee | |
Typed Name | |
Title | |
Seal |
State of _____________ | ) |
) SS | |
County of ___________ | ) |
________________________ | |
Notary Public |
Date bond executed: |
Effective date: |
Principal: | |
Type of organization: |
State of incorporation: |
Surety: |
Sites: |
Name |
Address |
City |
Amount guaranteed by this bond: | $ |
Name |
Address |
City |
Amount guaranteed by this bond: | $ |
Please attach a separate page if more space is needed for all sites. |
Total penal sum of bond: | $ |
Surety's bond number: |
Principal | Corporate Surety | |
Signature | Name | |
Typed Name | Address | |
Title | State of Incorporation | |
Date | Signature | |
Typed Name | ||
Title | ||
Corporate seal | Corporate seal | |
Bond premium: | $ |
Date bond executed: |
Effective date: |
Principal: | |
Type of organization: |
State of incorporation: |
Surety: |
Sites: |
Name |
Address |
City |
Amount guaranteed by this bond: | $ |
Name |
Address |
City |
Amount guaranteed by this bond: | $ |
Please attach a separate page if more space is needed for all sites. |
Total penal sum of bond: | $ |
Surety's bond number: |
Principal | Corporate Surety | |
Signature | Name | |
Typed Name | Address | |
Title | State of Incorporation | |
Date | Signature | |
Typed Name | ||
Title | ||
Corporate seal | Corporate seal | |
Bond premium: | $ |
Signature |
Typed Name |
Title | |
Date |
Name and address of issuing institution |
Name and Address of Insurer ("Insurer"): |
Name and Address of Insured ("Insured"): |
Sites Covered: |
Name |
Address |
City |
Amount insured for this site: | $ |
Name |
Address |
City |
Amount insured for this site: | $ |
Please attach a separate page if more space is needed for all sites. |
Face Amount |
Policy Number |
Effective Date |
Typed Name | |
Title | |
Date | |
Date bond executed: |
Effective date: |
Owner or Operator: |
Owner's or Operator's address: | |
Site: |
Site address: | |
Penal sum: | $ |
Owner or Operator |
Signature |
Typed Name |
Title |
Date |
Corporate Seal |
Date bond executed: |
Effective Date: |
Surety: |
Surety's address: |
Owner or Operator: |
Owner or Operator's address: |
Site: |
Site address: |
Penal sum: | $ |
Owner or Operator | Surety | |
Signature | Name | |
Typed Name | Address | |
Title | State of Incorporation | |
Date | Signature | |
Typed Name | ||
Title | ||
Corporate seal | Corporate seal | |
1. Gross revenue of the firm | $_______________________ |
2. Gross revenue from waste disposal operations | $_______________________ |
3. Line 2 divided by line 3 | _______________________ |
1. Sum of current cost estimates (total of all cost estimates shown in paragraphs above) | $_______________________ |
2. Total liabilities (if any portion of the cost estimates is included in total liabilities, you may deduct the amount of that portion from this line and add that amount to lines 3 and 4) | $_______________________ |
3. Tangible net worth | $_______________________ |
4. Net worth | $_______________________ |
5. Current assets | $_______________________ |
6. Current liabilities | $_______________________ |
7. Net working capital (line 5 minus line 6) | $_______________________ |
8. The sum of net income plus depreciation, depletion, and amortization | $_______________________ |
9. Total assets in U.S. (required only if less than 90% of firm's assets are located in the U.S | $_______________________ |
Yes | No | |
10. Is line 3 at least $10 million | ________ | ________ |
________ | ________ | |
11. Is line 3 at least 6 times line 1? | ________ | ________ |
________ | ________ | |
12. Is line 7 at least 6 times line 1? | ________ | ________ |
________ | ________ | |
13. Are at least 90% of firm's assets located in the U.S.? If not, complete line 14. | ________ | ________ |
________ | ________ | |
14. Is line 9 at least 6 times line 1? | ________ | ________ |
________ | ________ | |
15. Is line 2 divided by line 4 less than 2.0? | ________ | ________ |
________ | ________ | |
16. Is line 8 divided by line 2 greater than 0.1? | ________ | ________ |
________ | ________ | |
17. Is line 5 divided by line 6 greater than 1.5? | ________ | ________ |
1. Sum of current cost estimates (total of all cost estimates shown in paragraphs above) | $_______________________ |
2. Current bond rating of most recent issuance of this firm and name of rating service | _______________________ |
3. Date of issuance of bond | _______________________ |
4. Date of maturity of bond | _______________________ |
5. Tangible net worth (if any portion of the closure and post-closure cost estimates is included in "total liabilities" on your firm's financial statements, you may add the amount of that portion to this line) | $_______________________ |
6. Total assets in U.S. (required only if less than 90% of firm's assets are located in the U.S.) | $_______________________ |
|
Yes | No |
7. Is line 5 at least $10 million? | ________ | ________ |
________ | ________ | |
8. Is line 5 at least 6 times line 1? | ________ | ________ |
________ | ________ | |
9. Are at least 90% of firm's assets located in the U.S.? If not complete line 10. | ________ | ________ |
________ | ________ | |
10. Is line 6 at least 6 time line 1? | ________ | ________ |
Chapter 7: Solid Waste | 35 Ill. Adm. Code 807 |
Rule 101 | Section 807.101 |
Rule 102 | Section 807.102 |
Rule 103 | Section 807.103 |
Rule 104 | Section 807.104 |
Rule 201 | Section 807.201 |
Rule 202 | Section 807.202 |
Rule 203 | Section 807.203 |
Rule 204 | Section 807.204 |
Rule 205 | Section 807.205 |
Rule 206 | Section 807.206 |
Rule 207 | Section 807.207 |
Rule 208 | Section 807.208 |
Rule 209 | Section 807.209 |
Rule 210 | Section 807.210 |
Rule 211 | Section 807.211 |
Rule 212 | Section 807.212 |
Rule 213 | Section 807.213 |
Rule 301 | Section 807.301 |
Rule 302 | Section 807.302 |
Rule 303 | Section 807.303 |
Rule 304 | Section 807.304 |
Rule 305 | Section 807.305 |
Rule 306 | Section 807.306 |
Rule 307 | Section 807.307 |
Rule 308 | Section 807.308 |
Rule 309 | Section 807.309 |
Rule 310 | Section 807.310 |
Rule 311 | Section 807.311 |
Rule 312 | Section 807.312 |
Rule 313 | Section 807.313 |
Rule 314 | Section 807.314 |
Rule 315 | Section 807.315 |
Rule 316 | Section 807.316 |
Rule 317 | Section 807.317 |
Rule 318 | Section 807.318 |