JCAR350721-0805030r01
1
?
TITLE 35: ENVIRONMENTAL PROTECTION
2
?
SUBTITLE G: WASTE DISPOSAL
3
?
CHAPTER I: POLLUTION CONTROL BOARD
4
?
SUBCHAPTER c: HAZARDOUS WASTE OPERATING REQUIREMENTS
5
6?
PART 721
7?
IDENTIFICATION AND LISTING OF HAZARDOUS WASTE
8
9?
SUBPART A: GENERAL PROVISIONS
10
11
?
Section
12?
721.101?
Purpose and Scope
13
?
721.102?
Definition of Solid Waste
14?
721.103?
Definition of Hazardous Waste
15
?
721.104?
Exclusions
16 721.105?
Special Requirements for Hazardous Waste Generated by Small Quantity
17?
Generators
18
?
721.106?
Requirements for Recyclable Materials
19 721.107?
Residues of Hazardous Waste in Empty Containers
20 721.108
?
PCB Wastes Regulated under TSCA
21?
721.109
?
Requirements for Universal Waste
22
23?
SUBPART B: CRITERIA FOR IDENTIFYING THE
24?
CHARACTERISTICS OF HAZARDOUS WASTE
25
?
AND FOR LISTING HAZARDOUS WASTES
26
27?
Section
28
?
721.110
?
Criteria for Identifying the Characteristics of Hazardous Waste
29?
721.111
?
Criteria for Listing Hazardous Waste
30
31
?
SUBPART C: CHARACTERISTICS OF HAZARDOUS WASTE
32
33
?
Section
34?
721.120
?
General
35?
721.121?
Characteristic of Ignitability
36?
721.122?
Characteristic of Corrosivity
37?
721.123?
Characteristic of Reactivity
38?
721.124?
Toxicity Characteristic
39
40?
SUBPART D: LISTS OF HAZARDOUS WASTE
41
42?
Section
43?
721.130
?
General
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
JCAR350721-0805030r01
721.131
Hazardous Wastes from Nonspecific Sources
721.132
Hazardous Waste from Specific Sources
721.133
Discarded Commercial Chemical Products, Off-Specification Species, Container
Residues, and Spill Residues Thereof
721.135
Wood Preserving Wastes
SUBPART E: EXCLUSIONS AND EXEMPTIONS
Comparable or Syngas Fuel Exclusion
Conditional Exclusion for Used, Broken CRTs and Processed CRT Glass
Undergoing Recycling
Conditional Exclusion for Used, Intact CRTs Exported for Recycling
Notification and Recordkeeping for Used, Intact CRTs Exported for Reuse
Section
721.138
721.139
721.140
721.141
721.APPENDIX A
721.APPENDIX B
721.APPENDIX C
721.TABLE A
721.TABLE B
721.TABLE C
721.APPENDIX G
721.APPENDIX H
721.APPENDIX I
721.TABLE A
721.TABLE B
721.TABLE C
721.TABLE D
721.APPENDIX J
721.APPENDIX Y
721.APPENDIX Z
Representative Sampling Methods
Method 1311 Toxicity Characteristic Leaching Procedure (TCLP)
Chemical Analysis Test Methods
Analytical Characteristics of Organic Chemicals (Repealed)
Analytical Characteristics of Inorganic Species (Repealed)
Sample Preparation/Sample Introduction Techniques (Repealed)
Basis for Listing Hazardous Wastes
Hazardous Constituents
Wastes Excluded by Administrative Action
Wastes Excluded by USEPA pursuant to 40 CFR 260.20 and 260.22
from Non-Specific Sources
Wastes Excluded by USEPA pursuant to 40 CFR 260.20 and 260.22
from Specific Sources
Wastes Excluded by USEPA pursuant to 40 CFR 260.20 and 260.22
from Commercial Chemical Products, Off-Specification Species,
Container Residues, and Soil Residues Thereof
Wastes Excluded by the Board by Adjusted Standard
Method of Analysis for Chlorinated Dibenzo-p-Dioxins and
Dibenzofurans (Repealed)
Table to Section 721.138
Table to Section 721.102
AUTHORITY: Implementing Sections 7.2 and 22.4 and authorized by Section 27 of the
Environmental Protection Act [415 ILCS 5/7.2, 22.4 and 27].
SOURCE: Adopted in R81-22 at 5 Ill. Reg. 9781, effective May 17, 1982; amended and
codified in R81-22 at 6 Ill. Reg. 4828, effective May 17, 1982; amended in R82-18 at 7 Ill. Reg.
2518, effective February 22, 1983; amended in R82-19 at 7 Ill. Reg. 13999, effective October 12,
1983; amended in R84-34, 61 at 8 Ill. Reg. 24562, effective December 11, 1984; amended in
JCAR350721-0805030r01
87
R84-9 at 9 III. Reg. 11834, effective July 24, 1985; amended in R85-22 at 10 Ill. Reg. 998,
88
effective January 2, 1986; amended in R85-2 at 10 Ill. Reg. 8112, effective May 2, 1986;
89
amended in R86-1 at 10 Ill. Reg. 14002, effective August 12, 1986; amended in R86-19 at 10 Ill.
90
Reg. 20647, effective December 2, 1986; amended in R86-28 at 11 Ill. Reg. 6035, effective
91
March 24, 1987; amended in R86-46 at 11 Ill. Reg. 13466, effective August 4, 1987; amended in
92
R87-32 at 11 Ill. Reg. 16698, effective September 30, 1987; amended in R87-5 at 11 Ill. Reg.
93
19303, effective November 12, 1987; amended in R87-26 at 12 III. Reg. 2456, effective January
94
15, 1988; amended in R87-30 at 12 Ill. Reg. 12070, effective July 12, 1988; amended in R87-39
95
at 12 III. Reg. 13006, effective July 29, 1988; amended in R88-16 at 13 Ill. Reg. 382, effective
96
December 27, 1988; amended in R89-1 at 13 Ill. Reg. 18300, effective November 13, 1989;
97
amended in R90-2 at 14 Ill. Reg. 14401, effective August 22, 1990; amended in R90-10 at 14 Ill.
98
Reg. 16472, effective September 25, 1990; amended in R90-17 at 15 III. Reg. 7950, effective
99
May 9, 1991; amended in R90-11 at 15 111. Reg. 9332, effective June 17, 1991; amended in R91-
100
1 at 15 Ill. Reg. 14473, effective September 30, 1991; amended in R91-12 at 16 Ill. Reg. 2155,
101
effective January 27, 1992; amended in R91-26 at 16 III. Reg. 2600, effective February 3, 1992;
102
amended in R91-13 at 16 Ill. Reg. 9519, effective June 9, 1992; amended in R92-1 at 16 Ill. Reg.
103
17666, effective November 6, 1992; amended in R92-10 at 17 Ill. Reg. 5650, effective March 26,
104
1993; amended in R93-4 at 17 III. Reg. 20568, effective November 22, 1993; amended in R93-
105
16 at 18 Ill. Reg. 6741, effective April 26, 1994; amended in R94-7 at 18 Ill. Reg. 12175,
106
effective July 29, 1994; amended in R94-17 at 18 Ill. Reg. 17490, effective November 23, 1994;
107
amended in R95-6 at 19 Ill. Reg. 9522, effective June 27, 1995; amended in R95-20 at 20 Ill.
108
Reg. 10963, effective August 1, 1996; amended in R96-10/R97-3/R97-5 at 22 Ill. Reg. 275,
109
effective December 16, 1997; amended in R98-12 at 22 Ill. Reg. 7615, effective April 15, 1998;
110
amended in R97-21/R98-3/R98-5 at 22 Ill. Reg. 17531, effective September 28, 1998; amended
111
in R98-21/R99-2/R99-7 at 23 Ill. Reg. 1718, effective January 19, 1999; amended in R99-15 at
112
23 Ill. Reg. 9135, effective July 26, 1999; amended in R00-13 at 24 Ill. Reg. 9481, effective June
113
20, 2000; amended in R01-3 at 25 Ill. Reg. 1281, effective January 11, 2001; amended in R01-
114
21/R01-23 at 25 Ill. Reg. 9108, effective July 9, 2001; amended in R02-1/R02-12/R02-17 at 26
115
Ill. Reg. 6584, effective April 22, 2002; amended in R03-18 at 27 Ill. Reg. 12760, effective July
116
17, 2003; amended in R04-16 at 28 III. Reg. 10693, effective July 19, 2004; amended in R05-8 at
117
29 Ill. Reg. 6003, effective April 13, 2005; amended in R06-5/R06-6/R06-7 at 30 Ill. Reg. 2992,
118
effective February 23, 2006; amended in R06-16/R06-17/R06-18 at 31 Ill. Reg. 791, effective
119
December 20, 2006; amended in R07-5/R07-14 at 32 III. Reg.
, effective
120
121
SUBPART A: GENERAL PROVISIONS
122
123
Section
721.103
Definition of Hazardous Waste
124
125
a)
A solid waste, as defined in Section 721.102, is a hazardous waste if the following
126
is true of the waste:
127
128
1)
It is not excluded from regulation as a hazardous waste pursuant to Section
129
721.104(b); and
JCAR350721-0805030r01
130
131
2)
It meets any of the following criteria:
132
133
A)
It exhibits any of the characteristics of hazardous waste identified
134
in Subpart C of this Part. However, any mixture of a waste from
135
the extraction, beneficiation, and processing of ores and minerals
136
excluded pursuant to Section 721.104(b)(7) and any other solid
137
waste exhibiting a characteristic of hazardous waste pursuant to
138
Subpart C of this Part is a hazardous waste only if it exhibits a
139
characteristic that would not have been exhibited by the excluded
140
waste alone if such mixture had not occurred, or if the mixture
141
continues to exhibit any of the characteristics exhibited by the non-
142
excluded wastes prior to mixture. Further, for the purposes of
143
applying the toxicity characteristic to such mixtures, the mixture is
144
also a hazardous waste if it exceeds the maximum concentration
145
for any contaminant listed in Section 721.124 that would not have
146
been exceeded by the excluded waste alone if the mixture had not
147
occurred or if it continues to exceed the maximum concentration
148
for any contaminant exceeded by the nonexempt waste prior to
149
mixture.
150
151
B)
It is listed in Subpart D of this Part and has not been excluded from
152
the lists in Subpart D of this Part pursuant to 35 III. Adm. Code
153
720.120 and 720.122.
154
155
C)
This subsection (a)(2)(B) corresponds with 40 CFR
156
261.3(a)(2)(iii), which USEPA removed and marked as "reserved"
157
at 66 Fed. Reg. 27266 (May 16, 2001). This statement maintains
158
structural consistency with the federal regulations.
159
160
D)
It is a mixture of solid waste and one or more hazardous wastes
161
listed in Subpart D of this Part and has not been excluded from this
162
subsection (a)(2) pursuant to 35 Ill. Adm. Code 720.120 and
163
720.122, subsection (g) of this Section, or subsection (h) of this
164
Section; however, the following mixtures of solid wastes and
165
hazardous wastes listed in Subpart D of this Part are not hazardous
166
wastes (except by application of subsection (a)(2)(A) or (a)(2)(B)
167
of this Section) if the generator demonstrates that the mixture
168
consists of wastewater the discharge of which is subject to
169
regulation under either 35 III. Adm. Code 309 or 310 (including
170
wastewater at facilities that have eliminated the discharge of
171
wastewater) and the following is true of the waste:
172
JCAR350721-0805030r01
173
It is one or more of the following solvents listed in Section
174
721.131: benzene, carbon tetrachloride,
175
tetrachloroethylene, trichloroethylene or the scrubber
176
waters derived from the combustion of these spent solvents,
177
provided that the maximum total weekly usage of these
178
solvents (other than the amounts that can be demonstrated
179
not to be discharged to wastewater) divided by the average
180
weekly flow of wastewater into the headworks of the
181
facility's wastewater treatment or pretreatment system does
182
not exceed 1 part per million, or the total measured
183
concentration of these solvents entering the headworks of
184
the facility's wastewater treatment system (at a facility that
185
is subject to regulation under the federal Clean Air Act new
186
source performance standards or national emission
187
standards for hazardous air pollutants of 40 CFR 60, 61, or
188
63 or at a facility that is subject to an enforceable limit in a
189
federal operating permit that minimizes fugitive emissions)
190
does not exceed 1 part per million on an average weekly
191
basis. Any facility that uses benzene as a solvent and
192
claims this exemption must use an aerated biological
193
wastewater treatment system and must use only lined
194
surface impoundments or tanks prior to secondary
195
clarification in the wastewater treatment system. A facility
196
that chooses to measure concentration levels must file a
197
copy of its sampling and analysis plan with the Agency. A
198
facility must file a copy of a revised sampling and analysis
199
plan only if the initial plan is rendered inaccurate by
200
changes in the facility's operations. The sampling and
201
analysis plan must include the monitoring point location
202
(headworks), the sampling frequency and methodology,
203
and a list of constituents to be monitored. A facility is
204
eligible for the direct monitoring option once it receives
205
confirmation that the sampling and analysis plan has been
206
received by the Agency. The Agency must reject the
207
sampling and analysis plan if it determines that the
208
sampling and analysis plan fails to include the information
209
required by this subsection (a)(2)(D)(i) or that the plan
210
parameters would not enable the facility to calculate the
211
weekly average concentration of these chemicals
212
accurately. If the Agency rejects the sampling and analysis
213
plan, or if the Agency determines that the facility is not
214
following the sampling and analysis plan, the Agency must
215
notify the facility to cease the use of the direct monitoring
JCAR350721-0805030r01
216
option until such time as the bases for rejection are
217
corrected;
218
219
It is one or more of the following spent solvents listed in
220
Section 721.131: methylene chloride, 1,1,1-
221
trichloroethane, chlorobenzene, o-dichlorobenzene, cresols,
222
cresylic acid, nitrobenzene, toluene, methyl ethyl ketone,
223
carbon disulfide, isobutanol, pyridine, spent
224
chlorofluorocarbon solvents, 2-ethoxyethanol, or the
225
scrubber waters derived-from the combustion of these spent
226
solvents, provided that the maximum total weekly usage of
227
these solvents (other than the amounts that can be
228
demonstrated not to be discharged to wastewater) divided
229
by the average weekly flow of wastewater into the
230
headworks of the facility's wastewater treatment or
231
pretreatment system does not exceed 25 parts per million,
232
or the total measured concentration of these solvents
233
entering the headworks of the facility's wastewater
234
treatment system (at a facility that is subject to regulation
235
under the federal Clean Air Act new source performance
236
standards or national emission standards for hazardous air
237
pollutants of 40 CFR 60, 61, or 63 or at a facility that is
238
subject to an enforceable limit in a federal operating permit
239
that minimizes fugitive emissions) does not exceed 25 parts
240
per million on an average weekly basis. A facility that
241
chooses to measure concentration levels must file a copy of
242
its sampling and analysis plan with the Agency. A facility
243
must file a copy of a revised sampling and analysis plan
244
only if the initial plan is rendered inaccurate by changes in
245
the facility's operations. The sampling and analysis plan
246
must include the monitoring point location (headworks),
247
the sampling frequency and methodology, and a list of
248
constituents to be monitored. A facility is eligible for the
249
direct monitoring option once it receives confirmation that
250
the sampling and analysis plan has been received by the
251
Agency. The Agency must reject the sampling and analysis
252
plan if it determines that the sampling and analysis plan
253
fails to include the information required by this subsection
254
(a)(2)(D)(ii) or that the plan parameters would not enable
255
the facility to calculate the weekly average concentration of
256
these chemicals accurately. If the Agency rejects the
257
sampling and analysis plan, or if the Agency determines
258
that the facility is not following the sampling and analysis
JCAR350721-0805030r01
259
plan, the Agency must notify the facility to cease the use of
260
the direct monitoring option until such time as the bases for
261
rejection are corrected;
262
263
iii)
It is one of the following wastes listed in Section 721.132,
264
provided that the wastes are discharged to the refinery oil
265
recovery sewer before primary oil/water/solids separation:
266
heat exchanger bundle cleaning sludge from the petroleum
267
refining industry (USEPA hazardous waste no. K050),
268
crude oil storage tank sediment from petroleum refining
269
operations (USEPA hazardous waste number K169),
270
clarified slurry oil tank sediment or in-line filter/separation
271
solids from petroleum refining operations (USEPA
272
hazardous waste number K170), spent hydrotreating
273
catalyst (USEPA hazardous waste number K171), and
274
spent hydrorefining catalyst (USEPA hazardous waste
275
number K172);
276
277
iv)
It is a discarded hazardous waste, commercial chemical
278
product or chemical intermediate listed in Section 721.121,
279
721.132, or 721.133 arising from de minimis losses of these
280
materials. For purposes of this subsection (a)(2)(D)(iv),
281
"de minimis" losses are inadvertent releases to a wastewater
282
treatment system, including those from normal material
283
handling operations (e.g., spills from the unloading or
284
transfer of materials from bins or other containers, leaks
285
from pipes, valves, or other devices used to transfer
286
materials); minor leaks of process equipment, storage tanks,
287
or containers; leaks from well-maintained pump packings
288
and seals; sample purgings; relief device discharges;
289
discharges from safety showers and rinsing and cleaning of
290
personal safety equipment; and rinsate from empty
291
containers or from containers that are rendered empty by
292
that rinsing. Any manufacturing facility that claims an
293
exemption for de minimis quantities of a waste listed in
294
Section 721.131 or 721.132, or any nonmanufacturing
295
facility that claims an exemption for de minimis quantities
296
of wastes listed in Subpart D of this Part, must either have
297
eliminated the discharge of wastewaters or have included in
298
its federal Clean Water Act (33 USC 1251 et seq.) permit
299
application or wastewater pretreatment submission to the
300
Agency or the wastewater pretreatment Control Authority
301
pursuant to 35 III. Adm. Code 307 of the constituents for
JCAR350721-0805030r01
302
which each waste was listed (in Appendix G of this Part);
303
and the constituents in Table T to 35 Ill. Adm. Code 728
304
for which each waste has a treatment standard (i.e., land
305
disposal restriction constituents). A facility is eligible to
306
claim the exemption once the Agency or Control Authority
307
has been notified of possible de minimis releases via the
308
Clean Water Act permit application or the wastewater
309
pretreatment submission. A copy of the Clean Water Act
310
permit application or the wastewater pretreatment
311
submission must be placed in the facility's on-site files;
312
313
v)
It is wastewater resulting from laboratory operations
314
containing toxic (T) wastes listed in Subpart D of this Part,
315
provided that the annualized average flow of laboratory
316
wastewater does not exceed one percent of total wastewater
317
flow into the headworks of the facility's wastewater
318
treatment or pretreatment system or provided that the
319
wastes' combined annualized average concentration does
320
not exceed one part per million in the headworks of the
321
facility's wastewater treatment or pretreatment facility.
322
Toxic (T) wastes used in laboratories that are demonstrated
323
not to be discharged to wastewater are not to be included in
324
this calculation;
325
326
It is one or more of the following wastes listed in Section
327
721.132: wastewaters from the production of carbamates
328
and carbamoyl oximes (USEPA Hazardous Waste No.
329
K157), provided that the maximum weekly usage of
330
formaldehyde, methyl chloride, methylene chloride, and
331
triethylamine (including all amounts that cannot be
332
demonstrated to be reacted in the process, destroyed
333
through treatment, or recovered, i.e., what is discharged or
334
volatilized) divided by the average weekly flow of process
335
wastewater prior to any dilutions into the headworks of the
336
facility's wastewater treatment system does not exceed a
337
total of 5 parts per million by weight, or the total measured
338
concentration of these chemicals entering the headworks of
339
the facility's wastewater treatment system (at a facility that
340
is subject to regulation under the federal Clean Air Act new
341
source performance standards or national emission
342
standards for hazardous air pollutants of 40 CFR 60, 61, or
343
?
63 or at a facility that is subject to an enforceable limit in a
344
federal operating permit that minimizes fugitive emissions)
JCAR350721-0805030r01
345
does not exceed 5 parts per million on an average weekly
346
basis. A facility that chooses to measure concentration
347
levels must file a copy of its sampling and analysis plan
348
with the Agency. A facility must file a copy of a revised
349
sampling and analysis plan only if the initial plan is
350
rendered inaccurate by changes in the facility's operations.
351
The sampling and analysis plan must include the
352
monitoring point location (headworks), the sampling
353
frequency and methodology, and a list of constituents to be
354
monitored. A facility is eligible for the direct monitoring
355
option once it receives confirmation that the sampling and
356
analysis plan has been received by the Agency. The
357
Agency must reject the sampling and analysis plan if it
358
determines that the sampling and analysis plan fails to
359
include the information required by this subsection
360
(a)(2)(D)(vi) or that the plan parameters would not enable
361
the facility to calculate the weekly average concentration of
362
these chemicals accurately. If the Agency rejects the
363
sampling and analysis plan, or if the Agency determines
364
that the facility is not following the sampling and analysis
365
plan, the Agency must notify the facility to cease the use of
366
the direct monitoring option until such time as the bases for
367
rejection are corrected; or
368
369
vii)
It is wastewater derived from the treatment of one or more
370
of the following wastes listed in Section 721.132: organic
371
waste (including heavy ends, still bottoms, light ends, spent
372
solvents, filtrates, and decantates) from the production of
373
carbamates and carbamoyl oximes (USEPA Hazardous
374
Waste No. K156), provided that the maximum
375
concentration of formaldehyde, methyl chloride, methylene
376
chloride, and triethylamine prior to any dilutions into the
377
headworks of the facility's wastewater treatment system
378
does not exceed a total of 5 milligrams per liter, or the total
379
measured concentration of these chemicals entering the
380
headworks of the facility's wastewater treatment system (at
381
a facility that is subject to regulation under the federal
382
Clean Air Act new source performance standards or
383
national emission standards for hazardous air pollutants of
384
40 CFR 60, 61, or 63 or at a facility that is subject to an
385
enforceable limit in a federal operating permit that
386
minimizes fugitive emissions) does not exceed 5
387
milligrams per liter on an average weekly basis. A facility
JCAR350721-0805030r01
388
that chooses to measure concentration levels must file a
389
copy of its sampling and analysis plan with the Agency. A
390
facility must file a copy of a revised sampling and analysis
391
plan only if the initial plan is rendered inaccurate by
392
changes in the facility's operations. The sampling and
393
analysis plan must include the monitoring point location
394
(headworks), the sampling frequency and methodology,
395
and a list of constituents to be monitored. A facility is
396
eligible for the direct monitoring option once it receives
397
confirmation that the sampling and analysis plan has been
398
received by the Agency. The Agency must reject the
399
sampling and analysis plan if it determines that the
400
sampling and analysis plan fails
to
include the information
401
required by this subsection (a)(2)(D)(vii) or that the plan
402
parameters would not enable the facility to calculate the
403
weekly average concentration of these chemicals
404
accurately. If the Agency rejects the sampling and analysis
405
plan, or if the Agency determines that the facility is not
406
following the sampling and analysis plan, the Agency must
407
notify the facility to cease the use of the direct monitoring
408
option until such time as the bases for rejection are
409
corrected.
410
411
E)
Rebuttable presumption for used oil. Used oil containing more
412
than
1,000
ppm total halogens is presumed to be a hazardous waste
413
because it has been mixed with halogenated hazardous waste listed
414
in Subpart D of this Part. Persons may rebut this presumption by
415
demonstrating that the used oil does not contain hazardous waste
416
(for example, to show that the used oil does not contain significant
417
concentrations of halogenated hazardous constituents listed in
418
Appendix H of this Part).
419
420
i)
The rebuttable presumption does not apply to a
421
metalworking oil or fluid containing chlorinated paraffins if
422
it is processed through a tolling arrangement, as described
423
in 35
Ill.
Adm. Code 739.124(c), to reclaim metalworking
424
oils or fluids. The presumption does apply to a
425
metalworking oil or fluid if such an oil or fluid is recycled
426
in any other manner, or disposed of.
427
428
The rebuttable presumption does not apply
to a used oil
429
contaminated
with chlorofluorocarbons (CFCs) removed
430?
from refrigeration units where the CFCs are destined for
JCAR350721-0805030r01
431
reclamation. The rebuttable presumption does apply to a
432
used oil contaminated with CFCs that have been mixed
433
with used oil from a source other than a refrigeration unit.
434
435
b)
A solid waste that is not excluded from regulation pursuant to subsection (a)(1) of
436
this Section becomes a hazardous waste when any of the following events occur:
437
438
1)
In the case of a waste listed in Subpart D of this Part, when the waste first
439
meets the listing description set forth in Subpart D of this Part.
440
441
2)
In the case of a mixture of solid waste and one or more listed hazardous
442
wastes, when a hazardous waste listed in Subpart D of this Part is first
443
added to the solid waste.
444
445
3)
In the case of any other waste (including a waste mixture), when the waste
446
exhibits any of the characteristics identified in Subpart C of this Part.
447
448
c)
Unless and until it meets the criteria of subsection (d) of this Section, a hazardous
449
waste will remain a hazardous waste.
450
451
BOARD NOTE: This subsection (c) corresponds with 40 CFR 261.3(c)(1). The
452
Board has codified 40 CFR 261.3(c)(2) at subsection (e) of this Section.
453
454
d)
Any solid waste described in subsection (e) of this Section is not a hazardous
455
waste if it meets the following criteria:
456
457
1)
In the case of any solid waste, it does not exhibit any of the characteristics
458
of hazardous waste identified in Subpart C of this Part. (However, wastes
459
that exhibit a characteristic at the point of generation may still be subject
460
to 35 Ill. Adm. Code 728, even if they no longer exhibit a characteristic at
461
the point of land disposal.)
462
463
2)
In the case of a waste that is a listed waste pursuant to Subpart D of this
464
Part, a waste that contains a waste listed pursuant to Subpart D of this Part,
465
or a waste that is derived from a waste listed in Subpart D of this Part, it
466
also has been excluded from subsection (e) of this Section pursuant to 35
467
Ill. Adm. Code 720.120 and 720.122.
468
469
e)
Specific inclusions and exclusions.
470
471
1)
Except as otherwise provided in subsection (e)(2), (g), or (h) of this
472
Section, any solid waste generated from the treatment, storage, or disposal
473
of a hazardous waste, including any sludge, spill residue, ash, emission
JCAR350721-0805030r01
474
control dust, or leachate (but not including precipitation run-off), is a
475
hazardous waste. (However, materials that are reclaimed from solid
476
wastes and that are used beneficially are not solid wastes and hence are
477
not hazardous wastes under this provision unless the reclaimed material is
478
burned for energy recovery or used in a manner constituting disposal.)
479
480
2)
The following solid wastes are not hazardous even though they are
481
generated from the treatment, storage, or disposal of a hazardous waste,
482
unless they exhibit one or more of the characteristics of hazardous waste:
483
484
A)
Waste pickle liquor sludge generated by lime stabilization of spent
485
pickle liquor from the iron and steel industry (SIC Codes 331 and
486
332).
487
488
B)
Wastes from burning any of the materials exempted from
489
regulation by Section 721.106(a)(3)(C) and (a)(3)(D).
490
491
C)
Nonwastewater residues, such as slag, resulting from high
492
temperature metal recovery (HTMR) processing of K061, K062, or
493
F006 waste in the units identified in this subsection (e)(2) that are
494
disposed of in non-hazardous waste units, provided that these
495
residues meet the generic exclusion levels identified in the tables in
496
this subsection (e)(2)(C) for all constituents and the residues
497
exhibit no characteristics of hazardous waste. The types of units
498
identified are rotary kilns, flame reactors, electric furnaces, plasma
499
arc furnaces, slag reactors, rotary hearth furnace/electric furnace
500
combinations, or the following types of industrial furnaces (as
501
defined in 35 Ill. Adm. Code 720.110): blast furnaces; smelting,
502
melting, and refining furnaces (including pyrometallurgical
503
devices such as cupolas, reverberator furnaces, sintering machines,
504
roasters, and foundry furnaces); and other furnaces designated by
505
the Agency pursuant to that definition.
506
507
i)
Testing requirements must be incorporated in a facility's
508
waste analysis plan or a generator's self-implementing
509
waste analysis plan; at a minimum, composite samples of
510
residues must be collected and analyzed quarterly and when
511
the process or operation generating the waste changes.
512
513
ii)
Persons claiming this exclusion in an enforcement action
514
will have the burden of proving by clear and convincing
515
evidence that the material meets all of the exclusion
516
requirements. The generic exclusion levels are the
JCAR350721-0805030r01
517
following:
518
Generic exclusion levels for K061 and K062
nonwastewater HTMR residues:
Constituent
Maximum for any single
composite sample (mg/f)
Antimony
0.10
Arsenic
0.50
Barium
7.6
Beryllium
0.010
Cadmium
0.050
Chromium (total)
0.33
Lead
0.15
Mercury
0.009
Nickel
1.0
Selenium
0.16
Silver
0.30
Thallium
0.020
Vanadium
1.26
Zinc
70
519
Generic exclusion levels for F006 nonwastewater HTMR
residues:
Constituent
Maximum for any single
composite sample (mg/f)
Antimony
0.10
Arsenic
0.50
Barium
7.6
Beryllium
0.010
Cadmium
0.050
Chromium (total)
0.33
Cyanide (total) (mg/kg)
1.8
Lead
0.15
Mercury
0.009
Nickel
1.0
Selenium
0.16
Silver
0.30
Thallium
0.020
Zinc
70
520
JCAR350721-0805030r01
521
A one-time notification and certification must be placed in
522
the facility's files and sent to the Agency (or, for out-of-
523
State shipments, to the appropriate Regional Administrator
524
of USEPA or the state agency authorized to implement
525
federal 40 CFR 268 requirements) for K061, K062, or F006
526
HTMR residues that meet the generic exclusion levels for
527
all constituents, which do not exhibit any characteristics,
528
and which are sent to RCRA Subtitle D (municipal solid
529
waste landfill) units. The notification and certification that
530
is placed in the generator's or treater's files must be updated
531
if the process or operation generating the waste changes or
532
if the RCRA Subtitle D unit receiving the waste changes.
533
However, the generator or treater need only notify the
534
Agency on an annual basis if such changes occur. Such
535
notification and certification should be sent to the Agency
536
by the end of the calendar year, but no later than December
537
31. The notification must include the following
538
information: the name and address of the non-hazardous
539
waste management unit receiving the waste shipment; the
540
USEPA hazardous waste number and treatability group at
541
the initial point of generation; and the treatment standards
542
applicable to the waste at the initial point of generation.
543
The certification must be signed by an authorized
544
representative and must state as follows:
545
546
"I certify under penalty of law that the generic
547
exclusion levels for all constituents have been met
548
without impermissible dilution and that no
549
characteristic of hazardous waste is exhibited. I am
550
aware that there are significant penalties for
551
submitting a false certification, including the
552
possibility of fine and imprisonment."
553
554
D)
Biological treatment sludge from the treatment of one of the
555
following wastes listed in Section 721.132: organic waste
556
(including heavy ends, still bottoms, light ends, spent solvents,
557
filtrates, and decantates) from the production of carbamates and
558
carbamoyl oximes (USEPA Hazardous Waste No. K156) and
559
wastewaters from the production of carbamates and carbamoyl
560
oximes (USEPA Hazardous Waste No. K157).
561
562
E)
Catalyst inert support media separated from one of the following
563
wastes listed in Section 721.132: spent hydrotreating catalyst
JCAR350721-0805030r01
564
(USEPA hazardous waste number K171) and spent hydrorefining
565
catalyst (USEPA hazardous waste number K172).
566
567
BOARD NOTE: This subsection (e) would normally correspond with 40 CFR
568
261.3(e), a subsection that has been deleted and marked "reserved" by USEPA.
569
Rather, this subsection (e) corresponds with 40 CFR 261.3(c)(2), which the Board
570
codified here to comport with codification requirements and to enhance clarity.
571
572
f)
Notwithstanding subsections (a) through (e) of this Section and provided the
573
debris, as defined in 35 Ill. Adm. Code 728.102, does not exhibit a characteristic
574
identified at Subpart C of this Part, the following materials are not subject to
575
regulation under 35
Ill.
Adm. Code 702, 703, 720, 721 to 726, or 728:
576
577
1)
Hazardous debris as defined in 35 III. Adm. Code 728.102 that has been
578
treated using one of the required extraction or destruction technologies
579
specified in Table F to 35 Ill. Adm. Code 728; persons claiming this
580
exclusion in an enforcement action will have the burden of proving by
581
clear and convincing evidence that the material meets all of the exclusion
582
requirements; or
583
584
2)
Debris, as defined in 35 Ill. Adm. Code 728.102, that the Agency,
585
considering the extent of contamination, has determined is no longer
586
contaminated with hazardous waste.
587
588
Exclusion of certain wastes listed in Subpart D of this Part solely because they
589
exhibit a characteristic of ignitability, corrosivity, or reactivity.
590
591
1)
A hazardous waste that is listed in Subpart D of this Part solely because it
592
exhibits one or more characteristics of ignitability, as defined under
593
Section 721.121; corrosivity, as defined under Section 721.122; or
594
reactivity, as defined under Section 721.123 is not a hazardous waste if the
595
waste no longer exhibits any characteristic of hazardous waste identified
596
in Subpart C of this Part.
597
598
2)
The exclusion described in subsection (g)(1) of this Section also pertains
599
to the following:
600
601
A)
Any mixture of a solid waste and a hazardous waste listed in
602
Subpart
D
of this Part solely because it exhibits the characteristics
603
of ignitability, corrosivity, or reactivity, as regulated under
604
subsection (a)(2)(D) of this Section; and
605
606
B)
Any solid waste generated from treating, storing, or disposing of a
JCAR350721-0805030r01
607
hazardous waste listed in Subpart D of this Part solely because it
608
exhibits the characteristics of ignitability, corrosivity, or reactivity,
609
as regulated under subsection (e)(1) of this Section.
610
611
3)
Wastes excluded pursuant to this subsection (g) are subject to 35 III. Adm.
612
Code 728 (as applicable), even if they no longer exhibit a characteristic at
613
the point of land disposal.
614
615
h)
Eligible radioactive mixed waste.
616
617
1)
Hazardous waste containing radioactive waste is no longer a hazardous
618
waste when it meets the eligibility criteria and conditions of Subpart N of
619
35 Ill. Adm. Code 726 (i.e., it is "eligible radioactive mixed waste").
620
621
2)
The exemption described in subsection (h)(1) of this Section also pertains
622
to the following:
623
624
A)
Any mixture of a solid waste and an eligible radioactive mixed
625
waste; and
626
627
B)
Any solid waste generated from treating, storing, or disposing of
628
an eligible radioactive mixed waste.
629
630
3)
Waste exempted pursuant to this subsection (h) must meet the eligibility
631
criteria and specified conditions in 35 III. Adm. Code 726.325 and
632
726.330 (for storage and treatment) and in 35 III. Adm. Code 726.410 and
633
726.415 (for transportation and disposal). Waste that fails to satisfy these
634
eligibility criteria and conditions is regulated as hazardous waste.
635
636
(Source: Amended at 32 Ill. Reg.
, effective
)
637
638
Section 721.104 Exclusions
639
640
a)
Materials that are not solid wastes. The following materials are not solid wastes
641
for the purpose of this Part:
642
643
1)
Sewage.
644
645
A)
Domestic sewage (untreated sanitary wastes that pass through a
646
sewer system); and
647
648
B)
Any mixture of domestic sewage and other waste that passes
649
through a sewer system to publicly-owned treatment works for
JCAR350721-0805030r01
650
treatment.
651
652
2)
Industrial wastewater discharges that are point source discharges with
653
National Pollutant Discharge Elimination System (NPDES) permits issued
654
by the Agency pursuant to Section 12(f) of the Environmental Protection
655
Act [415 ILCS 5/12(0] and 35 Ill. Adm. Code 309.
656
657
BOARD NOTE: This exclusion applies only to the actual point source
658
discharge. It does not exclude industrial wastewaters while they are being
659
collected, stored, or treated before discharge, nor does it exclude sludges
660
that are generated by industrial wastewater treatment.
661
662
3)
Irrigation return flows.
663
664
4)
Source, by-product, or special nuclear material, as defined by section 11 of
665
the Atomic Energy Act of 1954, as amended (42 USC 2014), incorporated
666
by reference in 35 III. Adm. Code 720.111(b).
667
668
5)
Materials subjected to in-situ mining techniques that are not removed from
669
the ground as part of the extraction process.
670
671
6)
Pulping liquors (i.e., black liquors) that are reclaimed in a pulping liquor
672
recovery furnace and then reused in the pulping process, unless it is
673
accumulated speculatively, as defined in Section 721.101(c).
674
675
7)
Spent sulfuric acid used to produce virgin sulfuric acid, unless it is
676
accumulated speculatively, as defined in Section 721.101(c).
677
678
8)
Secondary materials that are reclaimed and returned to the original process
679
or processes in which they were generated, where they are reused in the
680
production process, provided that the following is true:
681
682
A)
Only tank storage is involved, and the entire process through
683
completion of reclamation is closed by being entirely connected
684
with pipes or other comparable enclosed means of conveyance;
685
686
B)
Reclamation does not involve controlled flame combustion (such
687
as occurs in boilers, industrial furnaces, or incinerators);
688
689
C)
The secondary materials are never accumulated in such tanks for
690
over 12 months without being reclaimed; and
691
692
D)
The reclaimed material is not used to produce a fuel or used to
JCAR350721-0805030r01
693?
produce products that are used in a manner constituting disposal.
694
695?
9)?
Wood preserving wastes.
696
697?
A)?
Spent wood preserving solutions that have been used and which
698?
are reclaimed and reused for their original intended purpose;
699
700?
B)
?
Wastewaters from the wood preserving process that have been
701?
reclaimed and which are reused to treat wood; and
702
703?
C)?
Prior to reuse, the wood preserving wastewaters and spent wood
704?
preserving solutions described in subsections (a)(9)(A) and
705?
(a)(9)(B) of this Section, so long as they meet all of the following
706?
conditions:
707
708?
i)
?
The wood preserving wastewaters and spent wood
709?
preserving solutions are reused on-site at water-borne
710?
plants in the production process for their original intended
711?
purpose;
712
713?
Prior to reuse, the wastewaters and spent wood preserving
714?
solutions are managed to prevent release to either land or
715?
groundwater or both;
716
717?
iii)?
Any unit used to manage wastewaters or spent wood
718?
preserving solutions prior to reuse can be visually or
719
?
otherwise determined to prevent such releases;
720
721
?
iv)
?
Any drip pad used to manage the wastewaters or spent
722?
wood preserving solutions prior to reuse complies with the
723
?
standards in Subpart W of 35 Ill. Adm. Code 725,
724?
regardless of whether the plant generates a total of less than
725?
100 kg/month of hazardous waste; and
726
727?
v)?
Prior to operating pursuant to this exclusion, the plant
728?
owner or operator prenaressubmits a one-time notification
729?
to the Agency stating that the plant intends to claim the
730?
exclusion, giving the date on which the plant intends to
731?
begin operating under the exclusion, and containing the
732?
following language: "I have read the applicable regulation
733?
establishing an exclusion for wood preserving wastewaters
734
?
and spent wood preserving solutions and understand it
735
?
requires me to comply at all times with the conditions set
JCAR350721-0805030r01
736
out in the regulation." The plant must maintain a copy of
737
that document in its on-site records until closure of the
738
facilityfor a period of no less than three years from the date
739
-specified in the notice. The exclusion applies only so long
740
as the plant meets all of the conditions. If the plant goes
741
out of compliance with any condition, it may apply to the
742
Agency for reinstatement. The Agency must reinstate the
743
exclusion in writing if it finds that the plant has returned to
744
compliance with all conditions and that the violations are
745
not likely to recur. If the Agency denies an application, it
746
must transmit to the applicant specific, detailed statements
747
in writing as to the reasons it denied the application. The
748
applicant under this subsection (a)(9)(C)(v) may appeal the
749
Agency's determination to deny the reinstatement, to grant
750
the reinstatement with conditions, or to terminate a
751
reinstatement before the Board pursuant to Section 40 of
752
the Act [415 ILCS 5/40].
753
754
10)
Hazardous waste numbers K060, K087, K141, K142, K143, K144, K145,
755
K147, and K148, and any wastes from the coke by-products processes that
756
are hazardous only because they exhibit the toxicity characteristic
757
specified in Section 721.124, when subsequent to generation these
758
materials are recycled to coke ovens, to the tar recovery process as a
759
feedstock to produce coal tar, or are mixed with coal tar prior to the tar's
760
sale or refining. This exclusion is conditioned on there being no land
761
disposal of the waste from the point it is generated to the point it is
762
recycled to coke ovens, to tar recovery, to the tar refining processes, or
763
prior to when it is mixed with coal.
764
765
11 )
Nonwastewater splash condenser dross residue from the treatment of
766
hazardous waste number K061 in high temperature metals recovery units,
767
provided it is shipped in drums (if shipped) and not land disposed before
768
recovery.
769
770
12)
Certain oil-bearing hazardous secondary materials and recovered oil, as
771
follows:
772
773
A)
Oil-bearing hazardous secondary materials (i.e., sludges, by-
774
products, or spent materials) that are generated at a petroleum
775
refinery (standard industrial classification (SIC) code 2911) and
776
are inserted into the petroleum refining process (SIC code 2911:
777
including, but not limited to, distillation, catalytic cracking,
778
fractionation, or thermal cracking units (i.e., cokers)), unless the
JCAR350721-0805030r01
779
material is placed on the land, or speculatively accumulated before
780
being so recycled. Materials inserted into thermal cracking units
781
are excluded under this subsection (a)(12), provided that the coke
782
product also does not exhibit a characteristic of hazardous waste.
783
Oil-bearing hazardous secondary materials may be inserted into the
784
same petroleum refinery where they are generated or sent directly
785
to another petroleum refinery and still be excluded under this
786
provision. Except as provided in subsection (a)(12)(B) of this
787
Section, oil-bearing hazardous secondary materials generated
788
elsewhere in the petroleum industry (i.e., from sources other than
789
petroleum refineries) are not excluded under this Section.
790
Residuals generated from processing or recycling materials
791
excluded under this subsection (a)(12)(A), where such materials as
792
generated would have otherwise met a listing under Subpart D of
793
this Part, are designated as USEPA hazardous waste number F037
794
listed wastes when disposed of or intended for disposal.
795
796
B)
Recovered oil that is recycled in the same manner and with the
797
same conditions as described in subsection (a)(12)(A) of this
798
Section. Recovered oil is oil that has been reclaimed from
799
secondary materials (including wastewater) generated from normal
800
petroleum industry practices, including refining, exploration and
801
production, bulk storage, and transportation incident thereto (SIC
802
codes 1311, 1321, 1381, 1382, 1389, 2911, 4612, 4613, 4922,
803
4923, 4789, 5171, and 5172). Recovered oil does not include oil-
804
bearing hazardous wastes listed in Subpart D of this Part; however,
805
oil recovered from such wastes may be considered recovered oil.
806
Recovered oil does not include used oil, as defined in 35 III. Adm.
807
Code 739.100.
808
809
13)
Excluded scrap metal (processed scrap metal, unprocessed home scrap
810
metal, and unprocessed prompt scrap metal) being recycled.
811
812
14)
Shredded circuit boards being recycled, provided that they meet the
813
following conditions:
814
815
A)
The circuit boards are stored in containers sufficient to prevent a
816
release to the environment prior to recovery; and
817
818
B)
The circuit boards are free of mercury switches, mercury relays,
819
nickel-cadmium batteries, and lithium batteries.
820
821
15)
Condensates derived from the overhead gases from !craft mill steam
JCAR350721-0805030r01
822
strippers that are used to comply with federal Clean Air Act regulation 40
823
CFR 63.446(e). The exemption applies only to combustion at the mill
824
generating the condensates.
825
826
16)
Comparable fuels or comparable syngas fuels (i.e., comparable or syngas
827
fuels) that meet the requirements of Section 721.138.
828
829
17)
Spent materials (as defined in Section 721.101) (other than hazardous
830
wastes listed in Subpart D of this Part) generated within the primary
831
mineral processing industry from which minerals, acids, cyanide, water, or
832
other values are recovered by mineral processing or by benefication,
833
provided that the following is true:
834
835
A)
The spent material is legitimately recycled to recover minerals,
836
acids, cyanide, water, or other values;
837
838
B)
The spent material is not accumulated speculatively;
839
840
C)
Except as provided in subsection (a)(17)(D) of this Section, the
841
spent material is stored in tanks, containers, or buildings that meet
842
the following minimum integrity standards: a building must be an
843
engineered structure with a floor, walls, and a roof all of which are
844
made of non-earthen materials providing structural support (except
845
that smelter buildings may have partially earthen floors, provided
846
that the spent material is stored on the non-earthen portion), and
847
have a roof suitable for diverting rainwater away from the
848
foundation; a tank must be free standing, not be a surface
849
impoundment (as defined in 35 Ill. Adm. Code 720.110), and be
850
manufactured of a material suitable for containment of its contents;
851
a container must be free standing and be manufactured of a
852
material suitable for containment of its contents. If a tank or
853
container contains any particulate that may be subject to wind
854
dispersal, the owner or operator must operate the unit in a manner
855
that controls fugitive dust. A tank, container, or building must be
856
designed, constructed, and operated to prevent significant releases
857
to the environment of these materials.
858
859
D)
The Agency must allow by permit that solid mineral processing
860
spent materials only may be placed on pads, rather than in tanks,
861
containers, or buildings if the facility owner or operator can
862
demonstrate the following: the solid mineral processing secondary
863
materials do not contain any free liquid; the pads are designed,
864
constructed, and operated to prevent significant releases of the
JCAR350721-0805030r01
865
spent material into the environment; and the pads provide the same
866
degree of containment afforded by the non-RCRA tanks,
867
containers, and buildings eligible for exclusion.
868
869
i)
The Agency must also consider whether storage on pads
870
poses the potential for significant releases via groundwater,
871
surface water, and air exposure pathways. Factors to be
872
considered for assessing the groundwater, surface water,
873
and air exposure pathways must include the following: the
874
volume and physical and chemical properties of the spent
875
material, including its potential for migration off the pad;
876
the potential for human or environmental exposure to
877
hazardous constituents migrating from the pad via each
878
exposure pathway; and the possibility and extent of harm to
879
human and environmental receptors via each exposure
880
pathway.
881
882
Pads must meet the following minimum standards: they
883
must be designed of non-earthen material that is compatible
884
with the chemical nature of the mineral processing spent
885
material; they must be capable of withstanding physical
886
stresses associated with placement and removal; they must
887
have runon and runoff controls; they must be operated in a
888
manner that controls fugitive dust; and they must have
889
integrity assurance through inspections and maintenance
890
programs.
891
892
iii)
Before making a determination under this subsection
893
(a)(17)(D), the Agency must provide notice and the
894
opportunity for comment to all persons potentially
895
interested in the determination. This can be accomplished
896
by placing notice of this action in major local newspapers,
897
or broadcasting notice over local radio stations.
898
899
BOARD NOTE: See Subpart
D
of 35 III. Adm. Code 703 for the
900
RCRA Subtitle C permit public notice requirements.
901
902
E)
The owner or operator provides a notice to the Agency, providing
903
the following information: the types of materials to be recycled,
904
the type and location of the storage units and recycling processes,
905
and the annual quantities expected to be placed in non-land-based
906
units. This notification must be updated when there is a change in
907
the type of materials recycled or the location of the recycling
JCAR350721-0805030r01
908
process.
909
910
F)
For purposes of subsection (b)(7) of this Section, mineral
911
processing spent materials must be the result of mineral processing
912
and may not include any listed hazardous wastes. Listed
913
hazardous wastes and characteristic hazardous wastes generated by
914
non-mineral processing industries are not eligible for the
915
conditional exclusion from the definition of solid waste.
916
917
18)
Petrochemical recovered oil from an associated organic chemical
918
manufacturing facility, where the oil is to be inserted into the petroleum
919
refining process (SIC code 2911) along with normal petroleum refinery
920
process streams, provided that both of the following conditions are true of
921
the oil:
922
923
A)
The oil is hazardous only because it exhibits the characteristic of
924
ignitability (as defined in Section 721.121) or toxicity for benzene
925
(Section 721.124, USEPA hazardous waste code D018);
926
927
B)
The oil generated by the organic chemical manufacturing facility is
928
not placed on the land, or speculatively accumulated before being
929
recycled into the petroleum refining process. An "associated
930
organic chemical manufacturing facility" is a facility for which all
931
of the following is true: its primary SIC code is 2869, but its
932
operations may also include SIC codes 2821, 2822, and 2865; it is
933
physically co-located with a petroleum refinery; and the petroleum
934
refinery to which the oil being recycled is returned also provides
935
hydrocarbon feedstocks to the organic chemical manufacturing
936
facility. "Petrochemical recovered oil" is oil that has been
937
reclaimed from secondary materials (i.e., sludges, by-products, or
938
spent materials, including wastewater) from normal organic
939
chemical manufacturing operations, as well as oil recovered from
940
organic chemical manufacturing processes.
941
942
19)
Spent caustic solutions from petroleum refining liquid treating processes
943
used as a feedstock to produce cresylic or naphthenic acid, unless the
944
material is placed on the land or accumulated speculatively, as defined in
945
Section 721.101(c).
946
947
20)
Hazardous secondary materials used to make zinc fertilizers, provided that
948
the following conditions are satisfied:
949
JCAR350721-0805030r01
950
A)
Hazardous secondary materials used to make zinc micronutrient
951
fertilizers must not be accumulated speculatively, as defined in
952
Section 721.101(c)(8).
953
954
B)
A generator or intermediate handler of zinc-bearing hazardous
955
secondary materials that are to be incorporated into zinc fertilizers
956
must fulfill the following conditions:
957
958
i)
It must submit a one-time notice to the Agency that
959
contains the name, address, and USEPA identification
960
number of the generator or intermediate handler facility,
961
that provides a brief description of the secondary material
962
that will be subject to the exclusion, and which identifies
963
when the manufacturer intends to begin managing excluded
964
zinc-bearing hazardous secondary materials under the
965
conditions specified in this subsection (a)(20).
966
967
It must store the excluded secondary material in tanks,
968
containers, or buildings that are constructed and maintained
969
in a way that prevents releases of the secondary materials
970
into the environment. At a minimum, any building used for
971
this purpose must be an engineered structure made of non-
972
earthen materials that provide structural support, and it
973
must have a floor, walls, and a roof that prevent wind
974
dispersal and contact with rainwater. A tank used for this
975
purpose must be structurally sound and, if outdoors, it must
976
have a roof or cover that prevents contact with wind and
977
rain. A container used for this purpose must be kept
978
closed, except when it is necessary to add or remove
979
material, and it must be in sound condition. Containers that
980
are stored outdoors must be managed within storage areas
981
that fulfill the conditions of subsection (a)(20)(F) of this
982
Section:
983
984
iii)
With each off-site shipment of excluded hazardous
985
secondary materials, it must provide written notice to the
986
receiving facility that the material is subject to the
987
conditions of this subsection (a)(20).
988
989
It must maintain records at the generator's or intermediate
990
handler's facility for no less than three years of all
991
shipments of excluded hazardous secondary materials. For
992
each shipment these records must, at a minimum, contain
JCAR350721-0805030r01
993
the information specified in subsection (a)(20)(G) of this
994
Section.
995
996
C)
A manufacturer of zinc fertilizers or zinc fertilizer ingredients
997
made from excluded hazardous secondary materials must fulfill the
998
following conditions:
999
1000
i)
It must store excluded hazardous secondary materials in
1001
accordance with the storage requirements for generators
1002
and intermediate handlers, as specified in subsection
1003
(a)(20)(B)(ii) of this Section.
1004
1005
It must submit a one-time notification to the Agency that, at
1006
a minimum, specifies the name, address, and USEPA
1007
identification number of the manufacturing facility and
1008
which identifies when the manufacturer intends to begin
1009
managing excluded zinc-bearing hazardous secondary
1010
materials under the conditions specified in this subsection
1011
(a)(20).
1012
1013
iii)
It must maintain for a minimum of three years records of
1014
all shipments of excluded hazardous secondary materials
1015
received by the manufacturer, which must at a minimum
1016
identify for each shipment the name and address of the
1017
generating facility, the name of transporter, and the date on
1018
which the materials were received, the quantity received,
1019
and a brief description of the industrial process that
1020
generated the material.
1021
1022
iv)
It must submit an annual report to the Agency that
1023
identifies the total quantities of all excluded hazardous
1024
secondary materials that were used to manufacture zinc
1025
fertilizers or zinc fertilizer ingredients in the previous year,
1026
the name and address of each generating facility, and the
1027
industrial processes from which the hazardous secondary
1028
materials were generated.
1029
1030
D)
Nothing in this Section preempts, overrides, or otherwise negates
1031
the provision in 35 Ill. Adm. Code 722.111 that requires any
1032
person who generates a solid waste to determine if that waste is a
1033
hazardous waste.
/034
JCAR350721-0805030r01
1035
E)
Interim status and permitted storage units that have been used to
1036
store only zinc-bearing hazardous wastes prior to the submission of
1037
the one-time notice described in subsection (a)(20)(B)(i) of this
1038
Section, and that afterward will be used only to store hazardous
1039
secondary materials excluded under this subsection (a)(20), are not
1040
subject to the closure requirements of 35 Ill. Adm. Code 724 and
1041
725.
1042
1043
F)
A container used to store excluded secondary material must fulfill
1044
the following conditions:
1045
1046
i)
It must have containment structures or systems sufficiently
1047
impervious to contain leaks, spills, and accumulated
1048
precipitation;
1049
1050
It must provide for effective drainage and removal of leaks,
1051
spills, and accumulated precipitation; and
1052
1053
iii)
It must prevent run-on into the containment system.
1054
1055
BOARD NOTE: Subsections (a)(20)(F)(i) through (a)(20)(F)(iii)
1056
are derived from 40 CFR 261.4(a)(20)(ii)(B)(1) through
1057
(a)(20)(ii)(B)(3). The Board added the preamble to these federal
1058
paragraphs as subsection (a)(20)(F) to comport with Illinois
1059
Administrative Code codification requirements.
1060
1061
G)
Required records of shipments of excluded hazardous secondary
1062
materials must, at a minimum, contain the following information:
1063
1064
i)
The name of the transporter and date of the shipment;
1065
1066
ii)
The name and address of the facility that received the
1067
excluded material, along with documentation confirming
1068
receipt of the shipment; and
1069
1070
iii)
The type and quantity of excluded secondary material in
1071
each shipment.
1072
1073
BOARD NOTE: Subsections (a)(20)(G)(i) through (a)(20)(G)(iii)
1074
are derived from 40 CFR 261.4(a)(20)(ii)(D)(1) through
1075
(a)(20)(ii)(D)(3). The Board added the preamble to these federal
1076
paragraphs as subsection (a)(20)(G) to comport with Illinois
1077
Administrative Code codification requirements.
JCAR350721-0805030r01
1078
1079
21)
Zinc fertilizers made from hazardous wastes or hazardous secondary
1080
materials that are excluded under subsection (a)(20) of this Section,
1081
provided that the following conditions are fulfilled:
1082
1083
A)
The fertilizers meet the following contaminant limits:
1084
1085
i)
For metal contaminants:
1086
Constituent Maximum Allowable Total Concentration
in Fertilizer, per Unit (1%) of Zinc (ppm)
Arsenic
0.3
Cadmium
1.4
Chromium
0.6
Lead
2.8
Mercury
0.3
1087
1088
ii)
For dioxin contaminants, the fertilizer must contain no
1089
more than eight parts per trillion of dioxin, measured as
1090
toxic equivalent (TEQ).
1091
1092
B)
The manufacturer performs sampling and analysis of the fertilizer
1093
product to determine compliance with the contaminant limits for
1094
metals no less frequently than once every six months, and for
1095
dioxins no less frequently than once every 12 months. Testing
1096
must also be performed whenever changes occur to manufacturing
1097
processes or ingredients that could significantly affect the amounts
1098
of contaminants in the fertilizer product. The manufacturer may
1099
use any reliable analytical method to demonstrate that no
1100
constituent of concern is present in the product at concentrations
1101
above the applicable limits. It is the responsibility of the
1102
manufacturer to ensure that the sampling and analysis are
1103
unbiased, precise, and representative of the products introduced
1104
into commerce.
1105
1106
C)
The manufacturer maintains for no less than three years records of
1107
all sampling and analyses performed for purposes of determining
1108
compliance with subsection (a)(21)(B) of this Section. Such
1109
records must at a minimum include the following:
1110
1111
i)
The dates
and times product samples were taken, and the
1112
dates the samples were analyzed;
1113
JCAR350721-0805030r01
1114
The names and qualifications of the persons taking the
1115
samples;
1116
1117
iii)
A description of the methods and equipment used to take
1118
the samples;
1119
1120
The name and address of the laboratory facility at which
1121
analyses of the samples were performed;
1122
1123
v)
A description of the analytical methods used, including any
1124
cleanup and sample preparation methods; and
1125
1126
vi)
All laboratory analytical results used to determine
1127
compliance with the contaminant limits specified in this
1128
subsection (a)(21).
1129
1130
n
Used CRTs.
1131
1132
A.1
Used intact CRTs, as defined in 35 Ill. Adm. Code 720.110, are
1133
not solid waste within the United States, unless they are disposed
1134
of or speculatively accumulated as defined in Section
1135
721.101(c)(8), by a CRT collector or glass processor.
1136
1137
HI
Used, intact CRTs, as defined in 35 111. Adm. Code 720.110, are
1138
not solid waste when exported for recycling, provided that they
1139
meet the requirements of Section 721.140.
1140
1141
Q
Used, broken CRTs as defined in 35 Ill. Adm. Code 720.110, are
1142
not solid waste provided that they meet the requirements of
1143
Section 721.139.
1144
1145
12)
?
Glass removed from CRTs is not a solid waste provided that it
1146
meets the requirements of Section 721.139(c).
1147
1148
b)
Solid wastes that are not hazardous wastes. The following solid wastes are not
1149
hazardous wastes:
1150
1151
1)
Household waste, including household waste that has been collected,
1152
transported, stored, treated, disposed of, recovered (e.g., refuse-derived
1153
fuel), or reused. "Household waste" means any waste material (including
1154
garbage, trash, and sanitary wastes in septic tanks) derived from
1155
households (including single and multiple residences, hotels, and
motels,
1156
bunkhouses, ranger stations, crew quarters, campgrounds, picnic grounds,
JCAR350721-0805030r01
1157
and day-use recreation areas). A resource recovery facility managing
1158
municipal solid waste must not be deemed to be treating, storing,
1159
disposing of, or otherwise managing hazardous wastes for the purposes of
1160
regulation under this Part, if the following describe the facility:
1161
1162
A)
The facility receives and burns only the following waste:
1163
1164
i)
Household waste (from single and multiple dwellings,
1165
hotels, motels, and other residential sources); or
1166
1167
Solid waste from commercial or industrial sources that does
1168
not contain hazardous waste; and
1169
1170
B)
The facility does not accept hazardous waste and the owner or
1171
operator of such facility has established contractual requirements
1172
or other appropriate notification or inspection procedures to assure
1173
that hazardous wastes are not received at or burned in such facility.
1174
1175
BOARD NOTE: The U.S. Supreme Court determined, in City of
1176
Chicago v. Environmental Defense Fund, Inc., 511 U.S. 328, 114
1177
S. Ct. 1588, 128 L. Ed. 2d 302 (1994), that this exclusion and
1178
RCRA section 3001(i) (42 USC 69210)) do not exclude the ash
1179
from facilities covered by this subsection (b)(1) from regulation as
1180
a hazardous waste. At 59 Fed. Reg. 29372 (June 7, 1994), USEPA
1181
granted facilities managing ash from such facilities that is
1182
determined a hazardous waste under Subpart C of this Part until
1183
December 7, 1994 to file a Part A permit application pursuant to
1184
35 Ill. Adm. Code 703.181. At 60 Fed. Reg. 6666 (Feb. 3, 1995),
1185
USEPA stated that it interpreted that the point at which ash
1186
becomes subject to RCRA Subtitle C regulation is when that
1187
material leaves the combustion building (including connected air
1188
pollution control equipment).
1189
1190
2)
Solid wastes generated by any of the following that are returned to the soil
1191
as fertilizers:
1192
1193
A)
The growing and harvesting of agricultural crops, or
1194
1195
B)
The raising of animals, including animal manures.
1196
1197
3)
Mining overburden returned to the mine site.
1198
1199
4)
Fly ash waste, bottom ash waste, slag waste, and flue gas emission control
JCAR350721-0805030r01
1200
waste generated primarily from the combustion of coal or other fossil
1201
fuels, except as provided in 35 III. Adm. Code 726.212 for facilities that
1202
burn or process hazardous waste.
1203
1204
5)
Drilling fluids, produced waters, and other wastes associated with the
1205
exploration, development, or production of crude oil, natural gas, or
1206
geothermal energy.
1207
1208
6)
Chromium wastes.
1209
1210
A)
Wastes that fail the test for the toxicity characteristic (Section
1211
721.124 and Appendix B to this Part) because chromium is present
1212
or which are listed in Subpart D of this Part due to the presence of
1213
chromium, that do not fail the test for the toxicity characteristic for
1214
any other constituent or which are not listed due to the presence of
1215
any other constituent, and that do not fail the test for any other
1216
characteristic, if the waste generator shows the following:
1217
1218
The chromium in the waste is exclusively (or nearly
1219
exclusively) trivalent chromium;
1220
1221
The waste is generated from an industrial process that uses
1222
trivalent chromium exclusively (or nearly exclusively) and
1223
the process does not generate hexavalent chromium; and
1224
1225
iii)
The waste is typically and frequently managed in non-
1226
oxidizing environments.
1227
1228
B)
The following are specific wastes that meet the standard in
1229
subsection (b)(6)(A) of this Section (so long as they do not fail the
1230
test for the toxicity characteristic for any other constituent and do
1231
not exhibit any other characteristic):
1232
1233
i)
Chrome (blue) trimmings generated by the following
1234
subcategories of the leather tanning and finishing industry:
1235
hair pulp/chrome tan/retan/wet finish, hair save/chrome
1236
tan/retan/wet finish, retan/wet finish, no beamhouse,
1237
through-the-blue, and shearling;
1238
1239
Chrome (blue) shavings generated by the following
1240
subcategories of the leather tanning and finishing industry:
1241
hair
pulp/chrome tan/retan/wet finish, hair save/chrome
1242
tan/retan/wet finish, retan/wet finish, no beamhouse,
JCAR350721-0805030r01
1243
through-the-blue, and shearling;
1244
1245
Buffing dust generated by the following subcategories of
1246
the leather tanning and finishing industry: hair
1247
pulp/chrome tan/retan/wet finish, hair save/chrome
1248
tan/retan/wet finish, retan/wet finish, no beamhouse,
1249
through-the-blue;
1250
1251
Sewer screenings generated by the following subcategories
1252
of the leather tanning and finishing industry: hair
1253
pulp/chrome tan/retan/wet finish, hair save/chrome
1254
tan/retan/wet finish, retan/wet finish, no beamhouse,
1255
through-the-blue, and shearling;
1256
1257
v)
Wastewater treatment sludges generated by the following
1258
subcategories of the leather tanning and finishing industry:
1259
hair pulp/chrome tan/retan/wet finish, hair save/chrome
1260
tan/retan/wet finish, retan/wet finish, no beamhouse,
1261
through-the-blue, and shearling;
1262
1263
Wastewater treatment sludges generated by the following
1264
subcategories of the leather tanning and finishing industry:
1265
hair pulp/chrome tan/retan/wet finish, hair save/chrome
1266
tan/retan/wet finish, and through-the-blue;
1267
1268
vii)
Waste scrap leather from the leather tanning industry, the
1269
shoe manufacturing industry, and other leather product
1270
manufacturing industries; and
1271
1272
viii) Wastewater treatment sludges from the production of
1273
titanium dioxide pigment using chromium-bearing ores by
1274
the chloride process.
1275
1276
7)
Solid waste from the extraction, beneficiation, and processing of ores and
1277
minerals (including coal, phosphate rock, and overburden from the mining
1278
of uranium ore), except as provided by 35 Ill. Adm. Code 726.212 for
1279
facilities that burn or process hazardous waste.
1280
1281
A)
For purposes of this subsection (b)(7), beneficiation of ores and
1282
minerals is restricted to the following activities: crushing;
1283
grinding; washing; dissolution; crystallization; filtration; sorting;
1284
sizing; drying; sintering; pelletizing; briquetting; calcining to
1285
remove water or carbon dioxide; roasting; autoclaving or
JCAR350721-0805030r01
1286
chlorination in preparation for leaching (except where the roasting
1287
(or autoclaving or chlorination) and leaching sequence produces a
1288
final or intermediate product that does not undergo further
1289
beneficiation or processing); gravity concentration; magnetic
1290
separation; electrostatic separation; floatation; ion exchange;
1291
solvent extraction; electrowinning; precipitation; amalgamation;
1292
and heap, dump, vat tank, and in situ leaching.
1293
1294
B)
For the purposes of this subsection (b)(7), solid waste from the
1295
processing of ores and minerals includes only the following wastes
1296
as generated:
1297
1298
i)
Slag from primary copper processing;
1299
1300
ii)
Slag from primary lead processing;
1301
1302
iii)
Red and brown muds from bauxite refining;
1303
1304
iv)
Phosphogypsum from phosphoric acid production;
1305
1306
v)
Slag from elemental phosphorus production;
1307
1308
vi)
Gasifier ash from coal gasification;
1309
1310
vii)
Process wastewater from coal gasification;
1311
1312
viii) Calcium sulfate wastewater treatment plant sludge from
1313
primary copper processing;
1314
1315
ix)
Slag tailings from primary copper processing;
1316
1317
x)
Fluorogypsum from hydrofluoric acid production;
1318
1319
xi)
Process wastewater from hydrofluoric acid production;
1320
1321
xi i)
Air pollution control dust or sludge from iron blast
1322
furnaces;
1323
1324
xiii) Iron blast furnace slag;
1325
1326
xiv) Treated residue from roasting and leaching of chrome ore;
1327
1328
xv)
Process wastewater from primary magnesium processing
JCAR350721-0805030r01
1329
by the anhydrous process;
1330
1331
xvi) Process wastewater from phosphoric acid production;
1332
1333
xvii) Basic oxygen furnace and open hearth furnace air pollution
1334
control dust or sludge from carbon steel production;
1335
1336
xviii) Basic oxygen furnace and open hearth furnace slag from
1337
carbon steel production;
1338
1339
xix) Chloride processing waste solids from titanium
1340
tetrachloride production; and
1341
1342
xx)
Slag from primary zinc production.
1343
1344
C)
A residue derived from co-processing mineral processing
1345
secondary materials with normal beneficiation raw materials or
1346
with normal mineral processing raw materials remains excluded
1347
under this subsection (b) if the following conditions are fulfilled:
1348
1349
i)
The owner or operator processes at least 50 percent by
1350
weight normal beneficiation raw materials or normal
1351
mineral processing raw materials; and
1352
1353
The owner or operator legitimately reclaims the secondary
1354
mineral processing materials.
1355
1356
8)
Cement kiln dust waste, except as provided by 35
Adm. Code 726.212
1357
for facilities that burn or process hazardous waste.
1358
1359
9)
Solid waste that consists of discarded arsenical-treated wood or wood
1360
products that fails the test for the toxicity characteristic for hazardous
1361
waste codes D004 through D017 and which is not a hazardous waste for
1362
any other reason if the waste is generated by persons that utilize the
1363
arsenical-treated wood and wood products for these materials' intended
1364
end use.
1365
1366
10)
Petroleum-contaminated media and debris that fail the test for the toxicity
1367
characteristic of Section 721.124 (hazardous waste codes D018 through
1368
D043 only) and which are subject to corrective action regulations under 35
1369
Ill. Adm. Code 731.
1370
1371
11)
This subsection (b)(11) corresponds with 40 CFR 261.4(b)(11), which
JCAR350721-0805030r01
1372
expired by its own terms on January 25, 1993. This statement maintains
1373
structural parity with USEPA regulations.
1374
1375
12)
Used chlorofluorocarbon refrigerants from totally enclosed heat transfer
1376
equipment, including mobile air conditioning systems, mobile
1377
refrigeration, and commercial and industrial air conditioning and
1378
refrigeration systems, that use chlorofluorocarbons as the heat transfer
1379
fluid in a refrigeration cycle, provided the refrigerant is reclaimed for
1380
further use.
1381
1382
13)
Non-terne plated used oil filters that are not mixed with wastes listed in
1383
Subpart D of this Part, if these oil filters have been gravity hot-drained
1384
using one of the following methods:
1385
1386
A)
Puncturing the filter anti-drain back valve or the filter dome end
1387
and hot-draining;
1388
1389
B)
Hot-draining and crushing;
1390
1391
C)
Dismantling and hot-draining; or
1392
1393
D)
Any other equivalent hot-draining method that will remove used
1394
oil.
1395
1396
14)
Used oil re-refining distillation bottoms that are used as feedstock to
1397
manufacture asphalt products.
1398
1399
15)
Leachate or gas condensate collected from landfills where certain solid
1400
wastes have been disposed of, under the following circumstances:
1401
1402
A)
The following conditions must be fulfilled:
1403
1404
i)
The solid wastes disposed of would meet one or more of
1405
the listing descriptions for the following USEPA hazardous
1406
waste numbers that are generated after the effective date
1407
listed for the waste:
1408
USEPA Hazardous
Listing Effective Date
Waste Numbers
K169, K170, K171, and K172
February 8, 1999
K174 and K175
May 7, 2001
JCAR350721-0805030r01
K176, K177, and K178
May 20, 2002
K181
August 23, 2005
1409
1410
The solid wastes described in subsection (b)(15)(A)(i) of
1411
this Section were disposed of prior to the effective date of
1412
the listing (as set forth in that subsection);
1413
1414
iii)
The leachate or gas condensate does not exhibit any
1415
characteristic of hazardous waste nor is derived from any
1416
other listed hazardous waste; and
1417
1418
iv)
Discharge of the leachate or gas condensate, including
1419
leachate or gas condensate transferred from the landfill to a
1420
POTW by truck, rail, or dedicated pipe, is subject to
1421
regulation under section 307(b) or 402 of the federal Clean
1422
Water Act.
1423
1424
B)
Leachate or gas condensate derived from K169, K170, K171,
1425
K172, K176, K177, or K178 waste will no longer be exempt if it is
1426
stored or managed in a surface impoundment prior to discharge.
1427
After February 26, 2007, leachate or gas condensate derived from
1428
K181 waste will no longer be exempt if it is stored or managed in a
1429
surface impoundment prior to discharge. There is one exception:
1430
if the surface impoundment is used to temporarily store leachate or
1431
gas condensate in response to an emergency situation (e.g.,
1432
shutdown of wastewater treatment system), provided the
1433
impoundment has a double liner, and provided the leachate or gas
1434
condensate is removed from the impoundment and continues to be
1435
managed in compliance with the conditions of this subsection
1436
(b)(15) after the emergency ends.
1437
1438
c)
Hazardous wastes that are exempted from certain regulations. A hazardous waste
1439
that is generated in a product or raw material storage tank, a product or raw
1440
material transport vehicle or vessel, a product or raw material pipeline, or in a
1441
manufacturing process unit, or an associated non-waste-treatment manufacturing
1442
unit, is not subject to regulation under 35 Ill. Adm. Code 702, 703, and 722
1443
through 728 or to the notification requirements of section 3010 of RCRA until it
1444
exits the unit in which it was generated, unless the unit is a surface impoundment,
1445
or unless the hazardous waste remains in the unit more than 90 days after the unit
1446
ceases to be operated for manufacturing or for storage or transportation of product
1447
or raw materials.
1448
1449 d)
Samples.
JCAR350721-0805030r01
1450
1451
1)
Except as provided in subsection (d)(2) of this Section, a sample of solid
1452
waste or a sample of water, soil, or air that is collected for the sole purpose
1453
of testing to determine its characteristics or composition is not subject to
1454
any requirements of this Part or 35 III. Adm. Code 702, 703, and 722
1455
through 728. The sample qualifies when it fulfills one of the following
1456
conditions:
1457
1458
A)
The sample is being transported to a laboratory for the purpose of
1459
testing;
1460
1461
The sample is being transported back to the sample collector after
1462
testing;
1463
1464
C)
The sample is being stored by the sample collector before transport
1465
to a laboratory for testing;
1466
1467
D)
The sample is being stored in a laboratory before testing;
1468
1469
E)
The sample is being stored in a laboratory for testing but before it
1470
is returned to the sample collector; or
1471
1472
F)
The sample is being stored temporarily in the laboratory after
1473
testing for a specific purpose (for example, until conclusion of a
1474
court case or enforcement action where further testing of the
1475
sample may be necessary).
1476
1477
2)
In order to qualify for the exemption in subsection (d)(1)(A) or (d)(1)(B)
1478
of this Section, a sample collector shipping samples to a laboratory and a
1479
laboratory returning samples to a sample collector must do the following:
1480
1481
A)
Comply with U.S. Department of Transportation (USDOT), U.S.
1482
Postal Service (USPS), or any other applicable shipping
1483
requirements; or
1484
1485
B)
Comply with the following requirements if the sample collector
1486
determines that USDOT, USPS, or other shipping requirements do
1487
not apply to the shipment of the sample:
1488
1489
i)
Assure that the following information accompanies the
1490
sample: The sample collector's name, mailing address, and
1491
telephone number; the laboratory's name, mailing address,
1492
and telephone number; the quantity of the sample; the date
JCAR350721-0805030r01
1493
of the shipment; and a description of the sample; and
1494
1495
Package the sample so that it does not leak, spill, or
1496
vaporize from its packaging.
1497
1498
3)
This exemption does not apply if the laboratory determines that the waste
1499
is hazardous but the laboratory is no longer meeting any of the conditions
1500
stated in subsection (d)(1) of this Section.
1501
1502
e)
Treatability study samples.
1503
1504
1)
Except as is provided in subsection (e)(2) of this Section, a person that
1505
generates or collects samples for the purpose of conducting treatability
1506
studies, as defined in 35 III. Adm. Code 720.110, are not subject to any
1507
requirement of 35 III. Adm. Code 721 through 723 or to the notification
1508
requirements of section 3010 of the Resource Conservation and Recovery
1509
Act. Nor are such samples included in the quantity determinations of
1510
Section 721.105 and 35 III. Adm. Code 722.134(d) when:
1511
1512
A)
The sample is being collected and prepared for transportation by
1513
the generator or sample collector;
1514
1515
B)
The sample is being accumulated or stored by the generator or
1516
sample collector prior to transportation to a laboratory or testing
1517
facility; or
1518
1519
C)
The sample is being transported to the laboratory or testing facility
1520
for the purpose of conducting a treatability study.
1521
1522
2)
The exemption in subsection (e)(1) of this Section is applicable to samples
1523
of hazardous waste being collected and shipped for the purpose of
1524
conducting treatability studies provided that the following conditions are
1525
fulfilled:
1526
1527
A)
The generator or sample collector uses (in "treatability studies") no
1528
more than 10,000 kg of media contaminated with non-acute
1529
hazardous waste, 1,000 kg of non-acute hazardous waste other than
1530
contaminated media, 1 kg of acute hazardous waste, or 2,500 kg of
1531
media contaminated with acute hazardous waste for each process
1532
being evaluated for each generated waste stream;
1533
1534
B)
The mass of each shipment does not exceed 10,000 kg; the 10,000
1535
kg quantity may be all media contaminated with non-acute
JCAR350721-0805030r01
1536
hazardous waste, or may include 2,500 kg of media contaminated
1537
with acute hazardous waste, 1,000 kg of hazardous waste, and 1 kg
1538
of acute hazardous waste;
1539
1540
C)
The sample must be packaged so that it does not leak, spill, or
1541
vaporize from its packaging during shipment and the requirements
1542
of subsection (e)(2)(C)(i) or (e)(2)(C)(ii) of this Section are met.
1543
1544
i)
The transportation of each sample shipment complies with
1545
U.S. Department of Transportation (USDOT), U.S. Postal
1546
Service (USPS), or any other applicable shipping
1547
requirements; or
1548
1549
ii)
If the USDOT, USPS, or other shipping requirements do
1550
not apply to the shipment of the sample, the following
1551
information must accompany the sample: The name,
1552
mailing address, and telephone number of the originator of
1553
the sample; the name, address, and telephone number of the
1554
facility that will perform the treatability study; the quantity
1555
of the sample; the date of the shipment; and, a description
1556
of the sample, including its USEPA hazardous waste
1557
number;
1558
1559
D)
The sample is shipped to a laboratory or testing facility that is
1560
exempt under subsection (1) of this Section, or has an appropriate
1561
RCRA permit or interim status;
1562
1563
E)
The generator or sample collector maintains the following records
1564
for a period ending three years after completion of the treatability
1565
study:
1566
1567
i)
Copies of the shipping documents;
1568
1569
ii)
A copy of the contract with the facility conducting the
1570
treatability study; and
1571
1572
iii)
Documentation showing the following: The amount of
1573
waste shipped under this exemption; the name, address, and
1574
USEPA identification number of the laboratory or testing
1575
facility that received the waste; the date the shipment was
1576
made; and whether or not unused samples and residues
1577
were returned to the generator; and
1578
JCAR350721-0805030r01
1579
F)
The generator reports the information required in subsection
1580
(e)(2)(E)(iii) of this Section in its report under 35 III. Adm. Code
1581
722.141.
1582
1583
3)
The Agency may grant requests on a case-by-case basis for up to an
1584
additional two years for treatability studies involving bioremediation. The
1585
Agency may grant requests, on a case-by-case basis, for quantity limits in
1586
excess of those specified in subsections (e)(2)(A), (e)(2)(B), and (0(4) of
1587
this Section, for up to an additional 5,000 kg of media contaminated with
1588
non-acute hazardous waste, 500 kg of non-acute hazardous waste, 2,500
1589
kg of media contaminated with acute hazardous waste, and 1 kg of acute
1590
hazardous waste under the circumstances set forth in either subsection
1591
(e)(3)(A) or (e)(3)(B) of this Section, subject to the limitations of
1592
subsection (e)(3)(C) of this Section:
1593
1594
A)
In response to requests for authorization to ship, store, and conduct
1595
further treatability studies on additional quantities in advance of
1596
commencing treatability studies. Factors to be considered in
1597
reviewing such requests include the nature of the technology, the
1598
type of process (e.g., batch versus continuous), the size of the unit
1599
undergoing testing (particularly in relation to scale-up
1600
considerations), the time or quantity of material required to reach
1601
steady-state operating conditions, or test design considerations,
1602
such as mass balance calculations.
1603
1604
B)
In response to requests for authorization to ship, store, and conduct
1605
treatability studies on additional quantities after initiation or
1606
completion of initial treatability studies when the following occurs:
1607
There has been an equipment or mechanical failure during the
1608
conduct of the treatability study, there is need to verify the results
1609
of a previously-conducted treatability study, there is a need to
1610
study and analyze alternative techniques within a previously-
1611
evaluated treatment process, or there is a need to do further
1612
evaluation of an ongoing treatability study to determine final
1613
specifications for treatment.
1614
1615
C)
The additional quantities allowed and timeframes allowed in
1616
subsections (e)(3)(A) and (e)(3)(B) of this Section are subject to all
1617
the provisions in subsections (e)(1) and (e)(2)(B) through (e)(2)(F)
1618
of this Section. The generator or sample collector must apply to
1619
the Agency and provide in writing the following information:
1620
1621
i)
The reason why the generator or sample collector requires
JCAR350721-0805030r01
1622
additional time or quantity of sample for the treatability
1623
study evaluation and the additional time or quantity needed;
1624
1625
Documentation accounting for all samples of hazardous
1626
waste from the waste stream that have been sent for or
1627
undergone treatability studies, including the date each
1628
previous sample from the waste stream was shipped, the
1629
quantity of each previous shipment, the laboratory or
1630
testing facility to which it was shipped, what treatability
1631
study processes were conducted on each sample shipped,
1632
and the available results of each treatability study;
1633
1634
iii)
A description of the technical modifications or change in
1635
specifications that will be evaluated and the expected
1636
results;
1637
1638
iv)
If such further study is being required due to equipment or
1639
mechanical failure, the applicant must include information
1640
regarding the reason for the failure or breakdown and also
1641
include what procedures or equipment improvements have
1642
been made to protect against further breakdowns; and
1643
1644
v)
Such other information as the Agency determines is
1645
necessary.
1646
1647
4)
Final Agency determinations pursuant to this subsection (e) may be
1648
appealed to the Board.
1649
1650
0
Samples undergoing treatability studies at laboratories or testing facilities.
1651
Samples undergoing treatability studies and the laboratory or testing facility
1652
conducting such treatability studies (to the extent such facilities are not otherwise
1653
subject to RCRA requirements) are not subject to any requirement of this Part, or
1654
of 35 Ill. Adm. Code 702, 703, 722 through 726, and 728 or to the notification
1655
requirements of Section 3010 of the Resource Conservation and Recovery Act,
1656
provided that the requirements of subsections (0(1) through (0(11) of this Section
1657
are met. A mobile treatment unit may qualify as a testing facility subject to
1658
subsections (0(1) through (0(11) of this Section. Where a group of mobile
1659
treatment units are located at the same site, the limitations specified in subsections
1660
(f)(1) through (0(11) of this Section apply to the entire group of mobile treatment
1661
units collectively as if the group were one mobile treatment unit.
1662
1663
1)
No less than 45 days before conducting treatability studies, the facility
1664
notifies the Agency in writing that it intends to conduct treatability studies
JCAR350721-0805030r01
1665
under this subsection (f).
1666
1667
2)
The laboratory or testing facility conducting the treatability study has a
1668
USEPA identification number.
1669
1670
3)
No more than a total of 10,000 kg of "as received" media contaminated
1671
with non-acute hazardous waste, 2,500 kg of media contaminated with
1672
acute hazardous waste, or 250 kg of other "as received" hazardous waste is
1673
subject to initiation of treatment in all treatability studies in any single
1674
day. "As received" waste refers to the waste as received in the shipment
1675
from the generator or sample collector.
1676
1677
4)
The quantity of "as received" hazardous waste stored at the facility for the
1678
purpose of evaluation in treatability studies does not exceed 10,000 kg, the
1679
total of which can include 10,000 kg of media contaminated with non-
1680
acute hazardous waste, 2,500 kg of media contaminated with acute
1681
hazardous waste, 1,000 kg of non-acute hazardous wastes other than
1682
contaminated media, and 1 kg of acute hazardous waste. This quantity
1683
limitation does not include treatment materials (including non-hazardous
1684
solid waste) added to "as received" hazardous waste.
1685
1686
5)
No more than 90 days have elapsed since the treatability study for the
1687
sample was completed, or no more than one year (two years for
1688
treatability studies involving bioremediation) has elapsed since the
1689
generator or sample collector shipped the sample to the laboratory or
1690
testing facility, whichever date first occurs. Up to 500 kg of treated
1691
material from a particular waste stream from treatability studies may be
1692
archived for future evaluation up to five years from the date of initial
1693
receipt. Quantities of materials archived are counted against the total
1694
storage limit for the facility.
1695
1696
6)
The treatability study does not involve the placement of hazardous waste
1697
on the land or open burning of hazardous waste.
1698
1699
7)
The facility maintains records for three years following completion of
1700
each study that show compliance with the treatment rate limits and the
1701
storage time and quantity limits. The following specific information must
1702
be included for each treatability study conducted:
1703
1704
A)
The name, address, and USEPA identification number of the
1705
generator or sample collector of each waste sample;
1706
1707
B)
The date the shipment was received;
JCAR350721-0805030r01
1708
1709
C)
The quantity of waste accepted;
1710
1711
D)
The quantity of "as received" waste in storage each day;
1712
1713
E)
The date the treatment study was initiated and the amount of "as
1714
received" waste introduced to treatment each day;
1715
1716
F)
The date the treatability study was concluded;
1717
1718
G)
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
9)
The facility prepares and submits a report to the Agency, by March 15 of
1729
each year, that
1730
expected to be used in trqatability studies during the current y ar, and
1731
includes the following information for the previous calendar year:
1732
1733
A)
The name, address, and USEPA identification number of the
1734
facility conducting the treatability studies;
1735
1736
B)
The types (by process) of treatability studies conducted;
1737
1738
C)
The names and addresses of persons for whom studies have been
1739
conducted (including their USEPA identification numbers);
1740
1741
D)
The total quantity of waste in storage each day;
1742
1743
E)
The quantity and types of waste subjected to treatability studies;
1744
1745
F)
When each treatability study was conducted; and
1746
1747
G)
The final disposition of residues and unused sample from each
1748
treatability study.
1749
1750
10)
The facility determines whether any unused sample or residues generated
The date any unused sample or residues generated from the
treatability study were returned to the generator or sample collector
or, if sent to a designated facility, the name of the facility and the
USEPA identification number.
8)
The facility keeps, on-site, a copy of the treatability study contract and all
shipping papers associated with the transport of treatability study samples
to and from the facility for a period ending three years from the
completion date of each treatability study.
JCAR350721-0805030r01
1751
by the treatability study are hazardous waste under Section 721.103 and, if
1752
so, are subject to 35 III. Adm. Code 702, 703, and 721 through 728, unless
1753
the residues and unused samples are returned to the sample originator
1754
under the exemption of subsection (e) of this Section.
1755
1756
11)
The facility notifies the Agency by letter when the facility is no longer
1757
planning to conduct any treatability studies at the site.
1758
1759
g)
Dredged material that is not a hazardous waste. Dredged material that is subject
1760
to the requirements of a permit that has been issued under section 404 of the
1761
Federal Water Pollution Control Act (33 USC 1344) is not a hazardous waste.
1762
For the purposes of this subsection (g), the following definitions apply:
1763
1764
"Dredged material" has the meaning ascribed it in 40 CFR 232.2
1765
(Definitions), incorporated by reference in 35 Ill. Adm. Code 720.111(b).
1766
1767
"Permit" means any of the following:
1768
1769
A permit issued by the U.S. Army Corps of Engineers (Army
1770
Corps) under section 404 of the Federal Water Pollution Control
1771
Act (33 USC 1344);
1772
1773
A permit issued by the Army Corps under section 103 of the
1774
Marine Protection, Research, and Sanctuaries Act of 1972 (33
1775
USC 1413); or
1776
1777
In the case of Army Corps civil works projects, the administrative
1778
equivalent of the permits referred to in the preceding two
1779
paragraphs of this definition, as provided for in Army Corps
1780
regulations (for example, see 33 CFR 336.1, 336.2, and 337.6).
1781
1782
(Source: Amended at 32 Ill. Reg.
, effective
)
1783
1784
SUBPART C: CHARACTERISTICS OF HAZARDOUS WASTE
1785
1786
Section 721.121 Characteristic of Ignitability
1787
1788
a)
A solid waste exhibits the characteristic of ignitability if a representative sample
1789
of the waste has any of the following properties:
1790
1791
1)
It is a liquid, other
than an aqueous solution containing less than 24
1792
percent
alcohol by volume, and has a flash point less than 60° C (140° F),
1793
as determined
by a Pensky-Martens Closed Cup Tester, using the test
JCAR350721-0805030r01
1794
method specified in ASTM D 93-85 (Standard Test Methods for Flash
1795
Point by Pensky-Martens Closed Tester), or a Setaflash Closed Cup
1796
Tester, using the test method specified in ASTM D 3828-87, (Standard
1797
Test Methods for Flash Point of Liquids by Setaflash Closed Tester), each
1798
incorporated by reference in 35 Ill. Adm. Code 720.111(a).
1799
1800
2)
It is not a liquid and is capable, under standard temperature and pressure,
1801
of causing fire through friction, absorption of moisture or spontaneous
1802
chemical changes and, when ignited, bums so vigorously and persistently
1803
that it creates a hazard.
1804
1805
3)
It is a flammable gas, as defined in federal 49 CFR 173.115 (Class 2,
1806
Divisions 2.1, 2.2, and 2.3 – Definitions)„ incorporated by reference in 35
1807
III. Adm. Code 720.111(b), and as determined by the test methods
1808
described in that regulation or equivalent test methods approved by the
1809
Board (35 III. Adm. Code 720.120).
1810
1811
BOARD NOTE: Corresponding 40 CFR 261.21(a)(3) uses "ignitable
1812
compressed gas" based on the outmoded USDOT hazard class cites to 49
1813
CFR 173.300 for a definition of "flammableignitable compressed gas,",
1814
and it replicates the text from former 49 CFR 173.300(b) (1980) for the
1815
definition. In 1990, • .
: • •
USDOT, and it is
1816
marked "reserved." replaced that former hazard class with "flammable
1817
gas", as defined at 49 CFR 173.115 now defines a "flammable ;as" as a
1818
Di4sion-2,1-material. See 55 Fed. Reg. 52402, 53433 (December 21,
1819
1990) (USDOT rulemaking replacing the old hazard class with the new
1820
one). The Board has chosen to avoid major problems inherent to USEPA's
1821
approach (the use of obsolete methods and USDOT regulatory
1822
mechanisms for the outmoded hazard class). The Board has instead
1823
updated the Illinois provision to correspond with the current USDOT
1824
regulations and use the "flammable gas" hazard class, together with its
1825
associated current methods.
1826
1827
4)
It is an oxidizer, as defined in federal 49 CFR 173.127 (Class 5, Division
1828
5.1 – Definition and Assignment of Packaging Groups), incorporated by
1829
reference in 35 Ill. Adm. Code 720.111(b).
1830
1831
BOARD NOTE: Corresponding 40 CFR 261.21 cites to 49 CFR 173.151
1832
for a definition of "oxidizer." 49 CFR 173.127 classifies an oxidizer as a
1833
Division 5.1 material. The Board has updated the Illinois provision to
1834
correspond with the current USDOT regulations.
1835
1836
b)
A solid waste that exhibits the characteristic of ignitability has the USEPA
JCAR350721-0805030r01
1837
hazardous waste number of D001.
1838
1839
(Source: Amended at 32 Ill. Reg.
, effective
)
1840
1841
SUBPART D: LISTS OF HAZARDOUS WASTE
1842
1843
Section
721.131
Hazardous Wastes from Nonspecific Sources
1844
1845
a)
The following solid wastes are listed hazardous wastes from non-specific sources,
1846
unless they are excluded under 35 Ill. Adm. Code 720.120 and 720.122 and listed
1847
in Appendix I of this Part.
1848
USEPA
Hazardous
Hazard
Waste No.
Industry and Hazardous Waste
Code
F001
The following spent halogenated solvents used in
(T)
degreasing: tetrachloroethylene, trichloroethylene,
methylene chloride, 1,1,1-trichloroethane, carbon
tetrachloride, and chlorinated fluorocarbons; all spent
solvent mixtures and blends used in degreasing
containing, before use, a total of ten percent or more (by
volume) of one or more of the above halogenated solvents
or those solvents listed in F002, F004, or F005; and still
bottoms from the recovery of these spent solvents and
spent solvent mixtures.
F002
The following spent halogenated solvents:
(T)
tetrachloroethylene, methylene chloride, trichloroethylene,
1,1,1-trichloroethane, chlorobenzene, 1,1,2-trichloro-
1,2,2-trifluoroethane, orthodichlorobenzene,
trichlorofluoromethane, and 1,1,2-trichloroethane; all
spent solvent mixtures and blends containing, before use, a
total of ten percent or more (by volume) of one or more
of the above halogenated solvents or those solvents listed
in F001, F004, or F005; and still bottoms from the
recovery of these spent solvents and spent solvent
mixtures.
F003
The following spent non-halogenated solvents: xylene,
(I)
acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl
isobutyl ketone, n-butyl alcohol, cyclohexanone, and
methanol; all spent solvent mixtures and blends
JCAR350721-0805030r01
containing, before use, only the above spent non-
halogenated solvents; and all spent solvent mixtures and
blends containing, before use, one or more of the above
non-halogenated solvents and a total of ten percent or
more (by volume) of one or more of those solvents listed
in F001, F002, F004, or F005; and still bottoms from the
recovery of these spent solvents and spent solvent
mixtures.
F004
The following spent non-halogenated solvents: cresols
(T)
and cresylic acid and nitrobenzene; all spent solvent
mixtures and blends containing, before use, a total of ten
percent or more (by volume) of one or more of the above
non-halogenated solvents or those solvents listed in F001,
F002, or F005; and still bottoms from the recovery of
these spent solvents and spent solvent mixtures.
F005
The following spent non-halogenated solvents: toluene,
(I, T)
methyl ethyl ketone, carbon disulfide, isobutanol,
pyridine, benzene, 2-ethoxyethanol, and 2-nitropropane;
all spent solvent mixtures and blends, containing, before
use, a total of ten percent or more (by volume) of one or
more of the above non-halogenated solvents or those
solvents listed in F001, F002, or F004; and still bottoms
from the recovery of these spent solvents and spent
solvent mixtures.
F006
Wastewater treatment sludges from electroplating
(T)
operations except from the following processes: (1)
sulfuric acid anodizing of aluminum; (2) tin plating on
carbon steel; (3) zinc plating (segregated basis) on carbon
steel; (4) aluminum or zinc-aluminum plating on carbon
steel; (5) cleaning/stripping associated with tin, zinc, and
aluminum plating on carbon steel; and (6) chemical
etching and milling of aluminum.
F007
Spent cyanide plating bath solutions from electroplating
(R, T)
operations.
F008
Plating bath residues from the bottom of plating baths
(R, T)
from electroplating operations where cyanides are used in
the process.
JCAR350721-0805030r01
F009
Spent stripping and cleaning bath solutions from
(R, T)
electroplating operations where cyanides are used in the
process.
F010
Quenching bath residues from oil baths from metal heat-
(R, T)
treating operations where cyanides are used in the process.
F011
Spent cyanide solutions from salt bath pot cleaning from
(R, T)
metal heat-treating operations.
F012
Quenching wastewater treatment sludges from metal heat-
(T)
treating operations where cyanides are used in the
process.
F019
Wastewater treatment sludges from the chemical
(T)
conversion coating of aluminum except from zirconium
phosphating in aluminum can washing when such
phosphating is an exclusive conversion coating process.
F020
Wastes (except wastewater and spent carbon from
(H)
hydrogen chloride purification) from the production or
manufacturing use (as a reactant, chemical intermediate or
component in a formulating process) of tri- or
tetrachlorophenol or of intermediates used to produce their
pesticide derivatives. (This listing does not include wastes
from the production of hexachlorophene from highly
purified 2,4,5-trichlorophenol.)
F021
Wastes (except wastewater and spent carbon from
(H)
hydrogen chloride purification) from the production or
manufacturing use (as a reactant, chemical intermediate or
component in a formulating process) of pentachlorophenol
or of intermediates used to produce its derivatives.
F022
Wastes (except wastewater and spent carbon from
(H)
hydrogen chloride purification) from the manufacturing
use (as a reactant, chemical intermediate or component in
a formulating process) of tetra-, penta-, or
hexachlorobenzenes under alkaline conditions.
JCAR350721-0805030r01
F023
Wastes (except wastewater and spent carbon from
(H)
hydrogen chloride purification) from the production of
materials on equipment previously used for the production
or manufacturing use (as a reactant, chemical intermediate
or component in a formulating process) of tri- and
tetrachlorophenols. (This listing does not include wastes
from equipment used only for the production or use of
hexachlorophene from highly purified 2,4,5-
trichlorophenol.)
F024
Process wastes, including but not limited to, distillation
(T)
residues, heavy ends, tars, and reactor cleanout wastes,
from the production of certain chlorinated aliphatic
hydrocarbons by free radical catalyzed processes. These
chlorinated aliphatic hydrocarbons are those having
carbon chain lengths ranging from one to and including
five, with varying amounts and positions of chlorine
substitution. (This listing does not include wastewaters,
wastewater treatment sludges, spent catalysts, and wastes
listed in this Section or in Section 721.132.)
F025
Condensed light ends, spent filters and filter aids, and
(T)
spent desiccant wastes from the production of certain
chlorinated aliphatic hydrocarbons by free radical
catalyzed processes. These chlorinated aliphatic
hydrocarbons are those having carbon chain lengths
ranging from one to and including five, with varying
amounts and positions of chlorine substitution.
F026
Wastes (except wastewater and spent carbon from
(H)
hydrogen chloride purification) from the production of
materials on equipment previously used for the
manufacturing use (as a reactant, chemical intermediate,
or component in a formulating process) of tetra-, penta-, or
hexachlorobenzene under alkaline conditions.
F027
Discarded unused formulations containing tri-, tetra- or
(H)
pentachlorophenol or discarded unused formulations
containing compounds derived from these chlorophenols.
(This listing does not include formulations containing
hexachlorophene synthesized from prepurified 2,4,5-
trichlorophenol as the sole component.)
JCAR350721-0805030r01
F028
Residues resulting from the incineration or thermal
(T)
treatment of soil contaminated with hazardous waste
numbers F020, F021, F022, F023, F026, and F027.
F032
Wastewaters (except those that have not come into contact
(T)
with process contaminants), process residuals,
preservative drippage, and spent formulations from wood
preserving processes generated at plants that currently use
or have previously used chlorophenolic formulations
(except potentially cross-contaminated wastes that have
had the F032 waste code deleted in accordance with
Section 721.135 and where the generator does not resume
or initiate use of chlorophenolic formulations). This
listing does not include K001 bottom sediment sludge
from the treatment of wastewater from wood preserving
processes that use creosote or pentachlorophenol.
F034
Wastewaters (except those that have not come into contact
(T)
with process contaminants), process residuals,
preservative drippage, and spent formulations from wood
preserving processes generated at plants that use creosote
formulations. This listing does not include K001 bottom
sediment sludge from the treatment of wastewater from
wood preserving processes that use creosote or
pentachlorophenol.
F035
Wastewaters, (except those that have not come into
(T)
contact with process contaminants), process residuals,
preservative drippage, and spent formulations from wood
preserving processes generated at plants that use
inorganic preservatives containing arsenic or chromium.
This listing does not include K001 bottom sediment
sludge from the treatment of wastewater from wood
preserving processes that use creosote or
pentachlorophenol.
JCAR350721-0805030r01
F037
Petroleum refinery primary oil/water/solids separation
(T)
sludge – Any sludge generated from the gravitational
separation of oil/water/solids during the storage or
treatment of process wastewaters and oily cooling
wastewaters from petroleum refineries. Such sludges
include, but are not limited to, those generated in:
oil/water/solids separators; tanks and impoundments;
ditches and other conveyances; sumps; and stormwater
units receiving dry weather flow. Sludge generated in
stormwater units that do not receive dry weather flow,
sludge generated from non-contact once-through cooling
waters segregated for treatment from other process or oily
cooling waters, sludge generated in aggressive biological
treatment units as defined in subsection (b)(2) of this
Section (including sludge generated in one or more
additional units after wastewaters have been treated in
aggressive biological treatment units), and K051 wastes
are not included in this listing. This listing does include
residuals generated from processing or recycling oil-
bearing hazardous secondary materials excluded under
Section 721.104(a)(12)(A) if those residuals are to be
disposed of.
F038
Petroleum refinery secondary (emulsified) oil/water/solids
(T)
separation sludge – Any sludge or float generated from the
physical or chemical separation of oil/water/solids in
process wastewaters and oily cooling wastewaters from
petroleum refineries. Such wastes include, but are not
limited to, all sludges and floats generated in the following
types of units: induced air floatation (IAF) units, tanks
and impoundments, and all sludges generated in dissolved
air flotation (DAF) units. Sludges generated in
stormwater units that do not receive dry weather flow,
sludges generated from non-contact once-through cooling
waters segregated for treatment from other process or oily
cooling waters, sludges and floats generated in aggressive
biological treatment units as defined in subsection (b)(2)
of this Section (including sludges and floats generated in
one or more additional units after wastewaters have been
treated in aggressive biological treatment units), F037,
K048, and K051 wastes are not included in this listing.
F039
Leachate (liquids that have percolated through land
(T)
JCAR350721-0805030r01
disposed wastes) resulting from the disposal of more than
one restricted waste classified as hazardous under Subpart
D. (Leachate resulting from the disposal of one or more of
the following USEPA hazardous wastes and no other
hazardous wastes retains its USEPA hazardous waste
number(s): F020, F021, F022, F026, F027, or F028.)
1849
1850
BOARD NOTE: The primary hazardous properties of these materials have been
1851
indicated by the letters T (Toxicity), R (Reactivity), I (Ignitability), and C
1852
(Corrosivity). The letter H indicates Acute Hazardous Waste. "(I, T)" should be
1853
used to specify mixtures that are ignitable and contain toxic constituents.
1854
1855 b)
Listing-specific definitions.
1856
1857
1)
For the purpose of the F037 and F038 listings, "oil/water/solids" is defined
1858
as oil or water or solids.
1859
1860
2)
For the purposes of the F037 and F038 listings, the following apply:
1861
1862
A)
"Aggressive biological treatment units" are defined as units that
1863
employ one of the following four treatment methods: activated
1864
sludge, trickling filter, rotating biological contactor for the
1865
continuous accelerated biological oxidation of wastewaters, or
1866
high-rate aeration. "High-rate aeration" is a system of surface
1867
impoundments or tanks in which intense mechanical aeration is
1868
used to completely mix the wastes, enhance biological activity, and
1869
the following is true:
1870
1871
i)
The units employ a minimum of six horsepower per million
1872
gallons of treatment volume; and either
1873
1874
The hydraulic retention time of the unit is no longer than
1875
five days; or
1876
1877
iii)
The hydraulic retention time is no longer than 30 days and
1878
the unit does not generate a sludge that is a hazardous waste
1879
by the toxicity characteristic.
1880
1881
B)
Generators and treatment, storage, or disposal (TSD) facilities have
1882
the burden of proving that their sludges are exempt from listing as
1883
F037 or F038 wastes under this definition. Generators and TSD
1884
facilities must maintain, in their operating or other on site records,
1885
documents and data sufficient to prove the following:
JCAR350721-0805030r01
1886
1887
The unit is an aggressive biological treatment unit, as
1888
defined in this subsection; and
1889
1890
The sludges sought to be exempted from F037 or F038
1891
were actually generated in the aggressive biological
1892
treatment unit.
1893
1894
3)
Time of generation. For the purposes of the designated waste, the "time of
1895
generation" is defined as follows:
1896
1897
A)
For the F037 listing, sludges are considered to be generated at the
1898
moment of deposition in the unit, where deposition is defined as at
1899
least a temporary cessation of lateral particle movement.
1900
1901
B)
For the F038 listing:
1902
1903
i)
Sludges are considered to be generated at the moment of
1904
deposition in the unit, where deposition is defined as at
1905
least a temporary cessation of lateral particle movement;
1906
and
1907
1908
ii)
Floats are considered to be generated at the moment they
1909
are formed in the top of the unit.
1910
1911
(Source: Amended at 32 Ill. Reg.
, effective
)
1912
1913
Section
721.133
Discarded Commercial Chemical Products, Off-Specification Species,
1914
Container Residues, and Spill Residues Thereof
1915
1916
The following materials or items are hazardous wastes if and when they are discarded or
1917
intended to be discarded, as described in Section 721.102(a)(2)(A); when they are mixed with
1918
waste oil or used oil or other material and applied to the land for dust suppression or road
1919
treatment; when they are otherwise applied to the land in lieu of their original intended use or
1920
when they are contained in products that are applied to land in lieu of their original intended use;
1921
or when, in lieu of their original intended use, they are produced for use as (or as a component
1922
of) a fuel, distributed for use as a fuel, or burned as a fuel.
1923
1924
a)
Any commercial chemical product or manufacturing chemical intermediate
1925
having the generic name listed in subsection (e) or (1) of this Section.
1926
1927
b)
Any off-specification commercial chemical product or manufacturing chemical
1928
intermediate that, if it met specifications, would have the generic name listed in
JCAR350721-0805030r01
1929
subsection (e) or (f) of this Section.
1930
1931
c)
Any residue remaining in a container or inner liner removed from a container that
1932
has held any commercial chemical product or manufacturing chemical
1933
intermediate having the generic name listed in subsection (e) or (f) of this Section,
1934
unless the container is empty, as defined in Section 721.107(b)(3).
1935
1936
BOARD NOTE: Unless the residue is being beneficially used or reused;
1937
legitimately recycled or reclaimed; or accumulated, stored, transported, or treated
1938
prior to such use, reuse, recycling, or reclamation, the Board considers the residue
1939
to be intended for discard, and thus a hazardous waste. An example of a
1940
legitimate reuse of the residue would be where the residue remains in the
1941
container and the container is used to hold the same commercial chemical product
1942
or manufacturing chemical intermediate it previously held. An example of the
1943
discard of the residue would be where the drum is sent to a drum reconditioner
1944
that reconditions the drum but discards the residue.
1945
1946
d)
Any residue or contaminated soil, water, or other debris resulting from the
1947
cleanup of a spill into or on any land or water of any commercial chemical
1948
product or manufacturing chemical intermediate having the generic name listed in
1949
subsection (e) or (f) of this Section or any residue or contaminated soil, water, or
1950
other debris resulting from the cleanup of a spill into or on any land or water of
1951
any off-specification chemical product or manufacturing chemical intermediate
1952
that, if it met specifications, would have the generic name listed in subsection (e)
1953
or (f) of this Section.
1954
1955
BOARD NOTE: The phrase "commercial chemical product or manufacturing
1956
chemical intermediate having the generic name listed in..." refers to a chemical
1957
substance that is manufactured or formulated for commercial or manufacturing
1958
use that consists of the commercially pure grade of the chemical, any technical
1959
grades of the chemical that are produced or marketed, and all formulations in
1960
which the chemical is the sole active ingredient. It does not refer to a material,
1961
such as a manufacturing process waste, that contains any of the substances listed
1962
in subsection (e) or (1) of this Section. Where a manufacturing process waste is
1963
deemed to be a hazardous waste because it contains a substance listed in
1964
subsection (e) or (f) of this Section, such waste will be listed in either Sections
1965
721.131 or 721.132 or will be identified as a hazardous waste by the
1966
characteristics set forth in Subpart C of this Part.
1967
1968
e)
The commercial chemical products, manufacturing chemical intermediates, or off-
1969
specification commercial chemical products or manufacturing chemical
1970
intermediates referred to in subsections (a) through (d) of this Section are
1971
identified as acute hazardous waste (H) and are subject to the small quantity
JCAR350721-0805030r01
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
exclusion defined in Section 721.105(e). These wastes and their corresponding
USEPA hazardous waste numbers are the following:
BOARD NOTE: For the convenience of the regulated community, the primary
hazardous properties of these materials have been indicated by the letters T
(Toxicity), and R (Reactivity). The absence of a letter indicates that the
compound is only listed for acute toxicity. Wastes are first listed in alphabetical
order by substance and then listed again in numerical order by USEPA hazardous
waste number.
USEPA
Hazardous
Waste No.
P023
P002
P057
P058
P002
P003
P070
P203
P004
P005
P006
P007
P008
P009
P119
P099
P010
P012
P011
P011
P012
P038
P036
P054
P067
P013
P024
P077
P028
Chemical
Abstracts No.
(CAS No.)
107-20-0
591-08-2
640-19-7
62-74-8
591-08-2
107-02-8
116-06-3
1646-88-4
309-00-2
107-18-6
20859-73-8
2763-96-4
504-24-5
131-74-8
7803-55-6
506-61-6
7778-39-4
1327-53-3
1303-28-2
1303-28-2
1327-53-3
692-42-2
696-28-6
151-56-4
75-55-8
542-62-1
106-47-8
100-01-6
100-44-7
Substance
Acetaldehyde, chloro-
Acetamide, N-(aminothioxomethyl)
Acetamide, 2-fluoro-
Acetic acid, fluoro-, sodium salt
1-Acetyl-2-thiourea
Acrolein
Aldicarb
Aldicarb sulfone
Aldrin
Allyl alcohol
Aluminum phosphide (R,T)
5-(Aminomethyl)-3-isoxazolol
4-Aminopyridine
Ammonium picrate (R)
Ammonium vanadate
Argentate(1-), bis(cyano-C)-, potassium
Arsenic acid H3Asa4
Arsenic oxide As2O3
Arsenic oxide As205
Arsenic pentoxide
Arsenic trioxide
Arsine, diethyl-
Arsonous dichloride, phenyl-
Aziridine
Aziridine, 2-methyl
Barium cyanide
Benzenamine, 4-chloro-
Benzenamine, 4-nitro-
Benzene, (chloromethyl)-
JCAR350721-0805030r01
PO42
51-43-4
1,2-Benzenediol, 4-(1-hydroxy-2-
(methylamino)ethyl) -, (R)-
PO46
122-09-8
Benzeneethanamine, a,a-dimethyl-
P014
108-98-5
Benzenethiol
P127
1563-66-2
7-Benzofuranol, 2,3-dihydro-2,2-d methyl-,
methylcarbamate
P188
57-64-7
Benzoic acid, 2-hydroxy-, compound with (3aS-
cis)-1,2,3,3a,8,8a-hexahydro-1,3a,8-
trimethylpyrrolo(2,3-b) indol-5-yl
methylcarbamate ester (1:1)
P001
81-81-2*
2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-
phenylbuty1)-, and salts, when present at
concentrations greater than 0.3 percent
P028
100-44-7
Benzyl chloride
P015
7440-41-7
Beryllium powder
P017
598-31-2
Bromoacetone
P018
357-57-3
Brucine
PO45
39196-18-6
2-Butanone,3,3-dimethy1-1-(methylthio)-, 0-
((methylamino)carbonyl) oxime
P021 592-01-8
Calcium cyanide
P021 592-01-8
Calcium cyanide Ca(CN)2
P189
55285-14-8
Carbamic acid, ((dibutylamino)- thio)methyl-,
2,3-dihydro-2,2-dimethyl-7-benzofuranyl ester
PI91
644-64-4
Carbamic acid, dimethyl-, 1-((dimethyl-
amino)carbonyl) -5-methyl-1H-pyrazol-3-y1
ester
P192
119-38-0
Carbamic acid, dimethyl-, 3-methy1-1 -(1 -
methylethyl)-1H-pyrazol-5-y1 ester
P190
1129-41-5
Carbamic acid, methyl-, 3-methylphenyl ester
P127
1563-66-2
Carbofuran
P022
75-15-0
Carbon disulfide
P095
75-44-5
Carbonic dichloride
P189
55285-14-8
Carbosulfan
P023
107-20-0
Chloroacetaldehyde
P024
106-47-8
p-Chloroaniline
P026
5344-82-1
1-(o-Chlorophenyl)thiourea
P027
542-76-7
3-Chloropropionitrile
P029
544-92-3
Copper cyanide
P029
544-92-3
Copper cyanide CuCN
P202
64-00-6
m-Cumenyl methylcarbamate
P030
Cyanides (soluble cyanide salts), not otherwise
specified
P031
460-19-5
Cyanogen
JCAR350721-0805030r01
P033
506-77-4
Cyanogen chloride
P033
506-77-4
Cyanogen chloride CNCI
P034
131-89-5
2-Cyclohexyl-4,6-dinitrophenol
P016
542-88-1
Dichloromethyl ether
P036
696-28-6
Dichlorophenylarsine
P037
60-57-1
Dieldrin
P038
692-42-2
Diethylarsine
PO41
311-45-5
Diethyl-p-nitrophenyl phosphate
PO40
297-97-2
0,0-Diethyl 0-pyrazinyl phosphorothioate
PO43
55-91-4
Diisopropylfluorophosphate (DFP)
P191
644-64-4
Dimetilan
P004
309-00-2
1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-
hexachloro-1,4,4a,5,8,8a-hexahydro-,
(1a,4a,443,5cc,8a,843)-
P060
465-73-6
1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-
hexachloro-1,4,4a,5,8,8a-hexahydro-,
(1a,4cc,4a13,513,813,8a(3)-
P037
60-57-1
2,7:3,6-Dimethanonaphth(2,3-b)oxirene,
3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-
octahydro-, (1 acc,213,2aa,313,6(3,6aa,713,7aa)-
P051
72-20-8*
2,7:3,6-Dimethanonaphth(2,3-b)oxirene,
3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-
octahydro-, (1aa,213,2a13,3a,6cc,64,7(3,7aoc)-,
and metabolites
PO44
60-51-5
Dimethoate
PO46
122-09-8
a,a-Dimethylphenethylamine
PO47
534-52-1
4,6-Dinitro-o-cresol and salts
PO48
51-28-5
2,4-Dinitrophenol
P020
88-85-7
Dinoseb
P085
152-16-9
Diphosphoramide, octamethyl-
P111
107-49-3
Diphosphoric acid, tetraethyl ester
P039
298-04-4
Disulfoton
PO49
541-53-7
Dithiobiuret
P185
26419-73-8
1,3-Dithiolane-2-carboxaldehyde, 2,4-dimethyl-,
O-((methylamino)- carbonyl)oxime
P050
115-29-7
Endosulfan
P088
145-73-3
Endothall
P051
72-20-8
Endrin
P051
72-20-8
Endrin, and metabolites
PO42
51-43-4
Epinephrine
P031
460-19-5
Ethanedinitrile
JCAR350721-0805030r01
P194
23135-22-0
Ethanimidothioicleariee acid, 2-
(dimethylamino)-N-
(((methylamino)carbonyl)oxy)-2-oxo-, methyl
ester
P066
16752-77-5
Ethanimidothioic acid, N-
(((methylamino)carbonyl)oxy)-, methyl ester
P101
107-12-0
Ethyl cyanide
P054
151-56-4
Ethylenimine
P097
52-85-7
Famphur
P056
7782-41-4
Fluorine
P057
640-19-7
Fluoroacetamide
P058
62-74-8
Fluoroacetic acid, sodium salt
P198
23422-53-9
Formetanate hydrochloride
P197
17702-57-7
Formparanate
P065
628-86-4
Fulminic acid, mercury (2+) salt (R, T)
P059
76-44-8
Heptachlor
P062
757-58-4
Hexaethyl tetraphosphate
P116
79-19-6
Hydrazinecarbothioamide
P068
60-34-4
Hydrazine, methyl-
P063
74-90-8
Hydrocyanic acid
P063
74-90-8
Hydrogen cyanide
P096
7803-51-2
Hydrogen phosphide
P060
465-73-6
Isodrin
P192
119-38-0
Isolan
P202
64-00-6
3-Isopropylphenyl-N-methylcarbamate
P007
2763-96-4
3(2H)-Isoxazolone, 5-(aminomethyl)-
P196
15339-36-3
Manganese, bis(dimethylcarbamodithioato-S,S')-
P196
15339-36-3
Manganese dimethyldithiocarbamate
P092
62-38-4
Mercury, (acetato-O)phenyl-
P065
628-86-4
Mercury fulminate (R, T)
P082
62-75-9
Methanamine, N-methyl-N-nitroso-
P064
624-83-9
Methane, isocyanato-
P016
542-88-1
Methane, oxybis(chloro-
P112
509-14-8
Methane, tetranitro- (R)
P118
75-70-7
Methanethiol, trichloro-
P198
23422-53-9
Methanimidamide, N,N-dimethyl-N'-[3-((
(methylamino)-carbonyl)oxy)]phenyl)-,
monohydrochloride
P197
17702-57-7
Methanimidamide, N,N-dimethyl-N'-(2-methyl-
4-(((methylamino)carbonyl)oxy)pheny1)-
P199
2032-65-7
Methiocarb
JCAR350721-0805030r01
P050 115-29-7 6,9-Methano-2,4,3-benzodioxathiepen,
6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-
hexahydro-, 3-oxide
P059
76-44-8
4,7-Methano-1H-indene, 1,4,5,6,7,8,8-
heptachloro-3a,4,7,7a-tetrahydro-
P066
16752-77-5
Methomyl
P068
60-34-4
Methyl hydrazine
P064
624-83-9
Methyl isocyanate
P069
75-86-5
2-Methyllactonitrile
P071
298-00-0
Methyl parathion
P190
1129-41-5
Metolcarb
P129
315-8-4
Mexacarbate
P072
86-88-4
a-Naphthylthiourea
P073
13463-39-3
Nickel carbonyl
P073
13463-39-3
Nickel carbonyl Ni(CO)
4
, (T-4)-
P074
557-19-7
Nickel cyanide
P074
557-19-7
Nickel cyanide Ni(CN)2
P075
54-11-5*
Nicotine, and salts
P076
10102-43-9
Nitric oxide
P077
100-01-6
p-Nitroaniline
P078
10102-44-0
Nitrogen dioxide
P076
10102-43-9
Nitrogen oxide NO
P078
10102-44-0
Nitrogen oxide NO2
P081
55-63-0
Nitroglycerine (R)
P082
62-75-9
N-Nitrosodimethylamine
P084
4549-40-0
N-Nitrosomethylvinylamine
P085
152-16-9
Octamethylpyrophosphoramide
P087
20816-12-0
Osmium oxide 050
4
, (T-4)-
P087
20816-12-0
Osmium tetroxide
P088
145-73-3
7-Oxabicyclo(2.2.1)heptane-2,3-dicarboxylic
acid
P194
23135-22-0
Oxamyl
P089
56-38-2
Parathion
P034
131-89-5
Phenol, 2-cyclohexyl-4,6-dinitro-
P128
315-18-4
Phenol, 4-(dimethylamino)-3,5-dimethyl-,
methylcarbamate (ester)
P199
2032-65-7
Phenol, (3,5-dimethyl-4-(methylthio)-,
methylcarbamate
PO48
51-28-5
Phenol, 2,4-dinitro-
PO47
534-52-1*
Phenol, 2-methyl-4,6-dinitro-, and salts
P202
64-00-6
Phenol, 3-(1-methylethyl)-, methyl carbamate
P201
2631-37-0
Phenol, 3-methyl-5-(1-methylethyl)-, methyl
carbamate
JCAR350721-0805030r01
P020
88-85-7
Phenol, 2-(1-methylpropy1)-4,6-dinitro-
P009
131-74-8
Phenol, 2,4,6-trinitro-, ammonium salt (R)
P092
62-38-4
Phenylmercury acetate
P093
103-85-5
Phenylthiourea
P094
298-02-2
Phorate
P095
75-44-5
Phosgene
P096
7803-51-2
Phosphine
PO41
311-45-5
Phosphoric acid, diethyl 4-nitrophenyl ester
P039
298-04-4
Phosphorodithioic acid, 0,0-diethyl S-(2-
(ethylthio)ethyl) ester
P094
298-02-2
Phosphorodithioic acid, 0,0-diethyl S-
((ethylthio)methyl) ester
PO44
60-51-5
Phosphorodithioic acid, 0,0-dimethyl S-(2-
(methylamino)-2-oxoethyl) ester
PO43
55-91-4
Phosphorofluoridic acid, bis(1-methylethyl)ester
P089
56-38-2
Phosphorothioic acid, 0,0-diethyl 044-
nitrophenyl) ester
PO40
297-97-2
Phosphorothioic acid, 0,0-diethyl 0-pyrazinyl
ester
P097
52-85-7
Phosphorothioic acid, 0-(4-
((dimethylamino)sulfony1)) phenyl) 0,0-
dimethyl ester
P071
298-00-0
Phosphorothioic acid, 0,0-dimethyl 0-(4-
nitrophenyl) ester
P204
57-47-6
Physostigmine
P188
57-64-7
Physostigmine salicylate
P110
78-00-2
Plumbane, tetraethyl-
P098
151-50-8
Potassium cyanide
P098
151-50-8
Potassium cyanide KCN
P099
506-61-6
Potassium silver cyanide
P201
2631-37-0
Promecarb
P203
1646-88-4
Propanal, 2-methyl-2-(methyl-sulfonyl)-, 0-
((methylamino)carbonyl) oxime
P070
116-06-3
Propanal, 2-methyl-2-(methylthio)-, 0-
((methylamino)carbonyl)oxime
P101
107-12-0
Propanenitrile
P027
542-76-7
Propanenitrile, 3-chloro-
P069
75-86-5
Propanenitrile, 2-hydroxy-2-methyl-
P081
55-63-0
1,2,3-Propanetriol, trinitrate- (R)
P017
598-31-2
2-Propanone, 1-bromo-
P102
107-19-7
Propargyl alcohol
P003
107-02-8
2-Propenal
P005
107-18-6
2-Propen-l-ol
JCAR350721-0805030r01
P067
75-55-8
1,2-Propylenimine
P102
107-19-7
2-Propyn-l-ol
P008
504-24-5
4-Pyridinamine
P075
54-11-5*
Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)- and
salts
P204
57-47-6
Pyrrolo(2,3-b)indol-5-ol, 1,2,3,3a,8,8a-
hexahydro-1,3a,8-trimethyl-, methylcarbamate
(ester), (3aS-cis)-
P114
12039-52-0
Selenious acid, dithallium (1+) salt
P103
630-10-4
Selenourea
P104
506-64-9
Silver cyanide
P104
506-64-9
Silver cyanide AgCN
P105
26628-22-8
Sodium azide
P106
143-33-9
Sodium cyanide
P106
143-33-9
Sodium cyanide NaCN
P108
57-24-9*
Strychnidin-10-one, and salts
P018
357-57-3
Strychnidin-10-one, 2,3-dimethoxy-
P108
57-24-9*
Strychnine and salts
P115
7446-18-6
Sulfuric acid, dithallium (1+) salt
P109
3689-24-5
Tetraethyldithiopyrophosphate
P110
78-00-2
Tetraethyl lead
P111
107-49-3
Tetraethylpyrophosphate
P112
509-14-8
Tetranitromethane (R)
P062
757-58-4
Tetraphosphoric acid, hexaethyl ester
P113
1314-32-5
Thallic oxide
P113
1314-32-5
Thallium oxide T1203
P114
12039-52-0
Thallium (I) selenite
P115
7446-18-6
Thallium (I) sulfate
P109
3689-24-5
Thiodiphosphoric acid, tetraethyl ester
PO45
39196-18-4
Thiofanox
PO49
541-53-7
Thioimidodicarbonic diamide ( (H
2
N)C(S)) 2NH
P014
108-98-5
Thiophenol
P116
79-19-6
Thiosemicarbazide
P026
5344-82-1
Thiourea, (2-chloropheny1)-
P072
86-88-4
Thiourea, 1-naphthalenyl-
P093
103-85-5
Thiourea, phenyl-
P123
8001-35-2
Toxaphene
P185
26419-73-8
Tirpate
P118
75-70-7
Trichloromethanethiol
P119
7803-55-6
Vanadic acid, ammonium salt
P120
1314-62-1
Vanadium oxide V205
P120
1314-62-1
Vanadium pentoxide
P084
4549-40-0
Vinylamine, N-methyl-N-nitroso-
JCAR350721-0805030r01
P001
81-81-2*
Warfarin, and salts, when present at
concentrations greater than 0.3 percent
P121
557-21-1
Zinc cyanide
P121
557-21-1
Zinc cyanide Zn(CN)2
P205
137-30-4
Zinc, bis(dimethylcarbamodithioato-S,S)-
P122
1314-84-7
Zinc phosphide Zn
3P2 , when present at
concentrations greater than 10 percent (R, T)
P205
137-30-4
Ziram
1982
1983
Numerical Listing
1984
USEPA
Chemical
Hazardous
Abstracts No.
Waste No.
(CAS No.)
Substance
1985
P001
81-81-2*
2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-l-
phenylbuty1)-, and salts, when present at
concentrations greater than 0.3 percent
P001
81-81-2.
Warfarin, and salts, when present at
concentrations greater than 0.3 percent
P002
591-08-2
Acetamide, N-(aminothioxomethyl)
P002
591-08-2
1-Acetyl-2-thiourea
P003
107-02-8
Acrolein
P003
107-02-8
2-Propenal
P004
309-00-2
Aldrin
P004
309-00-2
1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-
hexachloro-1,4,4a,5,8,8a-hexahydro-,
(1a,4cc,443,5a,8a,843)-
P005
107-18-6
Ally1 alcohol
P005
107-18-6
2-Propen-l-ol
P006
20859-73-8
Aluminum phosphide (R, T)
P007
2763-96-4
5-(Aminomethyl)-3-isoxazolol
P007
2763-96-4
3(2H)-Isoxazolone, 5-(aminomethyl)-
P008
504-24-5
4-Aminopyridine
P008
504-24-5
4-Pyridinamine
P009
131-74-8
Ammonium picrate
(R)
P009
131-74-8
Phenol, 2,4,6-trinitro-, ammonium salt (R)
P010
7778-39-4
Arsenic acid H3Asa4
P011
1303-28-2
Arsenic oxide As205
P011
1303-28-2
Arsenic pentoxide
P012
1327-53-3
Arsenic oxide As203
P012
1327-53-3
Arsenic trioxide
P013
542-62-1
Barium cyanide
JCAR350721-0805030r01
P014
?
108-98-5?
Benzenethiol
P014?
108-98-5?
Thiophenol
P015?
7440-41-7
?
Beryllium powder
P016?
542-88-1
?
Dichloromethyl ether
P016?
542-88-1?
Methane, oxybis(chloro-
P017
?
598-31-2?
Bromoacetone
P017
?
598-31-2?
2-Propanone, 1-bromo-
P018
?
357-57-3
?
Brucine
P018
?
357-57-3?
Strychnidin-10-one, 2,3-dimethoxy-
P020
?
88-85-7
?
Dinoseb
P020?
88-85-7?
Phenol, 2-(1-methylpropyI)-4,6-dinitro-
P021?
592-01-8
?
Calcium cyanide
P021?
592-01-8?
Calcium cyanide Ca(CN)2
P022
?
75-15-0?
Carbon disulfide
P023
?
107-20-0
?
Acetaldehyde, chloro-
P023?
107-20-0?
Chloroacetaldehyde
P024
?
106-47-8
?
Benzenamine, 4-chloro-
P024?
106-47-8?
p-Chloroaniline
P026?
5344-82-1
?
1-(o-Chlorophenyl)thiourea
P026?
5344-82-1
?
Thiourea, (2-chloropheny1)-
P027
?
542-76-7?
3-Chloropropionitrile
P027?
542-76-7
?
Propanenitrile, 3-chloro-
P028?
100-44-7
?
Benzene, (chloromethyl)-
P028?
100-44-7
?
Benzyl chloride
P029?
544-92-3?
Copper cyanide
P029?
544-92-3
?
Copper cyanide CuCN
P030?
Cyanides (soluble cyanide salts), not otherwise
specified
P031
?
460-19-5
?
Cyanogen
P031
?460-19-5?
Ethanedinitrile
P033?
506-77-4
?
Cyanogen chloride
P033?
506-77-4?
Cyanogen chloride CNCI
P034?
131-89-5
?
2-Cyclohexyl-4,6-dinitrophenol
P034?
131-89-5?
Phenol, 2-cyclohexyl-4,6-dinitro-
P036?
696-28-6
?
Arsonous dichloride, phenyl-
P036?
696-28-6?
Dichlorophenylarsine
P037?
60-57-1
?Dieldrin
P037?
60-57-1
?
2,7:3,6-Dimethanonaphth(2,3-b)oxirene,
3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-
octahydro-, (1 acc,2 [3,2acc,313,6[3,6aa,713,7aa)-
P038?
692-42-2?
Arsine, diethyl-
P038?
692-42-2
?
Diethylarsine
P039
?
298-04-4
?
Disulfoton
JCAR350721-0805030r01
P039
?
298-04-4
?
Phosphorodithioic acid, 0,0-diethyl S-(2-
(ethylthio)ethyl) ester
PO40?
297-97-2
?
0,0-Diethyl 0-pyrazinyl phosphorothioate
PO40?
297-97-2
?
Phosphorothioic acid, 0,0-diethyl 0-pyrazinyl
ester
PO41?311-45-5?
Diethyl-p-nitrophenyl phosphate
PO41?311-45-5?
Phosphoric acid, diethyl 4-nitrophenyl ester
PO42?
51-43-4
?
1,2-Benzenediol, 4-(1-hydroxy-2-
(methylamino)ethyl)-, (R)-
PO42?
51-43-4
?
Epinephrine
PO43?
55-91-4
?
Diisopropylfluorophosphate (DFP)
PO43?
55-91-4?
Phosphorofluoridic acid, bis(1-methylethyl)ester
PO44?
60-51-5
?
Dimethoate
PO44?
60-51-5?
Phosphorodithioic acid, 0,0-dimethyl S-(2-
(methylamino)-2-oxoethyl) ester
PO45?
39196-18-6
?
2-Butanone, 3,3-dimethyl-1-(methylthio)-, 0-
((methylamino)carbonyl) oxime
PO45?
39196-18-4?
Thiofanox
PO46?
122-09-8
?
Benzeneethanamine, a,a-dimethyl-
PO46?
122-09-8?
aa-Dimethylphenethylamine
PO47?
534-52-1*?
4,6-Dinitro-o-cresol and salts
PO47?
534-52-1*
?
Phenol, 2-methyl-4,6-dinitro-, and salts
PO48?
51-28-5?
2,4-Dinitrophenol
PO48?
51-28-5
?
Phenol, 2,4-dinitro-
PO49?
541-53-7?
Dithiobiuret
PO49?
541-53-7?
Thioimidodicarbonic diamide H N)C(S))2NH
P050?
115-29-7?
Endosulfan
P050 115-29-7 6,9-Methano-2,4,3-benzodioxathiepen,
6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-
hexahydro-, 3-oxide
P051?
72-20-8*?
2,7:3,6-Dimethanonaphth(2,3-b)oxirene,
3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-
octahydro-, (laa,213,24,3a,6a,64,70,7ac)-,
and metabolites
P051
?72-20-8?
Endrin
P051
?72-20-8?
Endrin, and metabolites
P054?
151-56-4
?
Aziridine
P054?
151-56-4
?
Ethylenimine
P056?
7782-41-4?
Fluorine
P057?
640-19-7
?
Acetamide, 2-fluoro-
P057?
640-19-7?
Fluoroacetamide
P058?
62-74-8?
Acetic acid, fluoro-, sodium salt
P058
?
62-74-8?
Fluoroacetic acid, sodium salt
JCAR350721-0805030r01
P059?
76-44-8
?
Heptachlor
P059
?
76-44-8?
4,7-Methano-1H-indene, 1,4,5,6,7,8,8-
heptachloro-3a,4,7,7a-tetrahydro-
P060
?
465-73-6?
1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-
hexachloro-1,4,4a,5,8,8a-hexahydro-,
(1a,4cc,4a13,513,813,84)-
P060
?
465-73-6?
Isodrin
P062
?
757-58-4?
Hexaethyl tetraphosphate
P062
?
757-58-4
?
Tetraphosphoric acid, hexaethyl ester
P063?
74-90-8?
Hydrocyanic acid
P063?
74-90-8?
Hydrogen cyanide
P064
?
624-83-9?
Methane, isocyanato-
P064
?
624-83-9?
Methyl isocyanate
P065
?
628-86-4
?
Fulminic acid, mercury (2+) salt (R, T)
P065?
628-86-4
?
Mercury fulminate (R, T)
P066
?
16752-77-5?
Ethanimidothioic acid, N-(((methylamino)-
carbonyl)oxy)-, methyl ester
P066?
16752-77-5?
Methomyl
P067
?
75-55-8?
Aziridine, 2-methyl
P067?
75-55-8?
1,2-Propylenimine
P068?
60-34-4
?
Hydrazine, methyl-
P068?
60-34-4
?
Methyl hydrazine
P069?
75-86-5
?
2-Methyllactonitrile
P069?
75-86-5?
Propanenitrile, 2-hydroxy-2-methyl-
P070?
116-06-3?
Aldicarb
P070
?
116-06-3?
Propanal, 2-methyl-2-(methylthio)-, 0-
((methylamino)carbonyl)oxime
P071?
298-00-0
?
Methyl parathion
P071
?298-00-0?
Phosphorothioic acid, 0,0-dimethyl 0-(4-
nitrophenyl) ester
P072?
86-88-4?
cc-Naphthylthiourea
P072?
86-88-4
?
Thiourea, 1-naphthalenyl-
P073?13463-39-3
?
Nickel carbonyl
P073?
13463-39-3?
Nickel carbonyl Ni(CO)4
, (T-4)-
P074?
557-19-7?
Nickel cyanide
P074?
557-19-7
?
Nickel cyanide Ni(CN)2
P075?
54-11-5*?
Nicotine and salts
P075?
54-11-5*
?
Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)- and
salts
P076?
10102-43-9?
Nitric oxide
P076?
10102-43-9?
Nitrogen oxide NO
P077?
100-01-6
?
Benzenamine, 4-nitro-
P077?
100-01-6?
p-Nitroaniline
JCAR350721-0805030r01
P078?
10102-44-0
?
Nitrogen dioxide
P078?10102-44-0?
Nitrogen oxide NO2
P081?55-63-0?
Nitroglycerine (R)
P081?55-63-0?
1,2,3-Propanetriol, trinitrate- (R)
P082?62-75-9?
Methanamine, N-methyl-N-nitroso-
P082
?
62-75-9?
N-Nitrosodimethylamine
P084?4549-40-0?
N-Nitrosomethylvinylamine
P084
?
4549-40-0
?
Vinylamine, N-methyl-N-nitroso-
P085?152-16-9?
Diphosphoramide, octamethyl-
P085?152-16-9?
Octamethylpyrophosphoramide
P087?20816-12-0?
Osmium oxide 0s0
4
, (T-4)-
P087?20816-12-0?
Osmium tetroxide
P088?145-73-3?
Endothall
P088?145-73-3?
7-Oxabicyclo(2.2.1)heptane-2,3-dicarboxylic
acid
P089?56-38-2?
Parathion
P089?56-38-2
?
Phosphorothioic acid, 0,0-diethyl 0-(4-
nitrophenyl) ester
P092?62-38-4?Mercury, (acetato-O)phenyl-
P092?62-38-4?
Phenylmercury acetate
P093?103-85-5?
Phenylthiourea
P093?103-85-5?
Thiourea phenyl-
P094?298-02-2?
Phorate
P094?
298-02-2
?
Phosphorodithioic acid, 0,0-diethyl S-
((ethylthio)methyl) ester
P095?75-44-5?
Carbonic dichloride
P095?75-44-5
?
Phosgene
P096?7803-51-2?
Hydrogen phosphide
P096
?
7803-51-2
?
Phosphine
P097?52-85-7
?Famphur
P097
?52-85-7?
Phosphorothioic acid, 044-
((dimethylamino)sulfonyl)phenyl) 0,0-dimethyl
ester
P098?151-50-8?
Potassium cyanide
P098?151-50-8?
Potassium cyanide KCN
P099?506-61-6?
Argentate(1-), bis(cyano-C), potassium
P099
?
506-61-6?
Potassium silver cyanide
P101
?107-12-0?
Ethyl cyanide
P101
?
107-12-0?
Propanenitrile
P102?107-19-7?
Propargyl alcohol
P102?107-19-7?
2-Propyn-l-ol
P103
?
630-10-4
?
Selenourea
P104?506-64-9?
Silver cyanide
JCAR350721-0805030r01
P104
?
506-64-9?
Silver cyanide AgCN
P105?
26628-22-8?
Sodium azide
P106
?
143-33-9?
Sodium cyanide
P106?
143-33-9?
Sodium cyanide NaCN
P108?
57-24-9*
?
Strychnidin-10-one, and salts
P108?
57-24-9*
?
Strychnine and salts
P109
?
3689-24-5
?
Tetraethyldithiopyrophosphate
P109
?
3689-24-5?
Thiodiphosphoric acid, tetraethyl ester
P110?
78-00-2?
Plumbane, tetraethyl-
P110
?
78-00-2?
Tetraethyl lead
P111?
107-49-3?
Diphosphoric acid, tetraethyl ester
P111?
107-49-3
?
Tetraethylpyrophosphate
P112
?
509-14-8?
Methane, tetranitro- (R)
P112?
509-14-8?
Tetranitromethane (R)
P113
?
1314-32-5?
Thallic oxide
P113?
1314-32-5
?
Thallium oxide T1,03
P114
?
12039-52-0?
Selenious acid, dithallium (1+) salt
P114?
12039-52-0
?
Thallium (I) selenite
P115
?
7446-18-6?
Sulfuric acid, dithallium (1+) salt
P115
?
7446-18-6
?
Thallium (I) sulfate
P116?
79-19-6?
Hydrazinecarbothioamide
P116
?
79-19-6
?
Thiosemicarbazide
P118?
75-70-7?
Methanethiol, trichloro-
P118?
75-70-7
?
Trichloromethanethiol
P119
?
7803-55-6?
Ammonium vanadate
P119
?
7803-55-6
?
Vanadic acid, ammonium salt
P120?
1314-62-1
?
Vanadium oxide V205
P120?
1314-62-1?
Vanadium pentoxide
P121
?
557-21-1?
Zinc cyanide
P121
?557-21-1
?
Zinc cyanide Zn(CN)2
P122
?
1314-84-7
?
Zinc phosphide Zn
3 P2
, when present at
concentrations greater than 10 percent (R, T)
P123
?
8001-35-2
?
Toxaphene
P127?
1563-66-2?
7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-,
methylcarbamate
P127?
1563-66-2?
Carbofuran
P128
?
315-18-4
?
Phenol, 4-(dimethylamino)-3,5-dimethyl-,
methylcarbamate (ester)
P129?
315-8-4?
Mexacarbate
P185?
26419-73-8?
1,3-Dithiolane-2-carboxaldehyde, 2,4-dimethyl-,
O-((methylamino)- carbonyl)oxime
P185
?
26419-73-8
?
Tirpate
JCAR350721-0805030r01
P188?57-64-7?
Benzoic acid, 2-hydroxy-, compound with (3aS-
cis)-1,2,3,3a,8,8a-hexahydro-1,3a,8-
trimethylpyrrolo(2,3-b)indo1-5-y1
methylcarbamate ester (1:1)
P188?
57-64-7
?
Physostigmine salicylate
P189?55285-14-8
?
Carbamic acid, ((dibutylamino)- thio)methyl-,
2,3-dihydro-2,2-dimethy1-7-benzofuranyl ester
P189
?55285-14-8?
Carbosulfan
P190?
1129-41-5
?
Carbamic acid, methyl-, 3-methylphenyl ester
P190?
1129-41-5?
Metolcarb
P191?
644-64-4?
Carbamic acid, dimethyl-, 1-((dimethyl-
amino)carbony1)-5-methyl-1H-pyrazol-3-y1 ester
P191
?644-64-4?
Dimetilan
P192?
119-38-0
?
Carbamic acid, dimethyl-, 3-methy1-1-(1-
methylethyl)-1H-pyrazol-5-y1 ester
P192?119-38-0?
Isolan
P194 23135-22-0 Ethanimidothioic acid, 2-(dimethylamino)-N-
(((methylamino)carbonyl)oxy)-2-oxo-, methyl
ester
P194?23135-22-0
?
Oxamyl
P196
?
15339-36-3?
Manganese, bis(dimethylcarbamodithioato-S,S')-
P196?
15339-36-3
?
Manganese dimethyldithiocarbamate
P197?
17702-57-7?
Formparanate
P197
?
17702-57-7?
Methanimidamide, N,N-dimethyl-N-(2-methyl-
4-(((methylamino)carbonyl)oxy)pheny1)-
P198
?
23422-53-9?
Formetanate hydrochloride
P198 23422-53-9 Methanimidamide, N,N-dimethyl-N'43-
(((methylamino)-carbonyl)oxylphenyl)-,
monohydrochloride
P199?
2032-65-7?
Methiocarb
P199?2032-65-7?
Phenol, (3,5-dimethyl-4-(methylthio)-,
methylcarbamate
P201?2631-37-0
?
Phenol, 3-methyl-5-(1-methylethyl)-, methyl
carbamate
P201
?2631-37-0?
Promecarb
P202?
64-00-6
?
m-Cumenyl methylcarbamate
P202?64-00-6?
3-Isopropylphenyl-N-methylcarbamate
P202
?
64-00-6?
Phenol, 3-11-methylethyl)-, methyl carbamate
P203?
1646-88-4?
Aldicarb sulfone
P203?
1646-88-4?
Propanal, 2-methyl-2-(methyl-sulfonyl)-, 0-
((methylamino)carbonyl) oxime
P204
?
57-47-6
?
Physostigmine
JCAR350721-0805030r01
P204
57-47-6
Pyrrolo(2,3-b)indol-5-ol, 1,2,3,3a,8,8a-
hex ahydro-1,3a,8-trimethyl-, methylcarbamate
(ester), (3aS-cis)-
P205
137-30-4
Zinc, bis(dimethylcarbamodithioato-S,S1)-
P205
137-30-4
Ziram
1986
1987
BOARD NOTE: An asterisk (*) following the CAS number indicates that the
1988
CAS number is given for the parent compound only.
1989
1990
1)
The commercial chemical products, manufacturing chemical intermediates, or off-
1991
specification commercial chemical products referred to in subsections (a) through
1992
(d) of this Section, are identified as toxic wastes (T) unless otherwise designated
1993
and are subject to the small quantity exclusion defined in Section 721.105(a) and
1994
(g). These wastes and their corresponding USEPA hazardous waste numbers are
1995
the following:
1996
1997
BOARD NOTE: For the convenience of the regulated community, the primary
1998
hazardous properties of these materials have been indicated by the letters T
1999
(Toxicity), R (Reactivity), I (Ignitability), and C (Corrosivity). The absence of a
2000
letter indicates that the compound is only listed for toxicity. Wastes are first
2001
listed in alphabetical order by substance and then listed again in numerical order
2002
by USEPA hazardous waste number.
2003
USEPA
Hazardous
Waste No.
U394
U001
UO34
U187
U005
U240
U112
U144
U214
See F027
U002
U003
U004
U005
U006
Chemical
Abstracts No.
(CAS No.)
30558-43-1
75-07-0
75-87-6
62-44-2
53-96-3
P 94-75-7
141-78-6
301-04-2
563-68-8
93-76-5
67-64-1
75-05-8
98-86-2
53-96-3
75-36-5
Substance
A2213
Acetaldehyde (I)
Acetaldehyde, trichloro-
Acetamide, N-(4-ethoxypheny1)-
Acetamide, N-9H-fluoren-2-yl-
Acetic acid, (2,4-dichlorophenoxy)-, salts and
esters
Acetic acid, ethyl ester (I)
Acetic acid, lead (2+) salt
Acetic acid, thallium (1+) salt
Acetic acid, (2,4,5-trichlorophenoxy)-
Acetone (I)
Acetonitrile (I, T)
Acetophenone
2-Acetylaminofluorene
Acetyl chloride (C, R, T)
JCAR350721-0805030r01
U007
79-06-1
Acrylamide
U008
79-10-7
Acrylic acid (1)
U009
107-13-1
Acrylonitrile
U011
61-82-5
Amitrole
U012
62-53-3
Aniline (I, T)
U136
75-60-5
Arsinic acid, dimethyl-
U014
492-80-8
Auramine
U015
115-02-6
Azaserine
U010
50-07-7
Azirino(2',3':3,4)pyrrolo(1,2-a)indole-4,7-dione,
6-amino-8-(((aminocarbonyl)oxy)methyl)-
1,1a,2,8,8a,8b-hexahydro-8a-methoxy-5-
methyl-, (1a-S-(laa,813,8aa,8ba))-
U280
101-27-9
Barban
U278
22781-23-3
Bendiocarb
U364
22961-82-6
Bendiocarb phenol
U271
17804-35-2
Benomyl
U157
56-49-5
Benz(j)aceanthrylene, 1,2-dihydro-3-methyl-
U016
225-51-4
Benz(c)acridine
U017
98-87-3
Benzal chloride
U192
23950-58-5
Benzamide, 3,5-dichloro-N-(1,1-dimethy1-2-
propyny1)-
U018
56-55-3
Benz(a)anthracene
U094
57-97-6
Benz(a)anthracene, 7,12-dimethyl-
U012
62-53-3
Benzenamine (I,T)
U014
492-80-8
Benzenamine, 4,4'-carbonimidoylbis(N,N-
dimethyl-
U049
3165-93-3
Benzenamine, 4-chloro-2-methyl-,
hydrochloride
U093
60-11-7
Benzenamine, N,N-dimethy1-4-(phenylazo)-
U328
95-53-4
Benzenamine, 2-methyl-
U353
106-49-0
Benzenamine, 4-methyl-
U158
101-14-4
Benzenamine, 4,4'-methylenebis(2-chloro-
U222
636-21-5
Benzenamine, 2-methyl-, hydrochloride
U 181
99-55-8
Benzenamine, 2-methyl-5-nitro-
U019
71-43-2
Benzene (I, T)
UO38
510-15-6
Benzeneacetic acid, 4-chloro-a-(4-
chloropheny1)-a-hydroxy-, ethyl ester
UO30
101-55-3
Benzene, 1-bromo-4-phenoxy-
UO35
305-03-3
Benzenebutanoic acid, 4-(bis(2-
chloroethyDamino)-
UO37
108-90-7
Benzene, chloro-
U221
25376-45-8
Benzenediamine, ar-methyl-
JCAR350721-0805030r01
UO28
117-81-7
1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl)
ester
U069
84-74-2 1,2-Benzenedicarboxylic acid, dibutyl ester
U088
84-66-2
1,2-Benzenedicarboxylic acid, diethyl ester
U102
131-11-3
1,2-Benzenedicarboxylic acid, dimethyl ester
15107
117-84-0
1,2-Benzenedicarboxylic acid, dioctyl ester
U070
95-50-1
Benzene, 1,2-dichloro-
U071
541-73-1
Benzene, 1,3-dichloro-
U072
106-46-7
Benzene, 1,4-dichloro-
U060
72-54-8
Benzene, 1,I'-(2,2-dichloroethylidene)bis(4-
chloro-
U017
98-87-3
Benzene, (dichloromethyl)-
U223
26471-62-5
Benzene, 1,3-diisocyanatomethyl- (R, T)
U239
1330-20-7
Benzene, dimethyl- (I, T)
U201
108-46-3
1,3-Benzenediol
U127
118-74-1
Benzene, hexachloro-
U056
110-82-7
Benzene, hexahydro- (I)
U220
108-88-3
Benzene, methyl-
U105
121-14-2
Benzene, 1-methy1-2,4-dinitro-
U106
606-20-2
Benzene, 2-methy1-1,3-dinitro-
U055
98-82-8
Benzene, (1-methylethyl)- (I)
U169
98-95-3
Benzene, nitro-
U183
608-93-5
Benzene, pentachloro-
U185
82-68-8
Benzene, pentachloronitro-
UO20
98-09-9
Benzenesulfonic acid chloride (C, R)
UO20
98-09-9
Benzenesulfonyl chloride (C, R)
U207
95-94-3
Benzene, 1,2,4,5-tetrachloro-
U061
50-29-3
Benzene, 1,1'-(2,2,2-trichloroethylidene)bis(4-
chloro-
U247
72-43-5
Benzene, 1,1'-(2,2,2-trichloroethylidene)bis(4-
methoxy-
UO23
98-07-7
Benzene, (trichloromethyl)-
U234
99-35-4
Benzene, 1,3,5-trinitro-
UO21
92-87-5
Benzidene
U202
P 81-07-2
1,2-Benzisothiazol-3(2H)-one, 1,1-dioxide, and
salts
U203
94-59-7
1,3-Benzodioxole, 5-(2-propeny1)-
U141
120-58-1
1,3-Benzodioxole, 5-(1-propeny1)-
U090
94-58-6
1,3-Benzodioxole, 5-propyl-
U278
22781-23-3
1,3-Benzodioxo1-4-ol, 2,2-dimethyl-, methyl
carbamate
U364
22961-82-6
1,3-Benzodioxo1-4-ol, 2,2-dimethyl-
U367
1563-38-8
7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-
JCAR350721-0805030r01
U064
189-55-9
Benzo(rst)pentaphene
U248
P 81-81-2
2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-
phenylbuty1)-, and salts, when present at
concentrations of 0.3 percent or less
UO22
50-32-8
Benzo(a)pyrene
U197
106-51-4
p-Benzoquinone
UO23
98-07-7
Benzotrichloride (C, R, T)
U085
1464-53-5
2,2'-Bioxirane
UO21
92-87-5
(1,1'-Biphenyl)-4,4'-diamine
U073
91-94-1
(1,1'-Biphenyl)-4,4'-diamine, 3,3'-dichloro-
U091
119-90-4
(1,11-Biphenyl)-4,41-diamine, 3,3'-dimethoxy-
U095
119-93-7
(1,11-Biphenyl)-4,4'-diamine, 3,3'-dimethyl-
U225
75-25-2
Bromoform
UO30
101-55-3
4-Bromophenyl phenyl ether
U128
87-68-3
1,3-Butadiene, 1,1,2,3,4,4-hexachloro-
U172
924-16-3
1-Butanamine, N-butyl-N-nitroso-
UO31
71-36-3
1-Butanol (I)
U159
78-93-3
2-Butanone (I, T)
U160
1338-23-4
2-Butanone, peroxide (R, T)
U053
4170-30-3
2-Butenal
U074
764-41-0
2-Butene, 1,4-dichloro- (I, T)
U143
303-34-4
2-Butenoic acid, 2-methyl-, 7-((2,3-dihydroxy-
2-(1-methoxyethyl)-3-methyl-1-
oxobutoxy)methyl)-2,3,5,7a-tetrahydro-1H-
pyrrolizin-1-y1 ester, (1S-(1a(Z), 7(2S*,3R*),
7aa))-
UO31
71-36-3
n-Butyl alcohol (I)
U136
75-60-5
Cacodylic acid
UO32
13765-19-0
Calcium chromate
U372
10605-21-7
Carbamic acid, 1H-benzimidazol-2-yl, methyl
ester
U271
17804-35-2
Carbamic acid, (1-((butylamino)carbony1)-1H-
benzimidazol-2-y1)-, methyl ester
U280
101-27-9
Carbamic acid, (3-chlorophenyl)-, 4-chloro-2-
butynyl ester
U238
51-79-6
Carbamic acid, ethyl ester
U178
615-53-2
Carbamic acid, methylnitroso-, ethyl ester
U373
122-42-9
Carbamic acid, phenyl-, 1-methylethyl ester
U409
23564-05-8
Carbamic acid, (1,2-
phenylenebis(iminocarbonothioy1))bis-,
dimethyl ester
U097
79-44-7
Carbamic chloride, dimethyl-
JCAR350721-0805030r01
U114
P 111-54-6
Carbamodithioic acid, 1,2-ethanediyIbis-, salts
and esters
U062
2303-16-4
Carbamothioic acid, bis(1-methylethyl)-, S-(2,3-
dichloro-2-propenyl) ester
U389
2303-17-5
Carbamothioic acid, bis(1-methylethyl)-, S-
(2,3,3-trichloro-2-propenyl) ester
U387
52888-80-9
Carbamothioic acid, dipropyl-, S-
(phenylmethyl) ester
U279
63-25-2
Carbaryl
U372
10605-21-7
Carbendazim
U367
1563-38-8
Carbofuran phenol
U215
6533-73-9
Carbonic acid, dithallium (1+) salt
UO33
353-50-4
Carbonic difluoride
U156
79-22-1 Carbonochloridic acid, methyl ester (I, T)
UO33
353-50-4
Carbon oxyfluoride (R, T)
U211
56-23-5 Carbon tetrachloride
UO34
75-87-6
Chloral
UO35
305-03-3
Chlorambucil
UO36
57-74-9
Chlordane,
a
and
y
isomers
UO26
494-03-1
Chlomaphazin
UO37
108-90-7
Chlorobenzene
UO38
510-15-6
Chlorobenzilate
UO39
59-50-7
p-Chloro-m-cresol
U042
110-75-8
2-Chloroethyl vinyl ether
U044
67-66-3
Chloroform
U046
107-30-2
Chloromethyl methyl ether
U047
91-58-7
p-Chloronaphthalene
U048
95-57-8
o-Chlorophenol
U049
3165-93-3
4-Chloro-o-toluidine, hydrochloride
UO32
13765-19-0
Chromic acid H2CrO4, calcium salt
U050
218-01-9
Chrysene
U051
Creosote
U052
1319-77-3
Cresol (Cresylic acid)
U053
4170-30-3
Crotonaldehyde
U055
98-82-8
Cumeme
(I)
U246
506-68-3
Cyanogen bromide CNBr
U197
106-51-4
2,5-Cyclohexadiene-1,4-dione
U056
110-82-7
Cyclohexane (I)
U129
58-89-9
Cyclohexane, 1,2,3,4,5,6-hexachloro-,
(1a,2a,311,4a,5a,6(3)-
U057
108-94-1
Cyclohexanone
(I)
U130
77-47-4
1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-
U058
50-18-0
Cyclophosphamide
JCAR350721-0805030r01
U240
P 94-75-7
2,4-D, salts and esters
U059
20830-81-3
Daunomycin
U060
72-54-8
DDD
U061
50-29-3
DDT
U062
2303-16-4
Diallate
U063
53-70-3
Dibenz(a,h)anthracene
U064
189-55-9
Dibenzo(a,i)pyrene
U066
96-12-8
1,2-Dibromo-3-chloropropane
U069
84-74-2
Dibutyl phthalate
U070
95-50-1
o-Dichlorobenzene
U071
541-73-1
m-Dichlorobenzene
U072
106-46-7
p-Dichlorobenzene
U073
91-94-1
3,3'-Dichlorobenzidine
U074
764-41-0
1,4-Dichloro-2-butene (I, T)
U075
75-71-8
Dichlorodifluoromethane
U078
75-35-4
1,1-Dichloroethylene
U079
156-60-5
1,2-Dichloroethylene
UO25
111-44-4
Dichloroethyl ether
UO27
108-60-1
Dichloroisopropyl ether
UO24
111-91-1
Dichloromethoxy ethane
U081
120-83-2
2,4-Dichlorophenol
U082
87-65-0
2,6-Dichlorophenol
U084
542-75-6
1,3-Dichloropropene
U085
1464-53-5
1,2:3,4-Diepoxybutane (I, T)
U395
5952-26-1
Diethylene glycol, dicarbamate
U108
123-91-1
1,4-Diethyleneoxide
UO28
117-81-7
Diethylhexyl phthalate
U086
1615-80-1
N,N'-Diethylhydrazine
U087
3288-58-2
0,0-Diethyl S-methyl dithiophosphate
U088
84-66-2
Diethyl phthalate
U089
56-53-1
Diethylstilbestrol
U090
94-58-6
Dihydrosafrole
U091
119-90-4
3,3'-Dimethoxybenzidine
U092
124-40-3
Dimethylamine (I)
U093
60-11-7
p-Dimethylaminoazobenzene
U094
57-97-6
7,12-Dimethylbenz(a)anthracene
U095
119-93-7
3,3'-Dimethylbenzidine
U096
80-15-9
a,
a-Dimethylbenzylhydroperoxide (R)
U097
79-44-7
Dimethylcarbamoyl chloride
U098
57-14-7
1,1-Dimethylhydrazine
U099
540-73-8
1,2-Dimethylhydrazine
U101
105-67-9
2,4-Dimethylphenol
U102
131-11-3
Dimethyl phthalate
JCAR350721-0805030r01
U103
77-78-1
Dimethyl sulfate
U105
121-14-2
2,4-Dinitrotoluene
U106
606-20-2
2,6-Dinitrotoluene
U107
117-84-0
Di-n-octyl phthalate
U108
123-91-1
1,4-Dioxane
U109
122-66-7
1,2-Diphenylhydrazine
U110
142-84-7
Dipropylamine (I)
U111
621-64-7
Di-n-propylnitrosamine
U041
106-89-8
Epichlorohydrin
U001
75-07-0
Ethanal (I)
U404
121-44-8
Ethanamine, N,N-diethyl-
U174
55-18-5
Ethanamine, N-ethyl-N-nitroso-
U155
91-80-5
1,2-Ethanediamine, N,N-dimethyl-N'-2-
pyridinyl-N'-(2-thienylmethyl)-
U067
106-93-4
Ethane, 1,2-dibromo-
U076
75-34-3
Ethane, 1,1-dichloro-
U077
107-06-2
Ethane, 1,2-dichloro-
U131
67-72-1 Ethane, hexachloro-
UO24
111-91-1
Ethane, 1,1'-(methylenebis(oxy))bis(2-chloro-
U117
60-29-7
Ethane, 1,1'-oxybis- (I)
UO25
111-44-4
Ethane, 1,1'-oxybis(2-chloro-
U184
76-01-7
Ethane, pentachloro-
U208
630-20-6
Ethane, 1,1,1,2-tetrachloro-
U209
79-34-5
Ethane, 1,1,2,2-tetrachloro-
U218
62-55-5
Ethanethioamide
U226
71-55-6
Ethane, 1,1,1-trichloro-
U227
79-00-5
Ethane, 1,1,2-trichloro-
U410
59669-26-0
Ethanimidothioic acid, N,N'-
(thiobis((methylimino)carbonyloxy))bis-,
dimethyl ester
U394
30558-43-1
Ethanimidothioic acid, 2-(dimethylamino)-N-
hydroxy-2-oxo-, methyl ester
U359
110-80-5
Ethanol, 2-ethoxy-
U173
1116-54-7
Ethanol, 2,2'-(nitrosoimino)bis-
U395
5952-26-1
Ethanol, 2,2'-oxybis-, dicarbamate
U004
98-86-2
Ethanone, 1-phenyl-
U043
75-01-4
Ethene, chloro-
U042
110-75-8
Ethene, (2-chloroethoxy)-
U078
75-35-4
Ethene, 1,1-dichloro-
U079
156-60-5
Ethene, 1,2-dichloro-, (E)-
U210
127-18-4
Ethene, tetrachloro-
U228
79-01-6
Ethene, trichloro-
U112
141-78-6
Ethyl acetate (I)
JCAR350721-0805030r01
U113
140-88-5
Ethyl acrylate (I)
U238
51-79-6
Ethyl carbamate (urethane)
U117
60-29-7
Ethyl ether
U114
P 111-54-6
Ethylenebisdithiocarbamic acid, salts and esters
U067
106-93-4
Ethylene dibromide
U077
107-06-2
Ethylene dichloride
U359
110-80-5
Ethylene glycol monoethyl ether
U115
75-21-8
Ethylene oxide (I, T)
U116
96-45-7
Ethylenethiourea
U076
75-34-3
Ethylidene dichloride
U118
97-63-2
Ethyl methacrylate
U119
62-50-0
Ethyl methanesulfonate
U120
206-44-0
Fluoranthene
U122
50-00-0
Formaldehyde
U123
64-18-6
Formic acid (C, T)
U124
110-00-9
Furan (I)
U125
98-01-1
2-Furancarboxaldehyde (I)
U147
108-31-6
2,5-Furandione
U213
109-99-9
Furan, tetrahydro- (I)
U125
98-01-1
Furfural (I)
U124
110-00-9
Furfuran (I)
U206
18883-66-4
Glucopyranose, 2-deoxy-2-(3-methy1-3-
nitrosoureido)-, D-
U206
18883-66-4
D-Glucose, 2-deoxy-2-(((methylnitrosoamino)-
carbonyl)amino)-
U126
765-34-4
Glycidylaldehyde
U163
70-25-7
Guanidine, N-methyl-N'-nitro-N-nitroso-
U127
118-74-1
Hexachlorobenzene
U128
87-68-3
Hexachlorobutadiene
U130
77-47-4
Hexachlorocyclopentadiene
U131
67-72-1
Hexachloroethane
U132
70-30-4
Hexachlorophene
U243
1888-71-7
Hexachloropropene
U133
302-01-2
Hydrazine (R, T)
U086
1615-80-1
Hydrazine, 1,2-diethyl-
U098
57-14-7
Hydrazine, 1,1-dimethyl-
U099
540-73-8
Hydrazine, 1,2-dimethyl-
U109
122-66-7
Hydrazine, 1,2-diphenyl-
U134
7664-39-3
Hydrofluoric acid (C, T)
U134
7664-39-3
Hydrogen fluoride (C, T)
U135
7783-06-4
Hydrogen sulfide
U135
7783-06-4
Hydrogen sulfide H2S
U096
80-15-9
Hydroperoxide, 1-methyl-l-phenylethyl- (R)
JCAR350721-0805030r01
U116
96-45-7
2-Imidazolidinethione
U137
193-39-5
Indeno(1,2,3-cd)pyrene
U190
85-44-9 1,3-Isobenzofurandione
U140
78-83-1
Isobutyl alcohol (I, T)
U141
120-58-1
Isosafrole
U142
143-50-0
Kepone
U143
303-34-4
Lasiocarpene
U144
301-04-2
Lead acetate
U 146
1335-32-6
Lead, bis(acetato-0)tetrahydroxytri-
U145
7446-27-7
Lead phosphate
U146
1335-32-6
Lead subacetate
U129
58-89-9
Lindane
U163
70-25-7
MNNG
U147
108-31-6
Maleic anhydride
U148
123-33-1
Maleic hydrazide
U149
109-77-3
Malononitrile
U150
148-82-3
Melphalan
U151
7439-97-6
Mercury
U152
126-98-7
Methacrylonitrile (I, T)
U092
124-40-3
Methanamine, N-methyl- (I)
UO29
74-83-9
Methane, bromo-
U045
74-87-3
Methane, chloro- (I, T)
U046
107-30-2
Methane, chloromethoxy-
U068
74-95-3
Methane, dibromo-
U080
75-09-2
Methane, dichloro-
U075
75-71-8
Methane, dichlorodifluoro-
U138
74-88-4
Methane, iodo-
U119
62-50-0
Methanesulfonic acid, ethyl ester
U211
56-23-5
Methane, tetrachloro-
U153
74-93-1
Methanethiol (I, T)
U225
75-25-2
Methane, tribromo-
U044
67-66-3
Methane, trichloro-
U121
75-69-4
Methane, trichlorofluoro-
UO36
57-74-9
4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8-
octachloro-2,3,3a,4,7,7a-hexahydro-
U154
67-56-1
Methanol (I)
U155
91-80-5
Methapyrilene
U142
143-50-0
1,3,4-Metheno-2H-cyclobuta(cd)pentalen-2-one,
1,1 a,3,3a,4,5,5,5a,5b,6-decachlorooctahydro-
U247
72-43-5
Methoxychlor
U154
67-56-1
Methyl alcohol (I)
UO29
74-83-9
Methyl bromide
U186
504-60-9
1-Methylbutadiene (I)
JCAR350721-0805030r01
U045
74-87-3
Methyl chloride (I, T)
U156
79-22-1 Methyl chlorocarbonate (I, T)
U226
71-55-6
Methylchloroform
U157
56-49-5
3-Methylcholanthrene
U158
101-14-4
4,41-Methylenebis(2-chloroaniline)
U068
74-95-3
Methylene bromide
U080
75-09-2
Methylene chloride
U159
78-93-3
Methyl ethyl ketone (MEK) (I, T)
U160
1338-23-4
Methyl ethyl ketone peroxide (R, T)
U138
74-88-4
Methyl iodide
U161
108-10-1
Methyl isobutyl ketone (I)
U162
80-62-6
Methyl methacrylate (I, T)
U161
108-10-1
4-Methyl-2-pentanone (I)
U164
56-04-2
Methylthiouracil
U010
50-07-7
Mitomycin C
U059
20830-81-3
5,12-Naphthacenedione, 8-acety1-10-43-amino-
2,3,6-trideoxy)-et-L-1pco-hexapyranosylloxyl)-
7,8,9,10-tetrahydro-6,8,11-trihydroxy- 1 -
methoxy-, (8S-cis)-
U167
134-32-7
1-Naphthalenamine
U168
91-59-8
2-Naphthalenamine
UO26
494-03-1
Naphthaleneamine, N,N1-bis(2-chloroethyl)-
U165
91-20-3
Naphthalene
U047
91-58-7
Naphthalene, 2-chloro-
U166
130-15-4
1,4-Naphthalenedione
U236
72-57-1
2,7-Naphthalenedisulfonic acid, 3,3'-((3,3'-
dimethyl-(1,11-bipheny1)-4,4'-diyObis(azo)bis(5-
amino-4-hydroxy)-, tetrasodium salt
U279
63-25-2
1-Naphthalenol, methylcarbamate
U166
130-15-4
1,4-Naphthoquinone
U167
134-32-7
a-Naphthylamine
U168
91-59-8
p-Naphthylamine
U217
10102-45-1
Nitric acid, thallium (1+) salt
U169
98-95-3
Nitrobenzene (I, T)
U170
100-02-7
p-Nitrophenol
U171
79-46-9
2-Nitropropane
(I,
T)
U172
924-16-3
N-Nitrosodi-n-butylamine
U173
1116-54-7
N-Nitrosodiethanolamine
U174
55-18-5
N-Nitrosodiethylamine
U176
759-73-9
N-Nitroso-N-ethylurea
U177
684-93-5
N-Nitroso-N-methylurea
U178
615-53-2
N-Nitroso-N-methylurethane
U179
100-75-4
N-Nitrosopiperidine
JCAR350721-0805030r01
U180
930-55-2
N-Nitrosopyrrolidine
U181
99-55-8
5-Nitro-o-toluidine
U193
1120-71-4
1,2-Oxathiolane, 2,2-dioxide
U058
50-18-0
2H-1,3,2-Oxazaphosphorin-2-amine, N,N-bis(2-
chloroethyl)tetrahydro-, 2-oxide
U115
75-21-8
Oxirane (I, T)
U126
765-34-4
Oxiranecarboxyaldehyde
U041
106-89-8
Oxirane, (chloromethyl)-
U182
123-63-7
Paraldehyde
U183
608-93-5
Pentachlorobenzene
U184
76-01-7
Pentachloroethane
U185
82-68-8
Pentachloronitrobenzene (PCNB)
See F027
87-86-5
Pentachlorophenol
U161
108-10-1
Pentanol, 4-methyl-
U186
504-60-9
1,3-Pentadiene (I)
U187
62-44-2
Phenacetin
U188
108-95-2
Phenol
U048
95-57-8
Phenol, 2-chloro-
UO39
59-50-7
Phenol, 4-chloro-3-methyl-
U081
120-83-2
Phenol, 2,4-dichloro-
U082
87-65-0
Phenol, 2,6-dichloro-
U089
56-53-1
Phenol, 4,4'-(1,2-diethyl-1,2-ethenedi yl)bis-,
(E)-
U101
105-67-9
Phenol, 2,4-dimethyl-
U052
1319-77-3
Phenol, methyl-
U132
70-30-4
Phenol, 2,2'-methylenebis(3,4,6-trichloro-
U411
114-26-1
Phenol, 2-(1-methylethoxy)-, methylcarbamate
U170
100-02-7
Phenol, 4-nitro-
See F027
87-86-5
Phenol, pentachloro-
See F027
58-90-2
Phenol, 2,3,4,6-tetrachloro-
See F027
95-95-4
Phenol, 2,4,5-trichloro-
See F027
88-06-2
Phenol, 2,4,6-trichloro-
U150
148-82-3
L-Phenylalanine, 4-(bis(2-chloroethyl)amino)-
U145
7446-27-7
Phosphoric acid, lead (2+) salt (2:3)
U087
3288-58-2
Phosphorodithioic acid, 0,0-diethyl S-methyl
ester
U189
1314-80-3
Phosphorus sulfide (R)
U190
85-44-9
Phthalic anhydride
U191
109-06-8
2-Picoline
U179
100-75-4
Piperidine, 1-nitroso-
U192
23950-58-5
Pronamide
U194
107-10-8
1-Propanamine (I, T)
U111
621-64-7
1-Propanamine, N-nitroso-N-propyl-
JCAR350721-0805030r01
U110
142-84-7
1-Propanamine, N-propyl- (I)
U066
96-12-8
Propane, 1,2-dibromo-3-chloro-
U083
78-87-5
Propane, 1,2-dichloro-
U149
109-77-3
Propanedinitrile
U171
79-46-9
Propane, 2-nitro- (I, T)
UO27
108-60-1
Propane, 2,2'-oxybis(2-chloro-
See F027
93-72-1
Propanoic acid, 2-(2,4,5-trichlorophenoxy)-
U193
1120-71-4
1,3-Propane sultone
U235
126-72-7
1-Propanol, 2,3-dibromo-, phosphate (3:1)
U140
78-83-1 1-Propanol, 2-methyl- (I, T)
U002
67-64-1
2-Propanone (I)
U007
79-06-1
2-Propenamide
U084
542-75-6
1-Propene, 1,3-dichloro-
U243
1888-71-7
1-Propene, 1,1,2,3,3,3-hexachloro-
U009
107-13-1
2-Propenenitrile
U152
126-98-7
2-Propenenitrile, 2-methyl- (I, T)
U008
79-10-7
2-Propenoic acid (I)
U113
140-88-5
2-Propenoic acid, ethyl ester (I)
U118
97-63-2
2-Propenoic acid, 2-methyl-, ethyl ester
U162
80-62-6
2-Propenoic acid, 2-methyl-, methyl ester (I, T)
U373
122-42-9
Propham
U411
114-26-1
Propoxur
See F027
93-72-1 Propionic acid, 2-(2,4,5-trichlorophenoxy)-
U194
107-10-8
n-Propylamine (I, T)
U083
78-87-5
Propylene dichloride
U387
52888-80-9
Prosulfocarb
U148
123-33-1
3,6-Pyridazinedione, 1,2-dihydro-
U196
110-86-1
Pyridine
U191
109-06-8
Pyridine, 2-methyl-
U237
66-75-1
2,4-(1H,3H)-Pyrimidinedione, 5-(bis(2-
chloroethyl) amino)-
U164
58-04-2
4(1H)-Pyrimidinone, 2,3-dihydro-6-methy1-2-
thioxo-
U180
930-55-2
Pyrrolidine, 1-nitroso-
U200
50-55-5
Reserpine
U201
108-46-3
Resorcinol
U202
P 81-07-2
Saccharin and salts
U203
94-59-7
Safrole
U204
7783-00-8
Selenious acid
U204
7783-00-8
Selenium dioxide
U205
7488-56-4
Selenium sulfide
U205
7488-56-4
Selenium sulfide SeS 2 (R, T)
U015
115-02-6
L-Serine, diazoacetate (ester)
JCAR350721-0805030r01
See F027
93-72-1
Silvex (2,4,5-TP)
U206
18883-66-4
Streptozotocin
U103
77-78-1
Sulfuric acid, dimethyl ester
U189
1314-80-3
Sulfur phosphide (R)
See F027
93-76-5
2,4,5-T
U207
95-94-3
1,2,4,5-Tetrachlorobenzene
U208
630-20-6
1,1,1,2-Tetrachloroethane
U209
79-34-5
1,1,2,2-Tetrachloroethane
U210
127-18-4
Tetrachloroethylene
See F027
58-90-2
2,3,4,6-Tetrachlorophenol
U213
109-99-9
Tetrahydrofuran (I)
U214
563-68-8
Thallium (I) acetate
U215
6533-73-9
Thallium (I) carbonate
U216
7791-12-0
Thallium (I) chloride
U216
7791-12-0
Thallium chloride T1C1
U217
10102-45-1
Thallium (I) nitrate
U218
62-55-5
Thioacetamide
U410
59669-26-0
Thiodicarb
U153
74-93-1
Thiomethanol (I, T)
U244
137-26-8
Thioperoxydicarbonic diamide ((H2N)C(S))2S2,
tetramethyl-
U409
23564-05-8
Thiophanate-methyl
U219
62-56-6
Thiourea
U244
137-26-8
Thiram
U220
108-88-3
Toluene
U221
25376-45-8
Toluenediamine
U223
26471-62-5
Toluene diisocyanate (R, T)
U328
95-53-4
o-Toluidine
U353
106-49-0
p-Toluidine
U222
636-21-5
o-Toluidine hydrochloride
U389
2303-17-5
Triallate
U011
61-82-5 1H-1,2,4-Triazol-3-amine
U227
79-00-5
Ethane, 1,1,2-trichloro-
U227
79-00-5
1,1,2-Trichloroethane
U228
79-01-6
Trichloroethylene
U121
75-69-4
Trichloromonofluoromethane
See F027
95-95-4
2,4,5-Trichlorophenol
See F027
88-06-2
2,4,6-Trichlorophenol
U404
121-44-8
Triethylamine
U234
99-35-4
1,3,5-Trinitrobenzene (R, T)
U182
123-63-7
1,3,5-Trioxane, 2,4,6-trimethyl-
U235
126-72-7
Tris (2,3-dibromopropyl) phosphate
U236
72-57-1
Trypan blue
JCAR350721-0805030r01
U237
66-75-1
Uracil mustard
U176
759-73-9
Urea, N-ethyl-N-nitroso-
U177
684-93-5
Urea, N-methyl-N-nitroso-
U043
75-01-4
Vinyl chloride
U248
P 81-81-2
Warfarin, and salts, when present at
concentrations of 0.3 percent or less
U239
1330-20-7
Xylene (I)
U200
50-55-5
Yohimban-16-carboxylic acid, 11,17-
dimethoxy-18-((3,4,5-trimethoxybenzoyl)oxy)-,
methyl ester, (313,1613,17“,18[3,200-
U249
1314-84-7
Zinc phosphide Zn3 P2 , when present at
concentrations of 10 percent or less
2004
2005
Numerical Listing
2006
USEPA?
Chemical
Hazardous
?
Abstracts No.
Waste No.?
(CAS No.)?
Substance
2007
U001?
75-07-0
?
Acetaldehyde (I)
U001
?
75-07-0
?
Ethanal (I)
U002?
67-64-1?Acetone (I)
U002?67-64-1
?
2-Propanone (I)
U003?
75-05-8?
Acetonitrile (1, T)
U004?98-86-2
?Acetophenone
U004?
98-86-2
?
Ethanone, 1-phenyl-
U005?
53-96-3
?
Acetamide, N-9H-fluoren-2-yl-
U005?53-96-3?
2-Acetylaminofluorene
U006?
75-36-5
?
Acetyl chloride (C, R, T)
U007
?
79-06-1
?
Acrylamide
U007
?79-06-1?
2-Propenamide
U008?
79-10-7
?
Acrylic acid (I)
U008?
79-10-7
?
2-Propenoic acid (I)
U009
?107-13-1?
Acrylonitrile
U009
?
107-13-1
?
2-Propenenitrile
U010?
50-07-7
?
Azirino(21,31:3,4)pyrrolo(1,2-a)indole-4,7-dione, 6-
amino-8-(((aminocarbonyl)oxy)methyl)-
1,1a,2,8,8a,8b-hexahydro-8a-methoxy-5-meth yl-,
(1a-S-(lact,813,8aa,8bc())-
U010
?50-07-7?
Mitomycin C
U011?
61-82-5?Amitrole
U011?
61-82-5
?
1H-1,2,4-Triazol-3-amine
U012?
62-53-3?
Aniline (I, T)
JCAR350721-0805030r01
U012
62-53-3 Benzenamine (I, T)
U014
492-80-8
Auramine
U014
492-80-8
Benzenamine, 4,4'-carbonim doylbis(N,N-
dimethyl-
U015
115-02-6
Azaserine
U015
115-02-6
L-Serine, diazoacetate (ester)
U016
225-51-4
Benz(c)acridine
U017
98-87-3 Benzal chloride
U017
98-87-3 Benzene, (dichloromethyl)-
U018
56-55-3
Benz(a)anthracene
U019
71-43-2
Benzene (I, T)
UO20
98-09-9
Benzenesulfonic acid chloride (C R)
UO20
98-09-9
Benzenesulfonyl chloride (C, R)
UO21
92-87-5
Benzidene
UO21
92-87-5
(1,11-Biphenyl)-4,4'-diamine
UO22
50-32-8
Benzo(a)pyrene
UO23
98-07-7
Benzene, (trichloromethyl)-
UO23
98-07-7
Benzotrichloride (C, R, T)
UO24
111-91-1
Dichloromethoxy ethane
UO24
111-91-1
Ethane, 1 1' meth enebis
bis 2-chloro-
UO25
111-44-4
Dichloroethyl ether
UO25
111-44-4
Ethane 1,1'-oxybis(2-chloro-
UO26
494-03-1
Chlornaphazin
UO26
494-03-1
Naphthaleneamine, N,N'-bis(2-chloroethyl)-
UO27
108-60-1
Dichloroisopropyl ether
UO27
108-60-1
Propane, 2,2'-oxybis(2-chloro-
UO28
117-81-7
1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl)
ester
UO28
117-81-7
Diethylhexyl phthalate
UO29
74-83-9
Methane, bromo-
UO29
74-83-9
Methyl bromide
UO30
101-55-3
Benzene, 1-bromo-4-phenoxy-
UO30
101-55-3
4-Bromophenyl phenyl ether
UO31
71-36-3 1-Butanol (I)
UO31
71-36-3
n-Butyl alcohol (I)
UO32
13765-19-0
Calcium chromate
UO32
13765-19-0
Chromic acid H
CrO4
,
calcium salt
UO33
353-50-4
Carbonic difluoride
UO33
353-50-4
Carbon oxyfluoride (R, T)
UO34
75-87-6
Acetaldehyde, trichloro-
UO34
75-87-6
Chloral
UO35
305
-
03
-
3
Benzenebutanoic acid, 4-(bis(2-
chloroethyl)amino)-
JCAR350721-0805030r01
UO35
?
305-03-3
?
Chlorambucil
UO36
?
57-74-9?
Chlordane, cc and y isomers
UO36
?
57-74-9?
4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8-
octachloro-2,3,3a,4,7,7a-hexahydro-
UO37?
108-90-7
?
Benzene, chloro-
UO37
?
108-90-7?
Chlorobenzene
UO38?
510-15-6
?
Benzeneacetic acid 4-chloro-a-(4-chloropheny1)-
cc-hydroxy- ethyl ester
UO38
?
510-15-6
?
Chlorobenzilate
UO39
?
59-50-7?
p-Chloro-m-cresol
UO39
?
59-50-7
?
Phenol 4-chloro-3-methyl-
U041
?
106-89-8?
Epichlorohydrin
U041
?
106-89-8
?
Oxirane, (chloromethyl)-
U042
?
110-75-8
?
2-Chloroethyl vinyl ether
U042
?
110-75-8
?
Ethene (2-chloroethoxy)-
U043
?
75-01-4
?
Ethene, chloro-
U043
?
75-01-4?
Vinyl chloride
U044
?
67-66-3
?
Chloroform
U044
?
67-66-3
?
Methane, trichloro-
U045
?
74-87-3?Methane, chloro- (I, T)
U045
?
74-87-3
?
Methyl chloride (I, T)
U046
?
107-30-2?
Chloromethyl methyl ether
U046
?
107-30-2?
Methane, chloromethoxy-
U047
?
91-58-7
?
j3-Chloronaphthalene
U047
?
91-58-7?
Naphthalene, 2-chloro-
U048
?
95-57-8?
o-Chlorophenol
U048?
95-57-8
?
Phenol, 2-chloro-
U049
?
3165-93-3?
Benzenamine, 4-chloro-2-methyl-, hydrochloride
U049?
3165-93-3?
4-Chloro-o-toluidine, hydrochloride
U050
?
218-01-9?
Chrysene
U051
?
Creosote
U052
?
1319-77-3
?
Cresol (Cresylic acid)
U052
?
1319-77-3?
Phenol, methyl-
U053
?
4170-30-3?
2-Butenal
U053
?
4170-30-3?
Crotonaldehyde
U055
?
98-82-8
?
Benzene, (1-methylethyl)- (I)
U055?
98-82-8?
Cumeme (I)
U056
?
110-82-7?
Benzene, hexahydro- (I)
U056
?
110-82-7
?
Cyclohexane (I)
U057
?
108-94-1?
Cyclohexanone (I)
U058
?
50-18-0
?
Cyclophosphamide
U058
?
50-18-0
?
2H-1,3,2-Oxazaphosphorin-2-amine, N,N-bis(2-
chloroethyl)tetrahydro-, 2-oxide
JCAR350721-0805030r01
U059?
20830-81-3?
Daunomycin
U059
?
20830-81-3?
5 12-Naphthacenedione 8-acety1-10-((3-amino-
2,3,6-trideoxy)-a-L-lyxo-hexapyranosyl)oxyl)-
7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxY-,
(8S-cis)-
U060
?
72-54-8
?Benzene 1 1'-(2 2-dichloroethylidene)bis(4-
chloro-
U060?
72-54-8
?
DDD
U061?
50-29-3?Benzene, 1,11-(2,2,2-trichloroethylidene)bis(4-
chloro-
U061?
50-29-3?
DDT
U062?
2303-16-4?
Carbamothioic acid, bis(1-methylethyl)-, S-(2,3-
dichloro-2-propenyl) ester
U062?
2303-16-4?
Diallate
U063
?
53-70-3
?
Dibenz(a h)anthracene
U064?
189-55-9?
Benzo(rst)pentaphene
U064
?
189-55-9?
Dibenzo(a,i)pyrene
U066?
96-12-8?
1,2-Dibromo-3-chloropropane
U066?
96-12-8?Propane, 1,2-dibromo-3-chloro-
U067?
106-93-4
?
Ethane, 1,2-dibromo-
U067
?
106-93-4?
Ethylene dibromide
U068?
74-95-3?
Methane, dibromo-
U068
?
74-95-3?Methylene bromide
U069?
84-74-2
?1,2-Benzenedicarboxylic acid, dibutyl ester
U069?
84-74-2?
Dibutyl phthalate
U070?
95-50-1
?Benzene, 1,2-dichloro-
U070?
95-50-1
?
o-Dichlorobenzene
U071
?
541-73-1?
Benzene, 1,3-dichloro-
U071?
541-73-1?
m-Dichlorobenzene
U072?
106-46-7?
Benzene, 1,4-dichloro-
U072?
106-46-7
?
p-Dichlorobenzene
U073?
91-94-1
?
(1,1'-Biphenyl)-4,4'-diamine, 3,3'-dichloro-
U073?
91-94-1?3,3'-Dichlorobenzidine
U074
?
764-41-0
?
2-Butene, 1,4-dichloro- (I, T)
U074
?
764-41-0?
1,4-Dichloro-2-butene (1, T)
U075
?
75-71-8?
Dichlorodifluoromethane
U075?
75-71-8?Methane, dichlorodifluoro-
U076
?
75-34-3?Ethane, 1,1-dichloro-
U076
?
75-34-3?Ethylidene dichloride
U077?
107-06-2?
Ethane, 1,2-dichloro-
U077
?
107-06-2?
Ethylene dichloride
U078?
75-35-4
?
1,1-Dichloroethylene
U078
?
75-35-4
?
Ethene, 1,1-dichloro-
JCAR350721-0805030r01
U079?156-60-5?1,2-Dichloroethylene
U079
?
156-60-5
?
Ethene, 1,2-dichloro-, (E)-
U080?
75-09-2
?Methane, dichloro-
U080
?
75-09-2
?Methylene chloride
U081
?
120-83-2
?
2,4-Dichlorophenol
U081
?120-83-2?
Phenol 2 4-dichloro-
U082
?
87-65-0
?
2,6-Dichlorophenol
U082
?
87-65-0?
Phenol, 2,6-dichloro-
U083
?
78-87-5
?
Propane, 1,2-dichloro-
U083?78-87-5?
Propylene dichloride
U084
?
542-75-6
?
1,3-Dichloropropene
U084
?
542-75-6
?1-Propene, 1,3-dichloro-
U085?1464-53-5?
2,2'-Bioxirane
U085
?1464-53-5?
1,2:3,4-Diepoxybutane (I, T)
U086
?
1615-80-1?
N,N'-Diethylhydrazine
U086
?
1615-80-1
?
Hydrazine, 1,2-diethyl-
U087
?
3288-58-2?
0 0-Diethyl S-methyl dithiophosphate
U087
?
3288-58-2
?
Phosphorodithioic acid, 0,0-diethyl S-methyl ester
U088
?
84-66-2
?1,2-Benzenedicarboxylic acid, diethyl ester
U088
?84-66-2
?
Diethyl phthalate
U089
?
56-53-1
?
Diethylstilbestrol
U089
?
56-53-1
?Phenol, 4,4'-(1,2-diethyl-1,2-ethenediyl)bis-, (E)-
U090
?
94-58-6
?
1,3-Benzodioxole, 5-propyl-
U090?94-58-6?Dihydrosafrole
U091?119-90-4
?
(1,1'-Biphenyl)-4,4'-diamine, 3,3'-dimethoxy-
U091
?119-90-4
?
3,3'-Dimethoxybenzidine
U092
?124-40-3?
Dimethylamine (I)
U092
?
124-40-3
?
Methanamine, N-methyl- (I)
U093
?60-11-7?
Benzenamine, N,N-dimethy1-4-(phenylazo)-
U093
?
60-11-7
?
p-Dimethylaminoazobenzene
U094?
57-97-6
?Benz(a)anthracene, 7,12-dimethyl-
U094
?
57-97-6
?
7,12-Dimethylbenz(a)anthracene
U095?119-93-7
?
(1,11-Biphenyl)-4,4'-diamine, 3,3'-dimethyl-
U095
?
119-93-7
?
3,3'-Dimethylbenzidine
U096
?
80-15-9
?
a, a-Dimethylbenzylhydroperoxide (R)
U096
?
80-15-9
?
Hydroperoxide, 1-methyl-l-phenylethyl- (R)
U097?
79-44-7
?Carbamic chloride, dimethyl-
U097?
79-44-7
?Dimethylcarbamovl chloride
U098?
57-14-7
?1,1-Dimethylhydrazine
U098
?57-14-7?
Hydrazine, 1,1-dimethyl-
U099
?540-73-8?
1 2-Dimethylhydrazine
U099
?540-73-8?
Hydrazine, 1,2-dimethyl-
U101
?
105-67-9
?
2,4-Dimethylphenol
JCAR350721-0805030r01
U101?
105-67-9?
Phenol, 2,4-dimethyl-
U102?
131-11-3?
1,2-Benzenedicarboxylic acid, dimethyl ester
U102
?
131-11-3?
Dimethyl phthalate
U103?
77-78-1?Dimethyl sulfate
U103?
77-78-1
?
Sulfuric acid, dimethyl ester
U105
?
121-14-2?
Benzene, 1-methy1-2,4-dinitro-
U105?
121-14-2?
2,4-Dinitrotoluene
U106?
606-20-2?
Benzene, 2-methy1-1,3-dinitro-
U106?
606-20-2?
2,6-Dinitrotoluene
U107?
117-84-0
?
1,2-Benzenedicarboxylic acid, dioctyl ester
U107?
117-84-0
?
Di-n-octyl phthalate
U108
?
123-91-1?
1,4-Diethyleneoxide
U108?
123-91-1?
1,4-Dioxane
U109
?
122-66-7?
1 2-Diphenylhydrazine
U109?
122-66-7?
Hydrazine, 1,2-diphenyl-
U110?
142-84-7
?
Dipropylamine (I)
U110?
142-84-7?
1-Propanamine, N-propyl- (I)
U111
?
621-64-7
?
Di-n-propylnitrosamine
U111
?
621-64-7?
1-Propanamine, N-nitroso-N-propyl-
U112?
141-78-6?
Acetic acid, ethyl ester (I)
U112
?
141-78-6
?
Ethyl acetate (I)
U113
?
140-88-5
?
Ethyl acrylate (I)
U113?
140-88-5?
2-Propenoic acid, ethyl ester (I)
U114?
P 111-54-6?
Carbamodithioic acid, 1,2-ethanediylbis-, salts and
esters
U114
?
P 111-54-6
?
Ethylenebisdithiocarbamic acid, salts and esters
U115?
75-21-8?
Ethylene oxide (I, T)
U1 15
?
75-21-8
?
Oxirane (I, T)
U116?
96-45-7?Ethylenethiourea
U116
?
96-45-7?
2-Imidazolidinethione
U117?
60-29-7?
Ethane, 1 1 1 -oxybis- (1)
U117
?
60-29-7?
Ethyl ether
U118?
97-63-2?
Ethyl methacrylate
U118?
97-63-2?
2-Propenoic acid, 2-methyl-, ethyl ester
U119
?
62-50-0
?
Ethyl methanesulfonate
U119
?
62-50-0?
Methanesulfonic acid, ethyl ester
U120
?
206-44-0
?
Fluoranthene
U121?
75-69-4?
Methane, trichlorofluoro-
U121?
75-69-4?
Trichloromonofluoromethane
U122
?
50-00-0?
Formaldehyde
U123?
64-18-6
?
Formic acid (C, T)
U124
?
110-00-9
?
Furan (I)
U124
?
110-00-9
?
Furfuran (I)
JCAR350721-0805030r01
U125
98-01-1 2-Furancarboxaldehyde (I)
U125
98-01-1
Furfural (I)
U126
765-34-4
Glycidylaldehyde
U126
765-34-4
Oxiranecarbox aldeh de
U127
118-74-1
Benzene, hexachloro-
U127
118-74-1
Hexachlorobenzene
U128
87-68-3
I,3-Butadiene, 1,1,2,3,4,4-hexachloro-
U128
87-68-3 Hexachlorobutadiene
U129
58-89-9
Cyclohexane, 1,2,3,4,5,6-hexachloro-,
(1ec,2a,3(3,4a,5a,613)-
U129
58-89-9
Lindane
U 130
77-47-4 1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-
U130
77-47-4
Hexachlorocyclopentadiene
U131
67-72-1 Ethane, hexachloro-
U131
67-72-1
Hexachloroethane
U132
70-30-4
Hexachlorophene
U132
70-30-4
Phenol, 2,2'-methylenebis(3,4,6-trichloro-
U133
302-01-2
Hydrazine (R, T)
U134
7664-39-3
Hydrofluoric acid (C T)
U134
7664-39-3
Hydrogen fluoride (C, T)
U135
7783-06-4
Hydrogen sulfide
U135
7783-06-4
Hydrogen sulfide H2S
U136
75-60-5 Arsinic acid, dimethyl-
U136
75-60-5 Cacodylic acid
U137
193-39-5
Indeno(1,2,3-cd)pyrene
U138
74-88-4
Methane, iodo-
U138
74-88-4
Methyl iodide
U140
78-83-1 Isobutyl alcohol (I, T)
U140
78-83-1
1-Propanol, 2-methyl- (I, T)
U141
120-58-1
1,3-Benzodioxole, 5-(1-propeny1)-
U141
120-58-1
Isosafrole
U142
143-50-0
Kepone
U 142
143-50-0
1,
,3
1,a4,3
-Metheno
,3a,4,5,5-,5a
2H,5b
-cyclobuta
,6-decachlorooctahvd
(cd)pentalen-ro
2-one
-
,
1
U143 303-34-4 2-Butenoic acid, 2-methyl-, 74(2,3-dihydroxy-2-
(1-methoxyethyl)-3-methyl-1-oxobutoxy)methyl)-
2,3,5,7a-tetrahydro-1H-pyrrolizin-l-y1 ester, (1S-
(1a(Z), 7(2S*,3R*), 7aal)-
U143
303-34-4
Lasiocarpene
U144
301-04-2
Acetic acid, lead (2+) salt
U144
301-04-2
Lead acetate
U145
7446-27-7
Lead phosphate
U145
7446-27-7
Phosphoric acid, lead (2+) salt (2:3)
JCAR350721-0805030r01
U146
?1335-32-6
?
Lead, bis(acetato-O)tetrahydroxytri-
U146?1335-32-6?
Lead subacetate
U147
?
108-31-6
?
2,5-Furandione
U147?108-31-6?
Maleic anhydride
U148?
123-33-1
?
Maleic hydrazide
U148?
123-33-1?3,6-Pyridazinedione, 1,2-dihydro-
U149?
109-77-3
?
Malononitrile
U149
?
109-77-3?
Propanedinitrile
U150?
148-82-3
?
Melphalan
U150?
148-82-3
?
L-Phenylalanine 4-(bis(2-chloroethyl)amino)-
U151?7439-97-6
?
Mercury
U152?
126-98-7
?
Methacrylonitrile (I, T)
U152?126-98-7?
2-Propenenitrile 2-methyl- (I, T)
U153?
74-93-1
?
Methanethiol (I, T)
U153?
74-93-1?Thiomethanol (I T)
U154?67-56-1
?
Methanol (I)
U154?
67-56-1
?Methyl alcohol (I)
U155?91-80-5
?1 2-Ethanediamine, N N-dimethyl-N-2-pyridinyl-
l\P-(2-thienylmethyl)-
U155?
91-80-5?Methapyrilene
U156?
79-22-1
?
Carbonochloridic acid, methyl ester (I, T)
U156?79-22-1
?Methyl chlorocarbonate (I, T)
U157?
56-49-5?
Benz(j)aceanthrylene, 1,2-dihydro-3-methyl-
U157
?56-49-5?
3-Methylcholanthrene
U158?
101-14-4
?
Benzenamine, 4,4'-methylenebis(2-chloro-
U158?
101-14-4?
4,4'-Methylenebis(2-chloroaniline)
U159
?
78-93-3
?2-Butanone (I, T)
U159?
78-93-3?Methyl ethyl ketone (MEK) (1, T)
U160
?
1338-23-4?
2-Butanone, peroxide (R, T)
U160?
1338-23-4?
Methyl ethyl ketone peroxide (R, T)
U161
?108-10-1
?
Methyl isobutyl ketone (I)
U161?
108-10-1?
4-Methyl-2-pentanone (I)
U161?108-10-1?
Pentanol, 4-methyl-
U162?
80-62-6?
Methyl methacrylate (1, T)
U162?
80-62-6?
2-Propenoic acid, 2-methyl-, methyl ester (I, T)
U163?
70-25-7
?
Guanidine, N-methyl-N'-nitro-N-nitroso-
U163?
70-25-7?MNNG
U164
?
56-04-2
?
Methylthiouracil
U164
?58-04-2
?4(1H)-Pyrimidinone, 2,3-dihydro-6-methy1-2-
thioxo-
U165?
91-20-3
?Naphthalene
U166?
130-15-4
?
1,4-Naphthalenedione
U166?
130-15-4
?
1,4-Naphthoquinone
JCAR350721-0805030r01
U167?
134-32-7?
1-Naphthalenamine
U167
?
134-32-7?
a-Naphthylamine
U168?
91-59-8?
2-Naphthalenamine
U168?
91-59-8?
13-Naphthylamine
U169?
98-95-3?
Benzene, nitro-
U169
?
98-95-3
?
Nitrobenzene (I, T)
U170
?
100-02-7?
p-Nitrophenol
U170?
100-02-7?
Phenol, 4-nitro-
U171
?
79-46-9
?
2-Nitropropane (I, T)
U171?
79-46-9?
Propane, 2-nitro- (I, T)
U172?
924-16-3?
1-Butanamine N-butyl-N-nitroso-
U172?
924-16-3?
N-Nitrosodi-n-butylamine
U173?
1116-54-7
?
Ethanol, 2,24nitrosoimino)bis-
U173?
1116-54-7?
N-Nitrosodiethanolamine
U174
?
55-18-5?
Ethanamine, N-ethyl-N-nitroso-
U174
?
55-18-5?N-Nitrosodiethylamine
U176?
759-73-9
?
N-Nitroso-N-ethylurea
U176
?
759-73-9
?
Urea N-ethyl-N-nitroso-
U177
?
684-93-5?
N-Nitroso-N-methylurea
U177
?
684-93-5?
Urea, N-methyl-N-nitroso-
U178?
615-53-2
?
Carbamic acid, methylnitroso-, ethyl ester
U178?
615-53-2
?
N-Nitroso-N-methylurethane
U179
?
100-75-4?
N-Nitrosopiperidine
U179
?
100-75-4
?
Piperidine, 1-nitroso-
U180
?
930-55-2
?
N-Nitrosopyrrolidine
U180
?
930-55-2?
Pyrrolidine, 1-nitroso-
U181?
99-55-8?
Benzenamine, 2-methyl-5-nitro-
U181
?
99-55-8?
5-Nitro-o-toluidine
U 1 82
?
123-63-7?
Paraldehyde
U182
?
123-63-7?
1,3,5-Trioxane, 2,4,6-trimethyl-
U183
?
608-93-5?
Benzene, pentachloro-
U183?
608-93-5?
Pentachlorobenzene
U184
?
76-01-7?
Ethane, pentachloro-
U184
?
76-01-7?
Pentachloroethane
U185
?
82-68-8
?
Benzene, pentachloronitro-
U185
?
82-68-8?
Pentachloronitrobenzene (PCNB)
U186?
504-60-9?
1-Methylbutadiene (I)
U186?
504-60-9?
1,3-Pentadiene (I)
U187
?
62-44-2
?
Acetamide, N-(4-ethoxyphenyI)-
U187?
62-44-2?
Phenacetin
U188?
108-95-2
?
Phenol
U189
?
1314-80-3?
Phosphorus sulfide (R)
U189
?
1314-80-3?
Sulfur phosphide (R)
JCAR350721-0805030r01
U190
?
85-44-9
?
1,3-lsobenzofurandione
U190?
85-44-9
?
Phthalic anhydride
U191
?
109-06-8?
2-Picoline
U191
?
109-06-8?
Pyridine, 2-methyl-
U192?
23950-58-5?
Benzamide, 3,5-dichloro-N-(1,1-dimethy1-2-
propynyI)-
U192
?
23950-58-5?
Pronamide
U193
?
1120-71-4
?
1,2-Oxathiolane, 2,2-dioxide
U193?
1120-71-4?
1,3-Propane sultone
U194
?
107-10-8?
1-Propanamine (I, T)
U194
?
107-10-8?
n-Propylamine (I, T)
U196
?
110-86-1?
Pyridine
U197?
106-51-4
?
p-Benzoquinone
U197
?
106-51-4?
2,5-Cyclohexadiene-1,4-dione
U200
?
50-55-5?Reserpine
U200 50-55-5 Yohimban-16-carboxylic acid, 11,17-dimethoxy-
18-((3,4,5-trimethoxybenzoyl)oxy)-, methyl ester,
(313,16)3,17a,1813,20cc)-
U201?
108-46-3?
1,3-Benzenediol
U201?
108-46-3?
Resorcinol
U202
?
P 81-07-2?
1,2-Benzisothiazol-3(2H)-one, 1,1-dioxide, and
salts
U202
?
P 81-07-2
?
Saccharin and salts
U203
?
94-59-7?
1,3-BenzodiS
U203
?
94-59-7?Safrole
U204
?
7783-00-8?
Selenious acid
U204
?
7783-00-8
?
Selenium dioxide
U205?
7488-56-4?
Selenium sulfide
U205
?
7488-56-4
?
Selenium sulfide SeS
2
(R, T)
U206
?
18883-66-4
?
Glucopyranose, 2-deoxy-2-(3-methy1-3-
nitrosoureido)-, D-
U206
?
18883-66-4?
D-Glucose, 2-deoxy-2-(((methylnitrosoamino)-
carbon_yl)amino)-
U206
?
18883-66-4?
Streptozotocin
U207?
95-94-3?
Benzene, 1,2,4,5-tetrachloro-
U207
?
95-94-3?
1,2,4,5-Tetrachlorobenzene
U208
?
630-20-6
?
Ethane, 1,1,1,2-tetrachloro-
U208
?
630-20-6?
1,1,1,2-Tetrachloroethane
U209
?
79-34-5?Ethane, 1,1,2,2-tetrachloro-
U209
?
79-34-5
?
1,1,2,2-Tetrachloroethane
U210
?
127-18-4
?
Ethene, tetrachloro-
U210
?
127-18-4
?
Tetrachloroethylene
U211
?
56-23-5?
Carbon tetrachloride
JCAR350721-0805030r01
U211?
56-23-5?Methane tetrachloro-
U213
?
109-99-9
?
Furan tetrahydro- (I)
U213?
109-99-9?
Tetrahydrofuran (I)
U214?
563-68-8?
Acetic acid, thallium (1+) salt
U214?
563-68-8?
Thallium (I) acetate
U2I 5?
6533-73-9?
Carbonic acid, dithallium (1+) salt
U215
?
6533-73-9?
Thallium (I) carbonate
U216?
7791-12-0?
Thallium (I) chloride
U216
?
7791-12-0
?
Thallium chloride TIC1
U217?
10102-45-1?
Nitric acid, thallium (1+) salt
U217?
10102-45-1
?
Thallium (I) nitrate
U218?
62-55-5?
Ethanethioamide
U218?
62-55-5?Thioacetamide
U219
?
62-56-6
?
Thiourea
U220?
108-88-3?
Benzene, methyl-
U220?
108-88-3?
Toluene
U221?
25376-45-8?
Benzenediamine, ar-methyl-
U221?
25376-45-8?
Toluenediamine
U222?
636-21-5?
Benzenamine, 2-methyl-, hydrochloride
U222?
636-21-5?
o-Toluidine hydrochloride
U223
?
26471-62-5
?
Benzene 1 3-diisocyanatomethyl- (R T)
U223?
26471-62-5?
Toluene diisocyanate (R T)
U225
?
75-25-2
?
Bromoform
U225?
75-25-2?
Methane, tribromo-
U226?
71-55-6?
Ethane, 1,1,1-trichloro-
U226?
71-55-6?
Methylchloroform
U227?
79-00-5?Ethane 1 1 2-trichloro-
U227?
79-00-5?Ethane, 1,1,2-trichloro-
U227?
79-00-5?1 1 2-Trichloroethane
U228
?
79-01-6
?
Ethene, trichloro-
U228?
79-01-6?
Trichloroethylene
U234
?
99-35-4
?
Benzene 1,3,5-trinitro-
U234?
99-35-4
?
1,3,5-Trinitrobenzene (R, T)
U235
?
126-72-7?
1-Propanol, 2,3-dibromo-, phosphate (3:1)
U235
?
126-72-7
?
Tris(2,3-dibromopropyl) phosphate
U236?
72-57-1?
2,7-Naphthalenedisulfonic acid, 3,3'4(3,3'-
dimethyl-(1,1'-bipheny1)-4,41-diy1)bis(azo)bis(5-
amino-4-hydroxy)-, tetrasodium salt
U236?
72-57-1?Trypan blue
U237?
66-75-1?2,4-(1H,3H)-Pyrimidinedione, 5-(bis(2-
chloroethyDamino)-
U237
?
66-75-1
?
Uracil mustard
U238?
51-79-6?
Carbamic acid, ethyl ester
JCAR350721-0805030r01
U238
51-79-6
Ethyl carbamate (urethane)
U239
1330-20-7
Benzene, dimethyl- (1, T)
0239
1330-20-7
Xylene (I)
U240
P 94-75-7
Acetic acid, (2,4-dichlorophenoxy)-, salts and
esters
U240
P 94-75-7
2 4-D, salts and esters
U243
1888-71-7
Hexachloropropene
U243
1888-71-7
1-Propene, 1,1,2,3,3,3-hexachloro-
11244
137-26-8
Thioperoxydicarbonic diamide ((-12N)C(S))2S1
tetramethyl-
U244
137-26-8
Thiram
U246
506-68-3
Cyanogen bromide CNBr
U247
72-43-5
Benzene, 1,1'42,2,2-trichloroethylidene)bis(4-
methoxy-
U247
72-43-5
Methoxychlor
U248
P 81-81-2
2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-
phenylbuty1)-, and salts, when present at
concentrations of 0.3 percent or less
U248
P 81-81-2
Warfarin, and salts, when present at concentrations
of 0.3 percent or less
U249
1314-84-7
Zinc phosphide Zn3P2, when present at
concentrations of 10 percent or less
U271
17804-35-2
Benomyl
U271
17804-35-2
Carbamic acid, (1 -((butylamino)carbony1)-1H-
benzimidazo1-2-y1)-, methyl ester
U278
22781-23-3
Bendiocarb
U278
22781-23-3
1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl
carbamate
U279
63-25-2
Carbaryl
U279
63-25-2
1-Naphthalenol, methylcarbamate
U280
101-27-9
Barban
U280
101-27-9
Carbamic acid, (3-chloropheny1)-, 4-chloro-2-
butynyl ester
U328
95-53-4
Benzenamine, 2-methyl-
U328
95-53-4
o-Toluidine
U353
106-49-0
Benzenamine, 4-methyl-
U353
106-49-0
p-Toluidine
U359
110-80-5
Ethanol, 2-ethoxy-
U359
110-80-5
Ethylene glycol monoethyl ether
U364
22961-82-6
Bendiocarb phenol
U364
22961-82-6
1,3-Benzodioxo1-4-ol, 2,2-dimethyl-
U367
1563-38-8
7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-
U367
1563-38-8
Carbofuran phenol
JCAR350721-0805030r01
U372
?
10605-21-7
?
Carbamic acid, 1H-benzimidazol-2-yl, methyl ester
U372
?
10605-21-7?
Carbendazim
U373
?
122-42-9?
Carbamic acid, phenyl-, 1-methylethyl ester
U373
?
122-42-9?
Propham
U387?
52888-80-9
?
Carbamothioic acid, dipropyl-, S-(phenylmethyl)
ester
U387
?
52888-80-9?
Prosulfocarb
U389?
2303-17-5
?
Carbamothioic acid, bis(1-methylethyl)-, S-(2,3,3-
trichloro-2-propenyl) ester
U389
?
2303-17-5
?
Triallate
U394?
30558-43-1
?
A2213
U394?
30558-43-1
?
Ethanimidothioic acid, 2-(dimethylamino)-N-
hydroxy-2-oxo-, methyl ester
U395
?
5952-26-1?
Diethylene glycol, dicarbamate
U395?
5952-26-1
?
Ethanol, 2,2'-oxybis-, dicarbamate
U404
?
121-44-8?
Ethanamine, N,N-diethyl-
U404
?
121-44-8
?
Triethylamine
U409
?
23564-05-8
?
Carbamic acid, (1,2-
phenylenebis(iminocarbonothioyl))bis-, dimethyl
ester
U409
?
23564-05-8
?
Thiophanate-methyl
U410
?
59669-26-0?
Ethanimidothioic acid, N,N'-
(thiobis((methylimino)carbonyloxy))bis-, dimethyl
ester
U410
?
59669-26-0?
Thiodicarb
U411
?
114-26-1?
Phenol, 2-(1-methylethoxy)-, methylcarbamate
U411
?
114-26-1
?
Propoxur
2008
2009
?
(Source: Amended at 32 III. Reg.
?
, effective
?)
2010
2011?
SUBPART E: EXCLUSIONS AND EXEMPTIONS
2012
2013
?
Section 721.138 Comparable or Syngas Fuel Exclusion
2014
2015?
Wastes that meet the following comparable or syngas fuel requirements are not solid wastes:
2016
2017
?
a)?
Comparable fuel specifications.
2018
2019?
1)?
Physical specifications.
2020
2021
?
A)?
Heating value. The heating value must exceed 5,000 Btu/lb
2022?
(11,500
J/g).
2023
JCAR350721-0805030r01
2024
B)
Viscosity. The viscosity must not exceed 50 cs, as fired.
2025
2026
2)
Constituent specifications. For the compounds listed, the constituent
2027
specification levels and minimum required detection limits (where non-
2028
detect is the constituent specification) are set forth in the table at
2029
subsection (d) of this Section.
2030
2031
b)
Synthesis gas fuel specification. Synthesis gas fuel (i.e., syngas fuel) that is
2032
generated from hazardous waste must fulfill the following requirements:
2033
2034
1)
It must have a minimum Btu value of 100 Btu/Scf;
2035
2036
2)
It must contain less than 1 ppmv of total halogen;
2037
2038
3)
It must contain less than 300 ppmv of total nitrogen other than diatomic
2039
nitrogen (N2);
2040
2041
4)
It must contain less than 200 ppmv of hydrogen sulfide; and
2042
2043
5)
It must contain less than 1 ppmv of each hazardous constituent in the
2044
target list of constituents listed in Appendix
H
of this Part.
2045
2046
c)
Implementation. Waste that meets the comparable or syngas fuel specifications
2047
provided by subsection (a) or (b) of this Section (these constituent levels must be
2048
achieved by the comparable fuel when generated, or as a result of treatment or
2049
blending, as provided in subsection (c)(3) or (c)(4) of this Section) is excluded
2050
from the definition of solid waste provided that the following requirements are
2051
met:
2052
2053
1)
Notices. For purposes of this Section, the person claiming and qualifying
2054
for the exclusion is called the comparable or syngas fuel generator and the
2055
person burning the comparable or syngas fuel is called the comparable or
2056
syngas burner. The person that generates the comparable fuel or syngas
2057
fuel must claim and certify to the exclusion.
2058
2059
A)
Notice to the Agency.
2060
2061
i)
The generator must submit a one-time notice to the
2062
Agency, certifying compliance with the conditions of the
2063
exclusion and providing documentation, as required by
2064
subsection (c)(1)(A)(iii) of this Section;
2065
2066
ii)
If the generator is a company that generates comparable or
JCAR350721-0805030r01
2067
syngas fuel at more than one facility, the generator must
2068
specify at which sites the comparable or syngas fuel will be
2069
generated;
2070
2071
A comparable or syngas fuel generator's notification to the
2072
Agency must contain the items listed in subsection
2073
(c)(1)(C) of this Section.
2074
2075
B)
Public notice. Prior to burning an excluded comparable or syngas
2076
fuel, the burner must publish in a major newspaper of general
2077
circulation, local to the site where the fuel will be burned, a notice
2078
entitled "Notification of Burning a Comparable or Syngas Fuel
2079
Excluded Under the Resource Conservation and Recovery Act"
2080
containing the following information:
2081
2082
i)
The name, address, and USEPA identification number of
2083
the generating facility;
2084
2085
The name and address of the units that will burn the
2086
comparable or syngas fuel;
2087
2088
iii)
A brief, general description of the manufacturing,
2089
treatment, or other process generating the comparable or
2090
syngas fuel;
2091
2092
An estimate of the average and maximum monthly and
2093
annual quantity of the waste claimed to be excluded; and
2094
2095
v)
The name and mailing address of the Agency office to
2096
which the claim was submitted.
2097
2098
C)
Required content of comparable or syngas notification to the
2099
Agency.
2100
2101
i)
The name, address, and USEPA identification number of
2102
the person or facility claiming the exclusion;
2103
2104
The applicable USEPA hazardous waste codes for the
2105
hazardous waste;
2106
2107
The name and address of the units that meet the
2108
requirements of subsection (c)(2) of this Section that will
2109
burn the comparable or syngas fuel; and
JCAR350721-0805030r01
2110
2111
iv)
The following statement, signed and submitted by the
2112
person claiming the exclusion or its authorized
2113
representative:
2114
2115
Under penalty of criminal and civil prosecution for
2116
making or submitting false statements,
2117
representations, or omissions, I certify that the
2118
requirements of 35 III. Adm. Code 721.138 have
2119
been met for all waste identified in this notification.
2120
Copies of the records and information required by
2121
35 Ill. Adm. Code 721.138(c)(10) are available at
2122
the comparable or syngas fuel generator's facility.
2123
Based on my inquiry of the individuals immediately
2124
responsible for obtaining the information, the
2125
information is, to the best of my knowledge and
2126
belief, true, accurate, and complete. I am aware
2127
that there are significant penalties for submitting
2128
false information, including the possibility of fine
2129
and imprisonment for knowing violations.
2130
2131
BOARD NOTE: Subsections (c)(1)(C)(i) through (c)(1)(C)(iv) are
2132
derived from 40 CFR 261.138(c)(1)(i)(C)(1) and (c)(1)(i)(C)(4),
2133
which the Board has codified here to comport with Illinois
2134
Administrative Code format requirements.
2135
2136
2)
Burning. The comparable or syngas fuel exclusion for fuels that meet the
2137
requirements of subsections (a) or (b) and (c)(I) of this Section applies
2138
only if the fuel is burned in the following units that also must be subject to
2139
federal, State, and local air emission requirements, including all applicable
2140
federal Clean Air Act (CAA) maximum achievable control technology
2141
(MACT) requirements:
2142
2143
A)
Industrial furnaces, as defined in 35 Ill. Adm. Code 720.110;
2144
2145
B)
Boilers, as defined in 35 III. Adm. Code 720.110, that are further
2146
defined as follows:
2147
2148
i)
Industrial boilers located on the site of a facility engaged in
2149
a manufacturing process where substances are transformed
2150
into new products, including the component parts of
2151
products, by mechanical or chemical processes; or
2152
JCAR350721-0805030r01
2153
Utility boilers used to produce electric power, steam,
2154
heated or cooled air, or other gases or fluids for sale;
2155
2156
C)
Hazardous waste incinerators subject to regulation pursuant to
2157
Subpart 0 of 35
III.
Adm. Code 724 or Subpart 0 of 35 Ill. Adm.
2158
Code 725 or applicable CAA MACT standards.
2159
2160
D)
Gas turbines used to produce electric power, steam, heated or
2161
cooled air, or other gases or fluids for sale.
2162
2163
3)
Blending to meet the viscosity specification. A hazardous waste blended
2164
to meet the viscosity specification must fulfill the following requirements:
2165
2166
A)
As generated and prior to any blending, manipulation, or
2167
processing, the waste must meet the constituent and heating value
2168
specifications of subsections (a)(1)(A) and (a)(2) of this Section;
2169
2170
B)
The waste must be blended at a facility that is subject to the
2171
applicable requirements of 35 III. Adm. Code 724 and 725 or 35
2172
III. Adm. Code 722.134; and
2173
2174
C)
The waste must not violate the dilution prohibition of subsection
2175
(c)(6) of this Section.
2176
2177
4)
Treatment to meet the comparable fuel exclusion specifications.
2178
2179
A)
A hazardous waste may be treated to meet the exclusion
2180
specifications of subsections (a)(I) and (a)(2) of this Section
2181
provided the treatment fulfills the following requirements:
2182
2183
i)
The treatment destroys or removes the constituent listed in
2184
the specification or raises the heating value by removing or
2185
destroying hazardous constituents or materials;
2186
2187
ii)
The treatment is performed at a facility that is subject to the
2188
applicable requirements of 35 III. Adm. Code 724 and 725
2189
or 35 III. Adm. Code 722.134; and
2190
2191
iii)
The treatment does not violate the dilution prohibition of
2192
subsection (c)(6) of this Section.
2193
2194
B)
Residuals resulting from the treatment of a hazardous waste listed
2195
in Subpart
D
of this Part to generate a comparable fuel remain a
JCAR350721-0805030r01
2196
hazardous waste.
2197
2198
5)
Generation of a syngas fuel.
2199
2200
A)
A syngas fuel can be generated from the processing of hazardous
2201
wastes to meet the exclusion specifications of subsection (b) of this
2202
Section provided the processing fulfills the following
2203
requirements:
2204
2205
i)
The processing destroys or removes the constituent listed in
2206
the specification or raises the heating value by removing or
2207
destroying constituents or materials;
2208
2209
The processing is performed at a facility that is subject to
2210
the applicable requirements of 35 Ill. Adm. Code 724 and
2211
725 or 35 Ill. Adm. Code 722.134 or is an exempt recycling
2212
unit pursuant to Section 721.106(c); and
2213
2214
iii)
The processing does not violate the dilution prohibition of
2215
subsection (c)(6) of this Section.
2216
2217
B)
Residuals resulting from the treatment of a hazardous waste listed
2218
in Subpart D of this Part to generate a syngas fuel remain a
2219
hazardous waste.
2220
2221
6)
Dilution prohibition for comparable and syngas fuels. No generator,
2222
transporter, handler, or owner or operator of a treatment, storage, or
2223
disposal facility must in any way dilute a hazardous waste to meet the
2224
exclusion specifications of subsection (a)(1)(A), (a)(2), or (b) of this
2225
Section.
2226
2227
7)
Waste analysis plans. The generator of a comparable or syngas fuel must
2228
develop and follow a written waste analysis plan that describes the
2229
procedures for sampling and analysis of the hazardous waste to be
2230
excluded. The plan must be followed and retained at the facility excluding
2231
the waste.
2232
2233
A)
At a minimum, the plan must specify the following:
2234
2235
i)
The parameters for which each hazardous waste will be
2236
analyzed and the rationale for the selection of those
2237
parameters;
2238
JCAR350721-0805030r01
2239
The test methods that will be used to test for these
2240
parameters;
2241
2242
iii)
The sampling method that will be used to obtain a
2243
representative sample of the waste to be analyzed;
2244
2245
The frequency with which the initial analysis of the waste
2246
will be reviewed or repeated to ensure that the analysis is
2247
accurate and up to date; and
2248
2249
v)
If process knowledge is used in the waste determination,
2250
any information prepared by the generator in making such
2251
determination.
2252
2253
B)
The waste analysis plan must also contain records of the following:
2254
2255
i)
The dates and times waste samples were obtained, and the
2256
dates the samples were analyzed;
2257
2258
ii)
The names and qualifications of the persons who obtained
2259
the samples;
2260
2261
iii)
A description of the temporal and spatial locations of the
2262
samples;
2263
2264
iv)
The name and address of the laboratory facility at which
2265
analyses of the samples were performed;
2266
2267
v)
A description of the analytical methods used, including any
2268
clean-up and sample preparation methods;
2269
2270
vi)
All quantitation limits achieved and all other quality control
2271
results for the analysis (including method blanks, duplicate
2272
analyses, matrix spikes, etc.), laboratory quality assurance
2273
data, and description of any deviations from analytical
2274
methods written in the plan or from any other activity
2275
written in the plan that occurred;
2276
2277
vii)
All laboratory results demonstrating that the exclusion
2278
specifications have been met for the waste; and
2279
2280
viii) All laboratory documentation that supports the analytical
2281
results, unless a contract between the claimant and the
JCAR350721-0805030r01
2282
laboratory provides for the documentation to be maintained
2283
by the laboratory for the period specified in subsection
2284
(c)(11) of this Section and also provides for the availability
2285
of the documentation to the claimant upon request.
2286
2287
C)
Syngas fuel generators must submit for approval, prior to
2288
performing sampling, analysis, or any management of a syngas
2289
fuel as an excluded waste, a waste analysis plan containing the
2290
elements of subsection (c)(7)(A) of this Section to the Agency.
2291
The approval of waste analysis plans must be stated in writing and
2292
received by the facility prior to sampling and analysis to
2293
demonstrate the exclusion of a syngas. The approval of the waste
2294
analysis plan may contain such provisions and conditions as the
2295
regulatory authority deems appropriate.
2296
2297
8)
Comparable fuel sampling and analysis.
2298
2299
A)
General. For each waste for which an exclusion is claimed, the
2300
generator of the hazardous waste must test for all the constituents
2301
on Appendix H of this Part, except those that the generator
2302
determines, based on testing or knowledge, should not be present
2303
in the waste. The generator is required to document the basis of
2304
each determination that a constituent should not be present. The
2305
generator may not determine that any of the following categories
2306
of constituents should not be present:
2307
2308
A constituent that triggered the toxicity characteristic for
2309
the waste constituents that were the basis of the listing of
2310
the waste stream, or constituents for which there is a
2311
treatment standard for the waste code in 35
Adm. Code
2312
728.140;
2313
2314
A constituent detected in previous analysis of the waste;
2315
2316
iii)
Constituents introduced into the process that generates the
2317
waste; or
2318
2319
iv)
Constituents that are byproducts or side reactions to the
2320
process that generates the waste.
2321
2322
B)
For each waste for which the exclusion is claimed where the
2323
generator of the comparable or syngas fuel is not the original
2324
generator of the hazardous waste, the generator of the comparable
JCAR350721-0805030r01
2325
or syngas fuel may not use process knowledge pursuant to
2326
subsection (c)(8)(A) of this Section and must test to determine that
2327
all of the constituent specifications of subsections (a)(2) and (b) of
2328
this Section have been met.
2329
2330
C)
The comparable or syngas fuel generator may use any reliable
2331
analytical method to demonstrate that no constituent of concern is
2332
present at concentrations above the specification levels. It is the
2333
responsibility of the generator to ensure that the sampling and
2334
analysis are unbiased, precise, and representative of the waste. For
2335
the waste to be eligible for exclusion, a generator must
2336
demonstrate the following:
2337
2338
That each constituent of concern is not present in the waste
2339
above the specification level at the 95 percent upper
2340
confidence limit around the mean; and
2341
2342
That the analysis could have detected the presence of the
2343
constituent at or below the specification level at the 95
2344
percent upper confidence limit around the mean.
2345
2346
D)
Nothing in this subsection (c)(8) preempts, overrides, or otherwise
2347
negates the provision in 35 Ill. Adm. Code 722.111 that requires
2348
any person that generates a solid waste to determine if that waste is
2349
a hazardous waste.
2350
2351
E)
In an enforcement action, the burden of proof to establish
2352
conformance with the exclusion specification must be on the
2353
generator claiming the exclusion.
2354
2355
F)
The generator must conduct sampling and analysis in accordance
2356
with its waste analysis plan developed pursuant to subsection
2357
(c)(7) of this Section.
2358
2359
G)
Syngas fuel and comparable fuel that has not been blended in order
2360
to meet the kinematic viscosity specifications must be analyzed as
2361
generated.
2362
2363
H)
If a comparable fuel is blended in order to meet the kinematic
2364
viscosity specifications, the generator must undertake the
2365
following actions:
2366
2367
i)
Analyze the fuel as generated to ensure that it meets the
JCAR350721-0805030r01
2368
constituent and heating value specifications; and
2369
2370
After blending, analyze the fuel again to ensure that the
2371
blended fuel continues to meet all comparable or syngas
2372
fuel specifications.
2373
2374
I)
Excluded comparable or syngas fuel must be retested, at a
2375
minimum, annually and must be retested after a process change
2376
that could change the chemical or physical properties of the waste.
2377
2378
BOARD NOTE: Any claim pursuant to this Section must be valid and
2379
accurate for all hazardous constituents; a determination not to test for a
2380
hazardous constituent will not shield a generator from liability should that
2381
constituent later be found in the waste above the exclusion specifications.
2382
2383
9)
Speculative accumulation. Any persons handling a comparable or syngas
2384
fuel are subject to the speculative accumulation test pursuant to Section
2385
721.102(c)(4).
2386
2387
10)
Records. The generator must maintain records of the following
2388
information on-site:
2389
2390
A)
All information required to be submitted to the implementing
2391
authority as part of the notification of the claim:
2392
2393
i)
The owner or operator name, address, and RCRA facility
2394
USEPA identification number of the person claiming the
2395
exclusion;
2396
2397
The applicable USEPA hazardous waste codes for each
2398
hazardous waste excluded as a fuel; and
2399
2400
iii)
The certification signed by the person claiming the
2401
exclusion or his authorized representative;
2402
2403
B)
A brief description of the process that generated the hazardous
2404
waste and process that generated the excluded fuel, if not the same;
2405
2406
C)
An estimate of the average and maximum monthly and annual
2407
quantities of each waste claimed to be excluded;
2408
2409
D)
Documentation for any claim that a constituent is not present in the
2410
hazardous waste, as required pursuant to subsection (c)(8)(A) of
JCAR350721-0805030r01
2411
this Section;
2412
2413
E)
The results of all analyses and all detection limits achieved, as
2414
required pursuant to subsection (c)(8) of this Section;
2415
2416
F)
If the excluded waste was generated through treatment or blending,
2417
documentation, as required pursuant to subsection (c)(3) or (c)(4)
2418
of this Section;
2419
2420
G)
If the waste is to be shipped off-site, a certification from the
2421
burner, as required pursuant to subsection (c)(12) of this Section;
2422
2423
H)
A waste analysis plan and the results of the sampling and analysis
2424
that include the following:
2425
2426
i)
The dates and times waste samples were obtained, and the
2427
dates the samples were analyzed;
2428
2429
ii)
The names and qualifications of the persons that obtained
2430
the samples;
2431
2432
iii)
A description of the temporal and spatial locations of the
2433
samples;
2434
2435
iv)
The name and address of the laboratory facility at which
2436
analyses of the samples were performed;
2437
2438
v)
A description of the analytical methods used, including any
2439
clean-up and sample preparation methods;
2440
2441
All quantitation limits achieved and all other quality control
2442
results for the analysis (including method blanks, duplicate
2443
analyses, matrix spikes, etc.), laboratory quality assurance
2444
data, and description of any deviations from analytical
2445
methods written in the plan or from any other activity
2446
written in the plan that occurred;
2447
2448
vii)
All laboratory analytical results demonstrating that the
2449
exclusion specifications have been met for the waste; and
2450
2451
viii) All laboratory documentation that supports the analytical
2452
results, unless a contract between the claimant and the
2453
laboratory provides for the documentation to be maintained
JCAR350721-0805030r01
2454
by the laboratory for the period specified in subsection
2455
(c)(11) of this Section and also provides for the availability
2456
of the documentation to the claimant upon request; and
2457
2458
I)
If the generator ships comparable or syngas fuel off-site for
2459
burning, the generator must retain for each shipment the following
2460
information on-site:
2461
2462
The name and address of the facility receiving the
2463
comparable or syngas fuel for burning;
2464
2465
ii)
The quantity of comparable or syngas fuel shipped and
2466
delivered;
2467
2468
iii)
The date of shipment or delivery;
2469
2470
A cross-reference to the record of comparable or syngas
2471
fuel analysis or other information used to make the
2472
determination that the comparable or syngas fuel meets the
2473
specifications, as required pursuant to subsection (c)(8) of
2474
this Section; and
2475
2476
v)
A one-time certification by the burner, as required pursuant
2477
to subsection (c)(12) of this Section.
2478
2479
11)
Records retention. Records must be maintained for the period of three
2480
years. A generator must maintain a current waste analysis plan during that
2481
three-year period.
2482
2483
12)
Burner certification. Prior to submitting a notification to the Agency, a
2484
comparable or syngas fuel generator that intends to ship its fuel off-site for
2485
burning must obtain a one-time written, signed statement from the burner
2486
that includes the following:
2487
2488
A)
A certification that the comparable or syngas fuel will only be
2489
burned in an industrial furnace or boiler, utility boiler, or
2490
hazardous waste incinerator, as required pursuant to subsection
2491
(c)(2) of this Section;
2492
2493
B)
Identification of the name and address of the units that will burn
2494
the comparable or syngas fuel; and
2495
2496
C)
A certification that the state in which the burner is located is
JCAR350721-0805030r01
2497
authorized to exclude wastes as comparable or syngas fuel under
2498
the provisions of 40 CFR 261.38.
2499
2500
13)
Ineligible waste codes. Wastes that are listed because of presence of
2501
dioxins or furans, as set out in Appendix G of this Part, are not eligible for
2502
this exclusion, and any fuel produced from or otherwise containing these
2503
wastes remains a hazardous waste subject to full RCRA hazardous waste
2504
management requirements.
2505
2506
d)
AppendixTablc Y of this Part sets forth the table of detection and detection limit
2507
values for comparable fuel specification.
2508
2509
(Source: Amended at 32 Ill. Reg.
, effective
2510
2511
Section 721.139
Conditional Exclusion for Used, Broken CRTs and Processed CRT Glass
2512 Undergoing Recycling
2513
2514
Used, broken CRTs are not solid waste if they meet the following conditions:
2515
2516 a)
Prior to CRT processing. These materials are not solid wastes if they are destined
2517
for recycling and they meet the following requirements:
2518
2519
1)
Storage. The broken CRTs must be managed in either of the following
2520
ways:
2521
2522
A)
They are stored in a building with a roof, floor, and walls; or
2523
2524
B)
They are placed in a container (i.e., a package or a vehicle) that is
2525
constructed, filled, and closed to minimize releases to the
2526
environment of CRT glass (including fine solid materials).
2527
2528
2.1
Labeling. Each container in which the used, broken CRT is contained
2529
must be labeled or marked clearly with one of the following phrases:
2530
"Used cathode ray tubes – contains leaded glass" or "Leaded glass from
2531
televisions or computers." It must also be labeled with the following
2532
statement: "Do not mix with other glass materials."
2533
2534
3)
Transportation. The used, broken CRTs must be transported in a container
2535
meeting the requirements of subsections (a)(1)(B) and (a)(2) of this
2536
Section.
2537
2538
41
Speculative accumulation and use constituting disposal. The used, broken
2539
CRTs are subject to the limitations on speculative accumulation, as
JCAR350721-0805030r01
2540
defined in subsection (c)(8) of this Section. If they are used in a manner
2541
constituting disposal, they must comply with the applicable requirements
2542
of Subpart C of 40 CFR 726, instead of the requirements of this Section.
2543
2544
5)?
Exports. In addition to the applicable conditions specified in subsections
2545
(a)(1) through (a)(4) of this Section, an exporter of used, broken CRTs
2546
must comply with the following requirements:
2547
2548
Al?
It must notify the Agency and USEPA of an intended export before
2549
the CRTs are scheduled to leave the United States. A complete
2550
notification should be submitted 60 days before the initial
2551
shipment is intended to be shipped off-site. This notification may
2552
cover export activities extending over a 12-month or shorter
2553
period. The notification must be in writing, signed by the exporter,
2554
and include the following information:
2555
2556
i)
The name, mailing address, telephone number and USEPA
2557
ID number (if applicable) of the exporter of the CRTs.
2558
2559
ii
The estimated frequency or rate at which the CRTs are to
2560
be exported and the period of time over which they are to
2561
be exported.
2562
2563
iii
The estimated total quantity of CRTs specified in
2564
kilograms.
2565
2566
iv
All points of entry to and departure from each foreign
2567
country through which the CRTs will pass.
2568
2569
y)
A description of the means by which each shipment of the
2570
CRTs will be transported (e.g., mode of transportation
2571
vehicle (air, highway, rail, water, etc.), types of container
2572
(drums, boxes, tanks, etc.)).
2573
2574
vi
)
The name and address of the recycler and any alternate
2575
recycler.
2576
2577
A description of the manner in which the CRTs will be
2578
recycled in the foreign country that will be receiving the
2579
CRTs.
2580
2581
viii) The name of any transit
country
through which the CRTs
2582
?
will
be sent and a description of the approximate length of
JCAR350721-0805030r01
2583
time the CRTs will remain in such country and the nature
2584
of their handling while there.
2585
2586
a)
?
Notifications submitted. Whether delivered by mail or hand-
2587
delivered the following words must be prominently displayed on
2588
the front of any envelope containing an export notification:
2589
"Attention: Notification of Intent to Export CRTs."
2590
2591
ij
An export notification submitted to USEPA by mail must
2592
be sent to the following mailing address:
2593
2594
Office of Enforcement and Compliance Assurance
2595
Office of Federal Activities, International
2596
Compliance Assurance Division (Mail Code
2597
2254A)
2598
Environmental Protection Agency
2599
1200 Pennsylvania Ave., NW
2600
Washington DC 20460
2601
2602
al
An export notification hand-delivered to USEPA must be
2603
sent to:
2604
2605
Office of Enforcement and Compliance Assurance
2606
Office of Federal Activities, International
2607
Compliance Assurance Division (Mail Code
2608
2254A)
2609
Environmental Protection Agency
2610
Ariel Rios Bldg., Room 6144
2611
1200 Pennsylvania Ave., NW
2612
Washington DC
2613
2614
hi)
An export notification submitted to the Agency by mail or
2615
hand-delivered must be sent to the following mailing
2616
address:
2617
2618
Illinois Environmental Protection Agency
2619
Bureau of Land Pollution Control
2620
1021 North Grand Ave East
2621
P.O. Box 19276
2622
Springfield IL 62794-9276
2623
JCAR350721-0805030r01
2624
Q
Upon request by the Agency or USEPA, the exporter must furnish
2625
to the Agency and USEPA any additional information which a
2626
receiving country requests in order to respond to a notification.
2627
2628
Pi?
USEPA has stated that it will provide a complete notification to the
2629
receiving country and any transit countries. A notification is
2630
complete when the Agency and USEPA receives a notification that
2631
USEPA determines satisfies the requirements of subsection
2632
(a)(5)(A) of this Section. Where a claim of confidentiality is
2633
asserted with respect to any notification information required by
2634
subsection (a)(5)(A) of this Section, USEPA has stated that it may
2635
find the notification not complete until any such claim is resolved
2636
in accordance with 40 CFR 260.2.
2637
2638
Q
The export of CRTs is prohibited, unless the receiving country
2639
consents to the intended export. When the receiving country
2640
consents in writing to the receipt of the CRTs, USEPA has stated
2641
that it will forward an Acknowledgment of Consent to Export
2642
CRTs to the exporter. Where the receiving country objects to
2643
receipt of the CRTs or withdraws a prior consent, USEPA has
2644
stated that it will notify the exporter in writing. USEPA has stated
2645
that it will also notify the exporter of any responses from transit
2646
countries.
2647
2648
When the conditions specified on the original notification change,
2649
the exporter must provide the Agency and USEPA with a written
2650
renotification of the change, except for changes to the telephone
2651
number in subsection (a)(5)(A)(i) of this Section and decreases in
2652
the quantity indicated pursuant to subsection (a)(5)(A)(iii) of this
2653
Section. The shipment cannot take place until consent of the
2654
receiving country to the changes has been obtained (except for
2655
changes to information about points of entry and departure and
2656
transit countries pursuant to subsections (a)(5)(A)(iv) and
2657
(a)(5)(A)(viii) of this Section) and the exporter of CRTs receives
2658
from USEPA a copy of the Acknowledgment of Consent to Export
2659
CRTs reflecting the receiving country's consent to the changes.
2660
2661
Gj
A copy of the Acknowledgment of Consent to Export CRTs must
2662
accompany the shipment of CRTs. The shipment must conform to
2663
the terms of the Acknowledgment.
2664
2665
If a shipment of CRTs cannot be delivered for any reason to the
2666
recycler or the alternate recycler, the exporter of CRTs must
JCAR350721-0805030r01
2667
renotify the Agency and USEPA of a change in the conditions of
2668
the original notification to allow shipment to a new recycler in
2669
accordance with subsection (a)(5)(F) of this Section and obtain
2670
another Acknowledgment of Consent to Export CRTs.
2671
2672
An exporter must keep copies of notifications and
2673
Acknowledgments of Consent to Export CRTs for a period of three
2674
years following receipt of the Acknowledgment.
2675
2676
BOARD NOTE: Corresponding 40 CFR 261.39(a)(5) requires communications
2677
relating to export of CRTs between the exporter and USEPA. It is clear that
2678
USEPA intends to maintain its central role between the exporter and the export-
2679
receiving country and it granting authorization to export. Nevertheless, the Board
2680
has required the exporter submit to the Agency also whatever notifications it must
2681
submit to USEPA relating to the export. The intent is to facilitate the Agency's
2682
efforts towards assurance of compliance with the regulations as a whole, and not
2683
to require a separate authorization for export by the Agency,
2684
2685
Requirements for used CRT processing. Used, broken CRTs undergoing CRT
2686
processing, as defined in 35 III. Adm. Code 720.110, are not solid waste if they
2687
meet the following requirements:
2688
2689
lj
Storage. Used, broken CRTs undergoing CRT processing are subject to
2690
the requirement of subsection (a)(4) of this Section.
2691
2692 2)
CRT processing.
2693
2694
Aff
All activities specified in the second and third paragraphs of the
2695
definition of "CRT processing" in 35 III. Adm. Code 720.110 must
2696
be performed within a building with a roof, floor, and walls; and
2697
2698
BOARD NOTE: The activities specified in the second and third
2699
paragraphs of the definition of "CRT processing" are "intentionally
2700
breaking intact CRTs or further breaking or separating broken
2701
CRTs" and "sorting or otherwise managing glass removed from
2702
CRT monitors."
2703
2704
1131
No activities may be performed that use temperatures high enough
2705
to volatilize lead from CRTs.
2706
2707
Glass from CRT processing that is sent to CRT glass making or lead smelting.
2708
Glass from CRT processing that is destined for recycling at a CRT glass
JCAR350721-0805030r01
manufacturer or a lead smelter after CRT processing is not a solid waste unless it
is speculatively accumulated, as defined in Section 721.101(c)(8).
2712
(I)
Use constituting disposal. Glass from CRT processing that is used in a manner
2713
constituting disposal must comply with the requirements of Subpart C of 35 Ill.
2714
Adm. Code 726 instead of the re
q
uirements of this Section.
2715
2716
(Source: Added at 32 III. Reg.
effective
2717
2718
Section
721.140 Conditional Exclusion for Used, Intact
CRTs Exported
for Recycling
2719
2720
Used, intact CRTs exported for recycling are not solid waste if they meet the notice and consent
2721
conditions of Section 721.139(a)(5) and they are not speculatively accumulated, as defined in
2722
Section 721.101(c)(8).
2723
2724 (Source: Added at 32 Ill. Reg.
, effective
2725
2726
Section
721.141
Notification and Recordkeeping for Used, Intact CRTs Exported for Reuse
2727
2728
A person that exports used, intact CRTs for reuse must send a one-time
2729
notification to the Agency and the Regional Administrator of USEPA Region 5.
2730
The notification must include a statement that the notifier plans to export used,
2731
intact CRTs for reuse, the notifier's name, address, and USEPA ID number (if
2732
applicable), and the name and phone number of a contact person.
2733
2734
LP)
A person that exports used, intact CRTs for reuse must keep copies of normal
2735
business records, such as contracts, demonstrating that each shipment of exported
2736
CRTs will be reused. This documentation must be retained for a period of at least
2737
three years from the date the CRTs were exported.
2738
2739
(Source: Added at 32 III. Reg.
, effective
2709
2710
2711
JCAR350721-0805030r01
2740
Section 721.APPENDIX H Hazardous Constituents
2741
Chemical
USEPA
Abstracts
Hazardous
Number
Waste
Common Name
Chemical Abstracts Name
(CAS No.)
Number
A2213
Ethanimidothioic acid, 2-
30558-43-1
U394
(dimethylamino)-N-hydroxy-2-oxo-,
methyl ester
Acetonitrile
Same
75-05-8
U003
Acetophenone
Ethanone, 1-phenyl-
98-86-2
U004
2-Acetylaminofluorene
Acetamide, N-9H-fluoren-2-yl-
53-96-3
U005
Acetyl chloride
Same
75-36-5
U006
1-Acetyl-2-thiourea
Acetamide, N-(aminothioxomethyl)-
591-08-2
P002
Acrolein
2-Propenal
107-02-8
P003
Acrylamide
2-Propenamide
79-06-1
U007
Acrylonitrile
2-Propenenitrile
107-13-1
U009
Aflatoxins
Same
1402-68-2
Aldicarb
Propanal, 2-methyl-2-(methylthio)-,
O-((methylamino)carbonyl)oxime
116-06-3
P070
Aldicarb sulfone
Propanal, 2-methy1-2-
1646-88-4
P203
(methylsulfony1)-, 0-
((methylamino)carbonyl)oxime
Aldrin
1,4,5,8-Dimethanonaphthalene,
1,2,3,4,10,10-hexachloro-
309-00-2
P004
1,4,4a,5,8,8a-hexahydro-, (I-cc,4-
a,4a-(3,5-cc,8-a,8a-13)-
Allyl alcohol
2-Propen-l-ol
107-18-6
P005
Allyl chloride
1-Propene, 3-chloro-
107-05-1
107 18 6
Aluminum phosphide
Same
20859-73-8
P006
4-Aminobiphenyl
(1,1'-Biphenyl)-4-amine
92-67-1
5-(Aminomethyl)-3-isoxazolol
3(2H)-Isoxazolone, 5-(amino-
methyl)-
2763-96-4
P007
4-Aminopyridine
4-Pyridinamine
504-24-5
P008
Amitrole
1H-1,2,4-Triazol-3-amine
61-82-5
U011
Ammonium vanadate
Vanadic acid, ammonium salt
7803-55-6
U119
Aniline
Benzenamine
62-53-3
U012
o-Anisidine (2-methoxyaniline)
Benzenamine, 2-Methoxy-
90-04-0
Antimony
Same
7440-36-0
Antimony compounds, N.O.S. (not
otherwise specified)
JCAR350721-0805030r01
Aramite
Sulfurous acid, 2-chloroethyl-, 2(4-
140-57-8
(1,1-dimethylethyl)phenoxy)-1 -
methylethyl ester
Arsenic
Arsenic
7440-38-2
Arsenic compounds, N.O.S.
Arsenic acid
Arsenic acid H3AsO4
7778-39-4
P010
Arsenic pentoxide
Arsenic oxide As205
1303-28-2
P011
Arsenic trioxide
Arsenic oxide Ac
-
-2 - 3
1327-53-3
P012
Auramine
Benzenamine, 4,4'-carbon-
imidoylbis(N, N-dimethyl-
492-80-8
U014
Azaserine
L-Serine, diazoacetate (ester)
115-02-6
U015
Barban
Carbamic acid, (3-chlorophenyl)-, 4-
chloro-2-butynyl ester
101-27-9
U280
Barium
Same
7440-39-3
Barium compounds, N.O.S.
Barium cyanide
Same
542-62-1
P013
Bendiocarb
1,3-Benzodioxo1-4-01-2,2-dimethyl-,
methyl carbamate
22781-23-3
U278
Bendiocarb phenol
1,3-Benzodioxo1-4-o1-2,2-dimethyl-,
22961-82-6
U364
Benomyl
Carbamic acid, (1-
17804-35-2
U271
((butylamino)carbony1)-1H-
benzimidazol-2-y1)-, methyl ester
Benz(c)acridine
Same
225-51-4
U016
Benz(a)anthracene
Same
56-55-3
U018
Benzal chloride
Benzene, (dichloromethyl)-
98-87-3
U017
Benzene
Same
71-43-2
U018
Benzenearsonic acid
Arsonic acid, phenyl-
98-05-5
Benzidine
(1,1'-BiphenyI)-4,4'-diamine
92-87-5
UO21
Benzo(b)fluoranthene
Benz(e)acephenanthrylene
205-99-2
Benzo(j)fluoranthene
Same
205-82-3
Benzo(k)fluoranthene
Same
207-08-9
Benzo(a)pyrene
Same
50-32-8
UO22
p-Benzoquinone
2,5-Cyclohexadiene-1,4-dione
106-51-4
U197
Benzotrichloride
Benzene, (trichloromethyl)-
98-07-7
UO23
Benzyl chloride
Benzene, (chloromethyl)-
100-44-7
P028
Beryllium powder
Same
7440-41-7
P015
Beryllium compounds, N.O.S.
Bis(pentamethylene)thiuram
tetrasulfide
Piperidine, 1,1'-
(tetrathiodicarbonothioy1)-bis-
120-54-7
Bromoacetone
2-Propanone, 1-bromo-
598-31-2
P017
Bromoform
Methane, tribromo-
75-25-2
U225
4-Bromophenyl phenyl ether
Benzene, 1-bromo-4-phenoxy-
101-55-3
UO30
Brucine
Strychnidin-10-one, 2,3-dimethoxy-
357-57-3
P018
JCAR350721-0805030r01
Butylate
Carbamothioic acid, bis(2-
methylpropy1)-, S-ethyl ester
2008-41-5
Butyl benzyl phthalate
1,2-Benzenedicarboxylic acid, butyl
phenylmethyl ester
85-68-7
Cacodylic acid
Arsenic acid, dimethyl-
75-60-5
U136
Cadmium
Same
7440-43-9
Cadmium compounds, N.O.S.
Calcium chromate
Chromic acid H
2
CrO
4
, calcium salt
13765-19-0
UO32
Calcium cyanide
Calcium cyanide Ca(CN)2
592-01-8
P021
Carbaryl
1-Naphthalenol, methylcarbamate
63-25-2
U279
Carbendazim
Carbamic acid, 1H-benzimidazol-2-
yl, methyl ester
10605-21-7
U372
Carbofuran
7-Benzofuranol, 2,3-dihydro-2,2-
dimethyl-, methylcarbamate
1563-66-2
P127
Carbofuran phenol
7-Benzofuranol, 2,3-dihydro-2,2-
dimethyl-
1563-38-8
U367
Carbosulfan
Carbamic acid, ((dibutylamino)thio)
methy1-2,3-dihydro-2,2-dimethy1-7-
benzofuranyl ester
55285-14-8
P189
Carbon disulfide
Same
75-15-0
P022
Carbon oxyfluoride
Carbonic difuoride
353-50-4
UO33
Carbon tetrachloride
Methane, tetrachloro-
56-23-5
U211
Chloral
Acetaldehyde, trichloro-
75-87-6
UO34
Chlorambucil
Benzenebutanoic acid, 4(bis-(2-
chloroethyl)amino)-
305-03-3
UO35
Chlordane
4,7-Methano-1H-indene,
1,2,4,5,6,7,8,8-octachloro-
57-74-9
UO36
2,3,3a,4,7,7a-hexahydro-
Chlordane, a and
y
isomers
UO36
Chlorinated benzenes, N.O.S.
Chlorinated ethane, N.O.S.
Chlorinated fluorocarbons, N.O.S.
Chlorinated naphthalene, N.O.S.
Chlorinated phenol, N.O.S.
Chlomaphazine
Naphthalenamine, N,1\11-bis(2-
chloroethyl)-
494-03-1
UO26
Chloroacetaldehyde
Acetaldehyde, chloro-
107-20-0
P023
Chloroalkyl ethers, N.O.S.
p-Chloroaniline
Benzenamine, 4-chloro-
106-47-8
P024
Chlorobenzene
Benzene, chloro-
108-90-7
UO37
Chlorobenzilate
Benzeneacetic acid, 4-chloro-a-(4-
chloropheny1)-a-hydroxy-, ethyl ester
510-15-6
UO38
p-Chloro-m-cresol
Phenol, 4-chloro-3-methyl-
59-50-7
UO39
JCAR350721-0805030r01
2-Chloroethyl vinyl ether
Ethene, (2-chloroethoxy)-
110-75-8
1)042
Chloroform
Methane, trichloro-
67-66-3
U044
Chloromethyl methyl ether
Methane, chloromethoxy-
107-30-2
U046
P-Chloronaphthalene
Naphthalene, 2-chloro-
91-58-7
U047
o-Chlorophenol
Phenol, 2-chloro-
95-57-8
U048
1-(o-Chlorophenyl)thiourea
Thiourea, (2-chloropheny1)-
5344-82-1
P026
Chloroprene
3-Chloropropionitrile
1,3-Butadiene, 2-chloro-
Propanenitrile, 3-chloro-
126-99-8
542-76-7
P027
Chromium
Same
7440-47-3
Chromium compounds, N.O.S.
Chrysene
Same
218-01-9
U050
Citrus red No. 2
2-Naphthalenol, 1-((2,5-
dimethoxyphenyl)azo)-
6358-53-8
Coal tar creosote
Same
8007-45-2
Copper cyanide
Copper cyanide CuCN
544-92-3
P029
Copper dimethyldithiocarbamate
Creosote
Copper,
bis(dimethylcarbamodithioato-S,S')-,
Same
137-29-1
U051
p-Cresidine
2-Methoxy-5-methylbenzenamine
120-71-8
Cresols (Cresylic acid)
Phenol, methyl-
1319-77-3
U052
Crotonaldehyde
2-Butenal
4170-30-3
U053
m-Cumenyl methylcarbamate
Phenol, 3-(methylethyl)-, methyl
carbamate
64-00-6
P202
Cyanides (soluble salts and
complexes), N.O.S.
P030
Cyanogen
Ethanedinitrile
460-19-5
P031
Cyanogen bromide
Cyanogen bromide (CN)Br
506-68-3
U246
Cyanogen chloride
Cyanogen chloride (CN)C1
506-77-4
P033
Cycasin
p-D-glucopyranoside, (methyl-ONN-
azoxy)methyl-
14901-08-7
Cycloate
Carbamothioic acid, cyclohexylethyl-
, S-ethyl ester
1134-23-2
2-Cyclohexyl-4,6-dinitrophenol
Phenol, 2-cyclohexy1-4,6-dinitro-
131-89-5
P034
Cyclophosphamide
2H-1,3,2-Oxazaphosphorin-2-amine,
N,N-bis(2-chloroethyl)tetrahydro-2-
oxide
50-18-0
U058
2,4-D
Acetic acid, (2,4-dichlorophenoxy)-
94-75-7
U240
2,4-D, salts and esters
Acetic acid, (2,4-dichlorophenoxy)-,
salts and esters
U240
JCAR350721-0805030r01
Daunomycin
5, 12-Naphthacenedione, 8-acety1-10- 20830-81-3
U059
((3-amino-2,3,6-trideoxy-a-L-lyxo-
hexopyranosyl)oxy)-7,8,9,10-
tetrahydro-6,8,11-trihydroxy-l-
methoxy-, 8S-cis)-
Dazomet
2H-1,3,5-thiadiazine-2-thione,
tetrahydro-3,5-dimethyl
533-74-4
DDD
Benzene, 1,1'-(2,2-
dichloroethylidene)bis(4-chloro-
72-54-8
U060
DDE
Benzene, 1,1'-
72-55-9
(dichloroethenylidene)bis(4-chloro-
DDT
Benzene, 1,1'-(2,2,2-
50-29-3
U061
trichloroethylidene)bis(4-chloro-
Diallate
Carbamothioic acid, bis(1-
methylethyl)-, S-(2,3-dichloro-2-
propenyl) ester
2303-16-4
U062
Dibenz(a,h)acridine
Same
226-36-8
Dibenz(a,j)acridine
Same
224-42-0
Dibenz(a,h)anthracene
Same
53-70-3
U063
7H-Dibenzo(c,g)carbazole
Same
194-59-2
Dibenzo(a,e)pyrene
Naphtho(1,2,3,4-def)chrysene
192-65-4
Dibenzo(a,h)pyrene
Dibenzo(b,def)chrysene
189-64-0
Dibenzo(a,i)pyrene
Benzo(rst)pentaphene
189-55-9
U064
1,2-Dibromo-3-chloropropane
Propane, 1,2-dibromo-3-chloro-
96-12-8
U066
Dibutyl phthalate
1,2-Benzenedicarboxylic acid, dibutyl
ester
84-74-2
U069
o-Dichlorobenzene
Benzene, 1,2-dichloro-
95-50-1
U070
m-Dichlorobenzene
Benzene, 1,3-dichloro-
541-73-1
U071
p-Dichlorobenzene
Benzene, 1,4-dichloro-
106-46-7
U072
Dichlorobenzene, N.O.S.
3,3'-Dichlorobenzidine
Benzene, dichloro-
(1,1'-Bipheny1)-4,4'-diamine, 3,3'-
25321-22-6
91-94-1
U073
dichloro-
1,4-Dichloro-2-butene
2-Butene, 1,4-dichloro-
764-41-0
U074
Dichlorodifluoromethane
Methane, dichlorodifluoro-
75-71-8
U075
Dichloroethylene, N.O.S.
Dichloroethylene
25323-30-2
1,1-Dichloroethylene
Ethene, 1,1-dichloro-
75-35-4
U078
1,2-Dichloroethylene
Ethene, 1,2-dichloro-, (E)-
156-60-5
U079
Dichloroethyl ether
Ethane, 1,1'-oxybis(2-chloro-
111-44-4
UO25
Dichloroisopropyl ether
Propane, 2,2'-oxybis(2-chloro-
108-60-1
UO27
Dichloromethoxy ethane
Ethane, 1,11-(methylenebis(oxy))-
bis(2-chloro-
111-91-1
UO24
Dichloromethyl ether
Methane, oxybis(chloro-
542-88-1
P016
2,4-Dichlorophenol
Phenol, 2,4-dichloro-
120-83-2
U081
JCAR350721-0805030r01
2,6-Dichlorophenol
Phenol, 2,6-dichloro-
87-65-0
U082
Dichlorophenylarsine
Arsonous dichloride, phenyl-
696-28-6
P036
Dichloropropane, N.O.S.
Propane, dichloro-
26638-19-7
Dichloropropanol, N.O.S.
Propanol, dichloro-
26545-73-3
Dichloropropene, N.O.S.
1-Propene, dichloro-
26952-23-8
1,3-Dichloropropene
1-Propene, 1,3-dichloro-
542-75-6
U084
Dieldrin
2,7:3,6-Dimethanonaphth(2, 3-
b)oxirene,3,4,5,6,9,9-hexachloro-
la,2,2a,3,6, 6a,7,7a-octahydro-,
(1acc,2(3,2aa,313,613,6acc,713,7aa)-
60-57-1
P037
1,2:3,4-Diepoxybutane
2,2'-Bioxirane
1464-53-5
U085
Diethylarsine
Arsine, diethyl-
692-42-2
P038
Diethylene glycol, dicarbamate
Ethanol, 2,2'-oxybis-, dicarbamate
5952-26-1
U395
1,4-Diethyleneoxide
1,4-Dioxane
123-91-1
U108
Diethylhexyl phthalate
1,2-Benzenedicarboxylic acid, bis(2-
ethylhexyl) ester
117-81-7
UO28
N,N'-Diethylhydrazine
Hydrazine, 1,2-diethyl-
1615-80-1
U086
O,O-Diethyl-S-methyl
dithiophosphate
Phosphorodithioic acid, 0,0-diethyl
S-methyl ester
3288-58-2
U087
Diethyl-p-nitrophenyl phosphate
Phosphoric acid, diethyl 4-
nitrophenyl ester
311-45-5
PO41
Diethyl phthalate
I,2-Benzenedicarboxylic acid, diethyl
ester
84-66-2
U088
0,0-Diethyl 0-pyrazinyl
phosphorothioate
Phosphorothioic acid, 0,0-diethyl 0-
pyrazinyl ester
297-97-2
PO40
Diethylstilbestrol
Phenol, 4,4'-(1,2-diethy1-1,2-
ethenediy1)bis-, (E)-
56-53-1
U089
Dihydrosafrole
1,3-Benzodioxole, 5-propyl-
94-58-6
U090
Diisopropylfluorophosphate (DFP)
Phosphorofluoridic acid, bis(1-
methylethyl) ester
55-91-4
PO43
Dimethoate
Phosphorodithioic acid, 0,0-
dimethyl S-(2-(methylamino)-2-
oxoethyl) ester
60-51-5
PO44
3,3'-Dimethoxybenzidine
(1,1'-Biphenyl)-4,4'-diamine, 3,3'-
119-90-4
U091
dimethoxy-
p-Dimethylaminoazobenzene
Benzenamine, N,N-dimethy1-4-
60-11-7
U093
(phenylazo)-
2,4-Dimethylaniline (2,4-xylidine)
7,12-Dimethylbenz(a)anthracene
Benzenamine, 2,4-dimethyl-
Benz(a)anthracene, 7,12-dimethyl-
95-68-1
57-97-6
U094
3,3'-Dimethylbenzidine
(1,1 1
-Bipheny1)-4,4'-diamine, 3,3'-
119-93-7
U095
dimethyl-
Dimethylcarbamoyl chloride
Carbamic chloride, dimethyl-
79-44-7
U097
JCAR350721-0805030r01
1,1-Dimethylhydrazine
Hydrazine, 1,1-dimethyl-
57-14-7
U098
1,2-Dimethylhydrazine
Hydrazine, 1,2-dimethyl-
540-73-8
U099
a,a-Dimethylphenethylamine
Benzeneethanamine, a, a-dimethyl-
122-09-8
PO46
2,4-Dimethylphenol
Phenol, 2,4-dimethy1-
105-67-9
U101
Dimethylphthalate
1,2-Benzenedicarboxylic acid,
dimethyl ester
131-11-3
U102
Dimethyl sulfate
Sulfuric acid, dimethyl ester
77-78-1
U103
Dimetilan
Carbamic acid, dimethyl-, 1-
644-64-4
P191
((dimethylamino) carbony1)-5-
methy1-1H-pyrazol-3-y1 ester
Dinitrobenzene, N.O.S.
Benzene, dinitro-
25154-54-5
4,6-Dinitro-o-cresol
Phenol, 2-methy1-4,6-dinitro-
534-52-1
PO47
4,6-Dinitro-o-cresol salts
PO47
2,4-Dinitrophenol
Phenol, 2,4-dinitro-
51-28-5
PO48
2,4-Dinitrotoluene
Benzene, 1-methy1-2,4-dinitro-
121-14-2
U105
2,6-Dinitrotoluene
Benzene, 2-methy1-1,3-dinitro-
606-20-2
U106
Dinoseb
Phenol, 2-(1-methylpropy1)-4,6-
88-85-7
P020
dinitro-
Di-n-octyl phthalate
1,2-Benzenedicarboxylic acid, dioctyl
ester
117-84-0
U107
Diphenylamine
Benzenamine, N-phenyl-
122-39-4
1,2-Diphenylhydrazine
Hydrazine, 1,2-diphenyl-
122-66-7
U109
Di-n-propylnitrosamine
1-Propanamine, N-nitroso-N-propyl-
621-64-7
U111
Disulfiram
Thioperoxydicarbonic diamide,
tetraethyl
97-77-8
D sulfoton
Phosphorodithioic acid, 0,0-diethyl
298-04-4
P039
S-(2-(ethylthio)ethyl) ester
Dithiobiuret
Thioimidodicarbonic diamide
541-53-7
PO49
((H2N)C(S))2NH
Endosulfan
Endothal
6, 9-Methano-2,4,3-
benzodioxathiepen,6,7,8,9,10,10-
hexachloro-1,5,5a,6,9,9a-hexahydro-,
3-oxide,
7-Oxabicyclo(2.2.1)heptane-2,3-
dicarboxylic acid
115-29-7
145-73-3
P050
P088
Endrin
Endrin metabolites
2,7:3,6-Dimethanonaphth(2,3-
b)oxirene, 3,4,5,6,9,9-hexachloro-
1a,2,2a,3,6,6a,7,7a-octahydro-, (1a
cc,2[3,24,3cc,6a,64,7[3,7aa)-,
72-20-8
P051
P051
Epichlorohydrin
Oxirane, (chloromethyl)-
106-89-8
U041
Epinephrine
1,2-Benzenediol, 4-(1-hydroxy-2-
51-43-4
PO42
(methylamino)ethyl)-, (R)-
14484-64-1
206-44-0
7782-41-4
640-19-7
62-74-8
50-00-0
23422-53-9
U120
P056
P057
P058
U122
P198
JCAR350721-0805030r01
EPTC
Ethyl carbamate (urethane)
Ethyl cyanide
Ethylenebisdithiocarbamic acid
Carbamothioic acid, dipropyl-, S-
ethyl ester
Carbamic acid, ethyl ester
Propanenitrile
Carbamodithioic acid, 1,2-
ethanediylbis-
759-94-4
51-79-6
107-12-0
111-54-6
U238
P101
U114
Ethane, 1,2-dibromo-
Ethane, 1,2-dichloro-
Ethanol, 2-ethoxy-
Aziridine
Oxirane
2-Imidazolidinethione
Ethane, 1,1-dichloro-
2-Propenoic acid, 2-methyl-, ethyl
ester
Methanesulfonic acid, ethyl ester
Zinc, bis(diethylcarbamodithioato-
S,S')-
Phosphorothioc acid, 0-(4-
((dimethylamino)sulfonyl)phenyl)
0,0-dimethyl ester
Iron, tris(dimethylcarbamodithioato-
S,S')-,
Same
Same
Acetamide, 2-fluoro-
Acetic acid, fluoro-, sodium salt
Same
Methanimidamide, N,N-dimethyl-N'-
(3-(((methylamino)-carbonyl)
oxy)phenyl)-, monohydrochloride
Same
Methanimidamide, N,N-dimethyl-N'-
(2-methy1-4-(((methylamino)
carbonyfloxy)pheny1)-
Oxiranecarboxaldehyde
4,7-Methano-1H-indene,1,4,5,6,7,8,8-
heptachloro-3 a,4,7,7a-tetrahydro-
Ethylenebisdithiocarbamic acid,
salts and esters
Ethylene dibromide
Ethylene dichloride
Ethylene glycol monoethyl ether
Ethyleneimine
Ethylene oxide
Ethylenethiourea
Ethylidine dichloride
Ethyl methacrylate
Ethyl methanesulfonate
Ethyl Ziram
Famphur
Ferbam
Fluoranthene
Fluorine
Fluoroacetamide
Fluoroacetic acid, sodium salt
Formaldehyde
Formetanate hydrochloride
Formic acid
Formparanate
Glycidylaldehyde
Halomethanes, N.O.S.
Heptachlor
U114
106-93-4
U067
107-06-2
110-80-5
U359
151-56-4
P054
75-21-8
U115
96-45-7
U116
75-34-3
U076
97-63-2
U118
62-50-0
U119
14324-55-1
U407
52-85-7
P097
64-18-16
U123
17702-57-7
P197
765-34-4
U126
76-44-8
P059
JCAR350721-0805030r01
Heptachlor epoxide
2,5-Methano-2H-indeno(1, 2b)oxirene, 1024-57-3
2,3,4,5,6,7,7-heptachloro-
1a,lb,5,5a,6,6a-hexahydro-,
(1aa,1141,2cc,5a,5a(3,613,6aa)-
Heptachlor epoxide (a,
and
y
isomers)
Heptachlorodibenzofurans
Heptachlorodibenzo-p-dioxins
Hexachlorobenzene
Benzene, hexachloro-
118-74-1
U127
Hexachlorobutadiene
1,3-Butadiene, 1,1,2,3,4,4-
hexachloro-
87-68-3
U 128
Hexachlorocyclo-pentadiene
1,3-Cyclopentadiene, 1,2,3,4,5,5-
hexachloro-
77-47-4
U130
Hexachlorodibenzo-p-dioxins
Hexachlorodibenzofurans
Hexachloroethane
Ethane, hexachloro-
67-72-1
U131
Hexachlorophene
Phenol, 2,2'-methylenebis(3,4,6-
trichloro-
70-30-4
U132
Hexachloropropene
1-Propene, 1,1,2,3,3,3-hexachloro-
1888-71-7
U243
Hexaethyltetraphosphate
Tetraphosphoric acid, hexaethyl ester
757-58-4
P062
Hydrazine
Same
302-01-2
U133
Hydrogen cyanide
Hydrocyanic acid
74-90-8
P063
Hydrogen fluoride
Hydrofluoric acid
7664-39-3
U134
Hydrogen sulfide
Hydrogen sulfide H2S
7783-06-4
U135
Indeno(1,2,3-cd)pyrene
Same
193-39-5
U137
3-Iodo-2-propynyl-n-
butylcarbamate
Carbamic acid, butyl-, 3-iodo-2-
propynyl ester
55406-53-6
Isobutyl alcohol
1-Propanol, 2-methyl-
78-83-1
U140
Isodrin
1,4:5,8-
465-73-6
P060
Isolan
Dimethanonaphthalene,1,2,3,4,10,10-
hexachloro-1,4,4a,5,8,8a-hexahydro-,
(1a,4a,44,5[3,813,8a(3)-,
Carbamic acid, dimethyl-, 3-methyl-
119-38-0
P192
1-(1-methylethyl)-1H-pyrazol-5-y1
ester
Isosafrole
1,3-Benzodioxole, 5-(1-propeny1)-
120-58-1
U141
Kepone
1,3,4-Metheno-2H-
cyclobuta(cd)pentalen-2-one,
1,1a,3,3a,4,5,5,5a,5b,6-
decachlorooctahydro-,
143-50-0
U142
JCAR350721-0805030r01
Lasiocarpine
2-Butenoic acid, 2-methyl-, 74(2,3-
303-34-4
U143
dihydroxy-2-(1-methoxyethyl)-3-
methyl-l-oxobutoxy)methyl)-
303-344
2,3,5,7a-tetrahydro-lH-pyrrolizin-1-y1
ester, (1S41 -a(Z),7(2S*,3R*),7aa))-
Lead
Same
7439-92-1
Lead and compounds, N.O.S.
Lead acetate
Acetic acid, lead (2+) salt
301-04-2
U144
Lead phosphate
Phosphoric acid, lead (2+) salt (2:3)
7446-27-7
U145
Lead subacetate
Lead, bis(acetato-O)tetrahydroxytri-
1335-32-6
U146
Lindane
Cyclohexane, 1,2,3,4,5,6-hexachloro-, 58-89-9
1 a,2cc,313,4a,5a,6[3)-
U129
Maleic anhydride
2,5-Furandione
108-31-6
U147
Maleic hydrazide
3,6-Pyridazinedione, 1,2-dihydro-
123-33-1
U148
Malononitrile
Propanedinitrile
109-77-3
U 149
Manganese
dimethyldithiocarbamate
Melphalan
Manganese,
bis(dimethylcarbamodithioato-S,S')-,
L-Phenylalanine, 4-(bis(2-
chloroethyl)amino)-
15339-36-3
148-82-3
P196
U150
Mercury
Same
7439-97-6
U151
Mercury compounds, N.O.S.
Mercury fulminate
Fulminic acid, mercury (2+) salt
628-86-4
P065
Metam Sodium
Carbamodithioic acid, methyl-,
monosodium salt
137-42-8
Methacrylonitrile
2-Propenenitrile, 2-methyl-
126-98-7
U152
Methapyrilene
1,2-Ethanediamine, N,N-dimethyl-N'-
91-80-5
U155
2-pyridinyl-N42-thienylmethyl)-
Methiocarb
Phenol, (3,5-dimethyl-4-(methylthio)-
2032-65-7
P199
, methylcarbamate
Metholmyl
Ethanimidothioic acid, N-
16752-77-5
P066
(((methylamino)carbonyl)oxy)-,
methyl ester
Methoxychlor
Benzene, 1,1'-(2,2,2-
trichloroethylidene)bis(4-methoxy-
72-43-5
U247
Methyl bromide
Methane, bromo-
74-83-9
UO29
Methyl chloride
Methane, chloro-
74-87-3
U045
Methylchlorocarbonate
Carbonochloridic acid, methyl ester
79-22-1
U156
Methyl chloroform
Ethane, 1,1,1-trichloro-
71-55-6
U226
3-Methylcholanthrene
Benz(j)aceanthrylene, 1,2-dihydro-3-
methyl-
56-49-5
U157
4,4'-Methylenebis(2-chloroaniline)
Benzenamine, 4,4'-methylenebis(2-
chloro-
101-14-4
U158
Methylene bromide
Methane, dibromo-
74-95-3
U068
JCAR350721-0805030r01
Methylene chloride
Methane, dichloro-
75-09-2
U080
Methyl ethyl ketone (MEK)
2-Butanone
78-93-3
U159
Methyl ethyl ketone peroxide
2-Butanone, peroxide
1338-23-4
U160
Methyl hydrazine
Hydrazine, methyl-
60-34-4
P068
Methyl iodide
Methane, iodo-
74-88-4
U138
Methyl isocyanate
Methane, isocyanato-
624-83-9
P064
2-Methyllactonitrile
Propanenitrile, 2-hydroxy-2-methy1-
75-86-5
P069
Methyl methacrylate
2-Propenoic acid, 2-methyl-, methyl
ester
80-62-6
U162
Methyl methanesulfonate
Methanesulfonic acid, methyl ester
66-27-3
Methyl parathion
Phosphorothioic acid, 0,0-dimethyl
298-00-0
P071
O-(4-nitrophenyl) ester
Methylthiouracil
4-(1H)-Pyrimidinone, 2,3-dihydro-6-
methy1-2-thioxo-
56-04-2
U 164
Metolcarb
Carbamic acid, methyl-, 3-
methylphenyl ester
1129-41-5
P190
Mex acarbate
Phenol, 4-(dimethylamino)-3,5-
dimethyl-, methylcarbamate (ester)
315-18-4
P128
Mitomycin C
Azirino(2', 3':3, 4)pyrrolo(1, 2-
a)indole-4, 7-dione, 6-amino-8-
50-07-7
U010
(((aminocarbonyl)oxy)methyl)-
Molinate
1,1a,2,8,8a,8b-hexahydro-8a-
methoxy-5-methyl-, (1a-S-
(laa,8(3,8aa,8ba))-,
1H-Azepine-l-carbothioic acid,
hexahydro-, S-ethyl ester
2212-67-1
MNNG
Guanidine, N-methyl-N'-nitro-N-
nitroso-
70-25-7
U163
Mustard gas
Ethane, 1,1'-thiobis(2-chloro-
505-60-2
U165
Naphthalene
Same
91-20-3
U165
1,4-Naphthoquinone
1,4-Naphthalenedione
130-15-4
U166
a-Naphthylamine
1-Naphthalenamine
134-32-7
U167
P-Naphthylamine
2-Naphthalenamine
91-59-8
U 168
cc-Naphthylthiourea
Thiourea, 1-naphthalenyl-
86-88-4
P072
Nickel
Same
7440-02-0
Nickel compounds, N.O.S.
Nickel carbonyl
Nickel carbonyl Ni(CO)
4
, (T-4)-
13463-39-3
P073
Nickel cyanide
Nickel cyanide Ni(CN)
2
557-19-7
P074
Nicotine
Pyridine, 3-(1-methyl-2-pyrrolidinyl)-,
(S)-
54-11-5
P075
Nicotine salts
P075
Nitric oxide
Nitrogen oxide NO
10102-43-9
P076
p-Nitroaniline
Benzenamine, 4-nitro-
100-01-6
P077
JCAR350721-0805030r01
Nitrobenzene
Benzene, nitro-
98-95-3
P078
Nitrogen dioxide
Nitrogen oxide NO2
10102-44-0
P078
Nitrogen mustard
Ethanamine, 2-chloro-N-(2-
chloroethyl)-N-methyl-
51-75-2
Nitrogen mustard, hydrochloride
salt
Nitrogen mustard N-oxide
Ethanamine, 2-chloro-N-(2-
chloroethyl)-N-methyl-, N-oxide
126-85-2
Nitrogen mustard, N-oxide,
hydrochloride salt
Nitroglycerin
1,2,3-Propanetriol, trinitrate
55-63-0
P081
p-Nitrophenol
Phenol, 4-nitro-
100-02-7
U170
2-Nitropropane
Propane, 2-nitro-
79-46-9
U171
Nitrosamines, N.O.S.
35576-91-1
N-Nitrosodi-n-butylamine
1-Butanamine, N-butyl-N-nitroso-
924-16-3
U172
N-Nitrosodiethanolamine
Ethanol, 2,2'-(nitrosoimino)bis-
1116-54-7
U173
N-Nitrosodiethylamine
Ethanamine, N-ethyl-N-nitroso-
55-18-5
U174
N-Nitrosodimethylamine
Methanamine, N-methyl-N-nitroso-
62-75-9
P082
N-Nitroso-N-ethylurea
Urea, N-ethyl-N-nitroso-
759-73-9
U176
N-Nitrosomethylethylamine
Ethanamine, N-methyl-N-nitroso-
10595-95-6
N-Nitroso-N-methylurea
Urea, N-methyl-N-nitroso-
684-93-5
U177
N-Nitroso-N-methylurethane
Carbamic acid, methylnitroso-, ethyl
ester
615-53-2
U178
N-Nitrosomethylvinylamine
Vinylamine, N-methyl-N-nitroso-
4549-40-0
P084
N-Nitrosomorpholine
Morpholine, 4-nitroso-
59-89-2
N-Nitrosonornicotine
Pyridine, 3-(1-nitroso-2-pyrrolidiny1)-,
(S)-
16543-55-8
N-Nitrosopiperidine
Piperidine, 1-nitroso-
100-75-4
U179
N-Nitrosopyrrolidine
N-Nitrososarcosine
Pyrrolidine, 1-nitroso-
Glycine, N-methyl-N-nitroso-
930-55-2
13256-22-9
U180
5-Nitro-o-toluidine
Benzenamine, 2-methy1-5-nitro-
99-55-8
U181
Octachlorodibenzo-p-dioxin
(OCDD)
1,2,3,4,6,7,8,9-Octachlorodibenzo-p-
dioxin.
3268-87-9
Octachlorodibenzofuran (OCDF)
1,2,3,4,6,7,8,9-
39001-02-0
Octachlorodibenzofuran.
Octamethylpyrophosphoramide
Diphosphoramide, octamethyl-
152-16-9
P085
Osmium tetroxide
Osmium oxide 050
4
, (T-4)
20816-12-0
P087
Oxamyl
Ethanimidothioc acid, 2-
23135-22-0
P194
(dimethylamino)-N-
(((methylamino)carbonyl)oxy)-2-oxo-
, methyl ester
Paraldehyde
1,3,5-Trionne, 2,4,6-trimethyl-
123-63-7
U182
JCAR350721-0805030r01
Parathion
Phosphorothioic acid, 0,0-diethyl 0-
56-38-2
P089
(4-nitrophenyl) ester
Pebulate
Carbamothioic acid, butylethyl-, S-
propyl ester
1114-71-2
Pentachlorobenzene
Benzene, pentachloro-
608-93-5
U183
Pentachlorodibenzo-p-dioxins
Pentachlorodibenzofurans
Pentachloroethane
Ethane, pentachloro-
76-01-7
U184
Pentachloronitrobenzene (PCNB)
Benzene, pentachloronitro-
82-68-8
U185
Pentachlorophenol
Phenol, pentachloro-
87-86-5
See F027
Phenacetin
Acetamide, N-(4-ethoxypheny1)-
62-44-2
U187
Phenol
Same
108-95-2
U188
Phenylenediamine
Benzenediamine
25265-76-3
1,2-Phenylenediamine
1,2-Benzenediamine
95-54-5
1,3-Phenylenediamine
1,3-Benzenediamine
108-45-2
Phenylmercury acetate
Mercury, (acetato-O)phenyl-
62-38-4
P092
Phenylthiourea
Thiourea, phenyl-
103-85-5
P093
Phosgene
Carbonic dichloride
75-44-5
P095
Phosphine
Same
7803-51-2
P096
Phorate
Phosphorodithioic acid, 0,0-diethyl
298-02-2
P094
S-((ethylthio)methyl) ester
Phthalic acid esters, N.O.S.
Phthalic anhydride
1,3-Isobenzofurandione
85-44-9
U 190
Physostigmine
Pyrrolo(2,3-b)indol-5-ol,
1,2,3,3a,8,8a-hexahydro-1,3a,8-
trimethyl-, methylcarbamate (ester),
(3aS-cis)-
57-47-6
P204
Physostigmine salicylate
Benzoic acid, 2-hydroxy-, compound
with (3aS-cis)-1,2,3,3a,8,8a-
hexahydro-1,3a,8-
trimethylpyrrolo(2,3-b)indo1-5-y1
methylcarbamate ester (1:1)
57-64-7
P188
2-Picoline
Pyridine, 2-methyl-
109-06-8
U191
Polychlorinated biphenyls, N.O.S.
Potassium cyanide
Same
151-50-8
P098
Potassium dimethyldithiocarbamate
Carbamodithioc acid, dimethyl,
potassium salt
128-03-0
Potassium n-hydroxymethyl-n-
methyl-dithiocarbamate
Carbamodithioc acid,
(hydroxymethyl)methyl-,
monopotassium salt
51026-28-9
Potassium n-
methyl dithiocarbamate
Carbamodithioc acid, methyl-
monopotassium salt
137-41-7
JCAR350721-0805030r01
Potassium silver cyanide
Argentate(1-), bis(cyano-C)-,
potassium)
506-61-6
P099
Potassium pentachlorophenate
Pentachlorophenol, potassium salt
7778736
None
Promecarb
Phenol, 3-methyl-5-(1-methylethyl)-,
methyl carbamate
2631-37-0
P201
Pronamide
Benzamide, 3,5-dichloro-N-(1,1-
dimethy1-2-propyny1)-
23950-58-5
U192
1,3-Propane sultone
1,2-Oxathiolane, 2,2-dioxide
1120-71-4
U193
Propham
Carbamic acid, phenyl-, 1-
methylethyl ester
122-42-9
U373
Propoxur
Phenol, 2-(1-methylethoxy)-,
methylcarbamate
114-26-1
U411
n-Propylamine
1-Propanamine
107-10-8
U194
Propargyl alcohol
2-Propyn-l-ol
107-19-7
P102
Propylene dichloride
Propane, 1,2-dichloro-
78-87-5
U083
1,2-Propylenimine
Aziridine, 2-methyl-
75-55-8
P067
Propylthiouracil
4(1 H)-Pyrimidinone, 2,3-dihydro-6-
51-52-5
propy1-2-thioxo-
Prosulfocarb
Carbamothioic acid, dipropyl-, 5-
52888-80-9
U387
(phenylmethyl) ester
Pyridine
Same
110-86-1
U196
Reserpine
Resorcinol
Yohimban-16-carboxylic acid, 11,17-
dimethoxy-184(3,4,5-
trimethoxybenzoyfloxy)-, methyl
ester, (313,16[3,17a,18(3,20a)-,
1,3-Benzenediol
50-55-5
108-46-3
U200
U201
Saccharin
1,2-Benzisothiazol-3(2H)-one, 1,1-
dioxide
81-07-2
U202
Saccharin salts
U202
Safrole
1,3-Benzodioxole, 5-(2-propenyl)-
94-59-7
U203
Selenium
Same
7782-49-2
Selenium compounds, N.O.S.
Selenium dioxide
Selenious acid
7783-00-8
U204
Selenium sulfide
Selenium sulfide SeS2
7488-56-4
U205
Selenium, tetrakis(dimethyl-
dithiocarbamate
Carbamodithioic acid, dimethyl-,
tetraanhydrosulfide with
orthothioselenious acid
144-34-3
Selenourea
Same
630-10-4
P103
Silver
Same
7440-22-4
Silver compounds, N.O.S.
Silver cyanide
Silver cyanide AgCN
506-64-9
P104
Si1N/ex (2,4,5-TP)
Propanoic acid, 242,4,5-
trichlorophenoxy)-
93-72-1
See F027
JCAR350721-0805030r01
Sodium cyanide
Sodium cyanide NaCN
143-33-9
P106
Sodium dibutyldithiocarbamate
Carbamodithioic acid, dibutyl-,
sodium salt
136-30-1
Sodium diethyldithiocarbamate
Carbamodithioic acid, diethyl-,
sodium salt
148-18-5
Sodium dimethyldithiocarbamate
Carbamodithioic acid, dimethyl-,
sodium salt
128-04-1
Sodium pentachlorophenate
Pentachlorophenol, sodium salt
131522
None
Streptozotocin
D-Glucose, 2-deoxy-2-
18883-66-4
U206
(((methylnitrosoamino)carbonyl)
amino)-
Strychnine
Strychnidin-10-one
57-24-9
P108
Strychnine salts
P108
Sulfallate
Carbamodithioic acid, diethyl-, 2-
chloro-2-propenyl ester
95-06-7
TCDD
Dibenzo(b,e)(1,4)dioxin, 2,3,7,8-
tetrachloro-
1746-01-6
Tetrabutylthiuram disulfide
Thioperoxydicarbonic diamide,
tetrabutyl
1634-02-2
Tetramethylthiuram monosulfide
Bis(dimethylthiocarbamoyl) sulfide
97-74-5
1,2,4,5-Tetrachlorobenzene
Benzene, 1,2,4,5-tetrachloro-
95-94-3
U207
Tetrachlorodibenzo-p-dioxins
Tetrachlorodibenzofurans
Tetrachloroethane, N.O.S.
Ethane, tetrachloro-, N.O.S.
25322-20-7
1,1,1,2-Tetrachloroethane
Ethane, 1,1,1,2-tetrachloro-
630-20-6
U208
1,1,2,2-Tetrachloroethane
Ethane, 1,1,2,2-tetrachloro-
79-34-5
U209
Tetrachloroethylene
Ethene, tetrachloro-
127-18-4
U210
2,3,4,6-Tetrachlorophenol
Phenol, 2,3,4,6-tetrachloro-
58-90-2
See F027
2,3,4,6-Tetrachlorophenol,
potassium salt
Same
53535276
None
2,3,4,6-Tetrachlorophenol, sodium
salt
Same
25567559
None
Tetraethyldithiopyrophosphate
Thiodiphosphoric acid, tetraethyl
ester
3689-24-5
P109
Tetraethyl lead
Plumbane, tetraethyl-
78-00-2
P110
Tetraethylpyrophosphate
Diphosphoric acid, tetraethyl ester
107-49-3
P111
Tetranitromethane
Methane, tetranitro-
509-14-8
P112
Thallium
Same
7440-28-0
Thallium compounds
Thallic oxide
Thallium oxide T1203
1314-32-5
P113
Thallium (I) acetate
Acetic acid, thallium (1+) salt
563-68-8
U214
Thallium (I) carbonate
Carbonic acid, dithallium (1+) salt
6533-73-9
U215
Thallium (I) chloride
Thallium chloride TIC1
7791-12-0
U216
JCAR350721-0805030r01
Thallium (I) nitrate
Nitric acid, thallium (1+) salt
10102-45-1
U217
Thallium selenite
Selenious acid, dithallium (1+) salt
12039-52-0
P114
Thallium (I) sulfate
Sulfuric acid, dithallium (1+) salt
7446-18-6
P115
Thioacetamide
Ethanethioamide
62-55-5
U218
Thiodicarb
Ethanimidothioic acid, N,N'-
59669-26-0
U410
(thiobis((methylimino)carbonyloxy))-
bis-, dimethyl ester
Thiofanox
2-Butanone, 3,3-dimethy1-1-
39196-18-4
PO45
(methylthio)-, 0-
((methylamino)carbonyfloxime
Thiophanate-methyl
Carbamic acid, (1,2-
phyenylenebis(iminocarbonothioy1))-
bis-, dimethyl ester
23564-05-8
U409
Thiomethanol
Methanethiol
74-93-1
U153
Thiophenol
Benzenethiol
108-98-5
P014
Thiosemicarbazide
Hydrazinecarbothioamide
79-19-6
P116
Thiourea
Same
62-56-6
P219
Thiram
Thioperoxydicarbonic diamide
137-26-8
U244
((42N)C(S))2S2, tetramethyl-
Tirpate
1,3-Dithiolane-2-carboxaldehyde,
2,4-dimethyl-, 0-
26419-73-8
P185
((methylamino)carbonyl) oxime
Toluene
Benzene, methyl-
108-88-3
U220
Toluenediamine
Benzenediamine, ar-methyl-
25376-45-8
U221
Toluene-2,4-diamine
1,3-Benzenediamine, 4-methyl-
95-80-7
Toluene-2,6-diamine
1,3-Benzenediamine, 2-methyl-
823-40-5
Toluene-3,4-diam ine
1,2-Benzenediamine, 4-methyl-
496-72-0
Toluene diisocyanate
Benzene, 1,3-diisocyanatomethyl-
26471-62-5
U223
o-Toluidine
Benzenamine, 2-methyl-
95-53-4
U328
o-Toluidine hydrochloride
Benzeneamine, 2-methyl-,
hydrochloride
636-21-5
U222
p-Toluidine
Benzenamine, 4-methyl-
106-49-0
U353
Toxaphene
Same
8001-35-2
P123
Triallate
Carbamothioic acid, bis(1-
methylethyl)-, S-(2,3,3-trichloro-2-
propenyl) ester
2303-17-5
U389
1,2,4-Trichlorobenzene
Benzene, 1,2,4-trichloro-
120-82-1
1,1,2-Trichloroethane
Ethane, 1,1,2-trichloro-
79-00-5
U227
Trichloroethylene
Ethene, trichloro-
79-01-6
U228
Trichloromethanethiol
Methanethiol, trichloro-
75-70-7
P118
Trichloromonofluoromethane
Methane, trichlorofluoro-
75-69-4
U121
2,4,5-Trichlorophenol
Phenol, 2,4,5-trichloro-
95-95-4
See F027
2,4,6-Trichlorophenol
Phenol, 2,4,6-trichloro-
88-06-2
See F027
JCAR350721-0805030r01
2,4,5-T
Acetic acid, (2,4,5-trichlorophenoxy)- 93-76-5
See F027
Trichloropropane, N.O.S.
25735-29-9
1,2,3-Trichloropropane
Triethylamine
O,O,O-Triethylphosphorothioate
Propane, 1,2,3-trichloro-
Ethanamine, N,N-diethyl-
Phosphorothioic acid, 0,0,0-triethyl
ester
96-18-4
121-44-8
126-68-1
U404
1,3,5-Trinitrobenzene
Tris(1-aziridinyl)phosphine sulfide
Benzene, 1,3,5-trinitro-
Aziridine, 1,1',1"-
phosphinothioylidynetris-
99-35-4
52-24-4
U234
Tris(2,3-dibromopropyl) phosphate
1 -Propanol, 2,3-dibromo-, phosphate
126-72-7
U235
(3:1)
Trypan blue
2,7-Naphthalenedisulfonic acid, 3,3'-
72-57-1
U236
((3,3'-dimethyl(1,1'-bipheny1)-4,41-
diy1)bis(azo))bis(5-amino-4-
hydroxy)-, tetrasodium salt
Uracil mustard
2,4-(1H,3H)-Pyrimidinedione, 5-
66-75-1
U237
(bis(2-chloroethyl)amino)-
Vanadium pentoxide
Vanadium oxide V205
1314-62-1
P120
Vernolate
Carbamothioc acid, dipropyl-, S-
propyl ester
1929-77-7
Vinyl chloride
Ethene, chloro-
75-01-4
U043
Warfarin
2H-1-Benzopyran-2-one, 4-hydroxy-
3-(3-oxo-l-phenylbuty1)-, when
present at concentrations less than 0.3
percent
81-81-2
U248
Warfarin
2H-1-Benzopyran-2-one, 4-hydroxy-
3-(3-oxo-l-phenylbuty1)-, when
present at concentrations greater than
81-81-2
P001
0.3 percent
Warfarin salts, when present at
concentrations less than 0.3 percent
U248
Warfarin salts, when present at
concentrations greater than 0.3
percent
P001
Zinc cyanide
Zinc cyanide Zn(CN)2
557-21-1
P121
Zinc phosphide
Zinc phosphide P
2 Zn3 , when present
at concentrations greater than 10
percent
1314-84-7
P122
Zinc phosphide
Zinc phosphide P2Zn
3, when present
at concentrations of 10 percent or less
1314-84-7
U249
Ziram
Zinc, bis(dimethylcarbamodithioato-
137-30-4
P205
S,S')- (T-4)-
2742
JCAR350721-0805030r01
2743
Note: The abbreviation N.O.S. (not otherwise specified) signifies those members of the general
2744
class that are not specifically listed by name in this Section.
2745
2746
(Source: Amended at 32 III. Reg.
, effective
